Attachment mounting clamp | SM 1753-5
from €9.45*
€10.16*
Available in 5 days
Delivery time: See variant in the table
This product is available in 26 versions.
Product information "Attachment mounting clamp | SM 1753-5"
from Aluminum
material:AL: Aluminum
mounting clamp
ELSW = black anodized
MT = matte finish, tumbled
Socket cap screws ISO 4762: stainless steel A2 / AISI 304
Mounting clamps SM 1753-5 are intended for mounting sensor holders SM 1756-2 and retaining plates SM 1756-1, among other things.
They have a central thread and an additional hole pattern 4 x M4 from hole d1 = B15.
The standard version of the clamping screw is a socket head cap screw with hexagon socket DIN 912.
It can be replaced by a clamping lever set SM 1759-1 (see dimensions table for order designation).
The clamping hole is additionally equipped with a square.
RoHS compliant: yes
Similar Items
Cross clamp holder, rotatable | SM 1753-4
€26.33*
incl. VAT
Colour / Surface:
Matt/matte
|
Diameter 1:
10
|
Diameter 2:
08
Twistable two-way mounting clampfrom AluminumMaterialAL: Aluminummounting clampELSW = black anodizedMT = matte finish, tumbledSocket cap screws DIN 912: stainless steel A2 / AISI 304Grub screw DIN 915: stainless steel 1.4301 / AISI 304The twistable cross clamp holders SM 1753-4 connect rods and tubes within the clamp holder system at any adjustable angle. When the angle adjustment is released, the clamp holder halves remain positively connected. The clamping screws of the clamping threads d3 / d4 are socket head cap screws with hexagon socket DIN 912 in the standard version. They can be replaced by a clamping lever set SM 1759-1 (see dimensions table for order designation).RoHS compliant: yes
Variants from €23.19*
incl. VAT
Clamp holder | SM 1753-6
€9.59*
incl. VAT
Colour / Surface:
Schwarz_elo
|
Diameter 1:
08
|
Diameter 2:
M04
Mounting Clampfrom AluminumMaterialAL: Aluminummounting clampELSW = black anodizedMT = matte finish, tumbledThe SM 1753-6 clamp holders are not threaded. They are fastened or clamped using two threads on the mounting side. The clamping holes are additionally equipped with a square.The hole spacing m is matched to the SM 1751 foot clamp bracketsSM 1757 flange bolts SM 1754-4 foot lug clamp bracketsSM 1758 holding magnets.
RoHS compliant: yes
Variants from €6.87*
incl. VAT
Accessories
Clamping kit | SM 1759-1
€6.18*
incl. VAT
Diameter 1:
M04
|
Length 1:
22
|
Length 2:
16
Adjustable clamping lever setwith screwfor clamp holderMaterialHandle: Die-cast zincpowder coated, textured finishSB = silver RAL 9006Screw insert: stainless steel 1.4305 / AISI 303Retaining screw: stainless steel 1.4305 / AISI 303Distance sleeve: stainless steel 1.4305 / AISI 303Clamping lever sets SM 1759-1 replace the hexagon socket head cap screws DIN 912 in clamping holders. They are used in all clamping points when repeated clamping is required, e.g. to adjust a stop. Lubricating the threads and the contact surface of the clamping lever increases the clamping force and reduces wear.You will find a recommendation for the right clamping lever set for each clamping thread in the dimension tables for the clamping holders.RoHS compliant: yes
Variants from €5.70*
incl. VAT
