Go to homepage
About us
★ Jobs

Drill bushing - DIN 179 B | SM 1000 B

from €1.57*

Quantity Unit price
To 49
€13.22*
To 99
€12.55*
To 199
€11.23*
To 499
€10.58*
From 500
€9.26*

Prices incl. VAT plus shipping costs

Available in 28 days

Delivery time: See variant in the table
This product is available in 1764 versions.
Show all variants
Form
Inside Diameter
Length
Outside Diameter
Product number: 42241

Description Datasheet CAD data
Filter
Product information "Drill bushing - DIN 179 B | SM 1000 B"

Positioning bush
DIN 179 / ISO 4247 Form B
cylindrical, hardened

Material:
Special steel
hardened and ground
Hardness: HRc 63±1

Form B: with two radiuses without grooves
Form A: with one radius without grooves   
you will find as an extra article Drill bushing DIN 179 A | SM 1000 A

RoHS-compliant: yes

Locating hole in the workpiece to ISO tolerance H6 or H7. For other dimension combinations, see SM 1005.

Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.

Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.

Assembly:
the drill diameter should correspond to the bushing diameter,
press in the bushing angular with a flat mandrel.

on request
Form CA: with one radius, additionally with grooves for gluing
Form CB: with two radiuses, additionally with grooves for gluing
Form CVA: with one radius, additionally with grooves and locking device
Form CVB: with two radiuses, additionally with grooves and locking device

CAD data

Similar Items

CAD Data
Drill bushing - DIN 179 A | SM 1000 A
Drill bushing - DIN 179 A | SM 1000 A
Form: A | Inside Diameter: 00,50 | Length: 06,00 | Outside Diameter: 03,00
Positioning bushDIN 179 / ISO 4247 Form Acylindrical, hardened Material: Special steelhardened and groundHardness: HRc 63±1 Form A: with one radius without grooves Form B: with two radiuses without grooves you will find as an extra article Drill bushing DIN 179 B | SM 1000 B RoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7. For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life. Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A. on request Form CA: with one radius, additionally with grooves for gluingForm CB: with two radiuses, additionally with grooves for gluingForm CVA: with one radius, additionally with grooves fand locking device Form CVB: with two radiuses, additionally with grooves fand locking device

Variants from €1.42* incl. VAT
From €13.47* incl. VAT
Details
CAD Data
Drill bushing F7, through hardened - sim. to DIN 179 | SM 1000D
Drill bushing F7, through hardened - sim. to DIN 179 | SM 1000D
Form: B | Inside Diameter: 06,20 | Length: 16,00 | Outside Diameter: 12,00
Positioning bushingsim. to DIN 179 / ISO 4247 cylindrical, through hardened Material: Tool steelhardened and groundHardness:  through hardened to HRc 63±1Form A: with one radius Form B: with two radiusesRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.

Variants from €5.68* incl. VAT
From €7.81* incl. VAT
Details
CAD Data
Drill bushing F7, stainless steel - sim. to DIN 179 | SM 1000N
Drill bushing F7, stainless steel - sim. to DIN 179 | SM 1000N
Form: B | Inside Diameter: 02,25 | Length: 06,00 | Outside Diameter: 05,00
Positioning bushing sim. to DIN 179 / ISO 4247 cylindrical, made of stainless steelMaterial: Stainless steel 1.4112hardened and groundHardness: HRc 56±1Form A: with one radius Form B: with two radiusesRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.

Price on request
Details
CAD Data
Knurled drill bushing - sim. to DIN 179 | SM 1000-1
Knurled drill bushing - sim. to DIN 179 | SM 1000-1
Form: B | Inside Diameter: 01,10 | Length: 06,00 | Outside Diameter: 04,00
similar to SM 1000 - DIN 179 Material: Special steelhardened and groundHardness: HRc 63±1Form A: with one radiusForm B: with two radiuses RoHS-compliant: yesWith cording and adhesive grooves for a secure hold in the bonding point.

Price on request
Details
CAD Data
Equalising bush H7 | SM 1000-03
Equalising bush H7 | SM 1000-03
Diameter 1: 10,00 | Diameter 2: 18,00 | Length: 12,00
Material:Aluminiumyellow chromated RoHS-compliant: yesThis bushing enables gluing of smaller standard parts into already existing, larger boreholes.Other dimensions and forms see SM 1273-6.

Price on request
Details
CAD Data
Renewable drill bushing - DIN 173 A | SM 1002-1
Renewable drill bushing - DIN 173 A | SM 1002-1
Diameter 1: 001,40 | Form: A
Quick-change bushingDIN 173 A Sheet 1Material: special steelhardened and groundhardness: HRc 63±1Basic bushings for this: Drill bushings SM 1000, 1000-1, 1000-2 and 1001.collar screws: SM 1003-1dowel pins: SM 1003-3 / SM 1022RoHS-compliant: yesPlug-in drill bushings according to DIN 173 A are precisely manufactured guide elementsthat are mainly used for drilling holes with the aid of drilling devices, as they enable quick changes between different drill diameters.  Quick-change bushings serve to guide the drill precisely, enable exact, repeatable drilling and stabilise the drill when it enters the workpiece. The bushings are usually inserted into fixtures or components via SM 1000 / SM 1001 base bushings (DIN 179/172) and secured against rotation with an inserted SM 1003-3 cylindrical pin, which strikes against an SM 1003-1 collar screw. The main use of SM 1002-1 insert drill bushings is for pre-drilling parts for further reaming or thread cutting operations.

Price on request
Details
Guide bushing, conical | SM 1273-54
Guide bushing, conical | SM 1273-54
Diameter 1: 10,00 | Length 1: 12,00 | Material: Stahl/steel
without collarwith conical borefor indexing plungers SM 1273-51 Material:ST: special steelhardened  (HRC 62 ±2) and groundNI: stainless steelhardened and ground These guide bushings with conical bore will be used for the latch bore of indexing plungers SM 1273-51. RoHS-compliant: yes

Variants from €7.02* incl. VAT
€8.43* incl. VAT
Details

Accessory Items

SUPERCRAFT Soft-face hammer | SM 3377A
SUPERCRAFT Soft-face hammer | SM 3377A
Form: A | Head diameter: 30,00
SUPERCRAFT Soft-face hammer with vibration-reducing Tubular head: fi lled with steel shotHandle: steel tube and ergonomic rubber gripImpact inserts: Nylon, white Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers. Application Areas:Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working

Variants from €38.23* incl. VAT
€40.85* incl. VAT
Details
SUPERCRAFT Soft-face hammer | SM 3366A
SUPERCRAFT Soft-face hammer | SM 3366A
Form: A | Head diameter: 80,00
SUPERCRAFT Soft-face hammer with vibration-reducing Tubular head: filled with steel shotHandle: HickoryImpact inserts: Nylon, white Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Robust powder coating | Inserts made of special nylon with maximum strength | Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceableThe tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers. Application Areas:Hall construction, steel construction, exhibition Positioning and joining of workpieces in the vice, sheet-metal working, assembly f sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Driving steel wedges, Maintenance / Repair / Overhaul

Variants from €34.36* incl. VAT
€184.68* incl. VAT
Details
This website uses cookies to ensure the best experience possible. More information...