Go to homepage
About us
★ Jobs

Drill bushing F7, stainless steel - sim. to DIN 172 | SM 1001N

from €6.52*

Quantity Unit price
To 249
€11.19*
To 9
€11.19*
To 49
€11.19*
To 99
€8.22*
From 100
€6.77*

Prices incl. VAT plus shipping costs

Delivery time: 1-3 days working days

Delivery time: See variant in the table
This product is available in 1791 versions.
Show all variants
Form
Inside Diameter
Length
Outside Diameter
Product number: 74531

Description Datasheet CAD data
Filter
Product information "Drill bushing F7, stainless steel - sim. to DIN 172 | SM 1001N "

Positioning bush with collar
stainless steel
similar to DIN 172 / ISO 4247:1977

Material: Stainless steel 1.4112
hardened and ground
Hardness: HRc 56±1

Form A: with one radius without grooves
Form B: with two radiuses without grooves

RoHS-compliant: yes

Locating hole in the workpiece to ISO tolerance H6 or H7.

Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.

Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.

DIN / ISO: DIN 172 and similar, ISO 4247
Material: Stainless steel
Surface: grinded
Type: Drill bushings with collar
CAD data

Accessory Items

SUPERCRAFT Soft-face hammer | SM 3366A
SUPERCRAFT Soft-face hammer | SM 3366A
SUPERCRAFT Soft-face hammer with vibration-reducing Tubular head: filled with steel shotHandle: HickoryImpact inserts: Nylon, white Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Robust powder coating | Inserts made of special nylon with maximum strength | Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceableThe tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers. Application Areas:Hall construction, steel construction, exhibition Positioning and joining of workpieces in the vice, sheet-metal working, assembly f sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Driving steel wedges, Maintenance / Repair / Overhaul

From €34.36* incl. VAT
Details
SUPERCRAFT Soft-face hammer | SM 3377A
SUPERCRAFT Soft-face hammer | SM 3377A
SUPERCRAFT Soft-face hammer with vibration-reducing Tubular head: fi lled with steel shotHandle: steel tube and ergonomic rubber gripImpact inserts: Nylon, white Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers. Application Areas:Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working

From €38.23* incl. VAT
Details

Similar Items

CAD Data
Drill bushing - DIN 172 A | SM 1001 A
Drill bushing - DIN 172 A | SM 1001 A
Form: A | Inside Diameter: 00,90 | Length: 06,00 | Outside Diameter: 03,00
Positioning bush  DIN 172 / ISO 4247 Form Awith collar, hardenedMaterial: Special steelhardened and ground Hardness: HRc 63±1Form A: with one radius without grooves Form B: with two radiuses without grooves you will find as an extra article Drill bushing - DIN 172 B | SM 1001 BRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.For other dimension combinations, see SM 1002. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.on requestForm CA: with one radius, additionally with grooves for gluingForm CB: with two radiuses, additionally with grooves for gluing Form CVA: with one radius, additionally with grooves fand locking deviceForm CVB: with two radiuses, additionally with grooves fand locking device

Variants from €2.76* incl. VAT
€13.83* incl. VAT
Details
CAD Data
Drill bushing - DIN 172 B | SM 1001 B
Drill bushing - DIN 172 B | SM 1001 B
Form: B | Inside Diameter: 01,00 | Length: 06,00 | Outside Diameter: 03,00
Positioning bush  DIN 172 / ISO 4247 Form B with collar, hardened Material: Special steel hardened and ground  Hardness: HRc 63±1 Form B: with two radiuses without grooves Form A: with one radius without grooves  you will find as an extra article Drill bushing - DIN 172 A | SM 1001 A RoHS-compliant: yes Locating hole in the workpiece to ISO tolerance H6 or H7. For other dimension combinations, see SM 1002.  Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.  Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life. on requestForm CA: with one radius, additionally with grooves for gluing Form CB: with two radiuses, additionally with grooves for gluing  Form CVA: with one radius, additionally with grooves fand locking device Form CVB: with two radiuses, additionally with grooves fand locking device

Variants from €3.03* incl. VAT
€14.10* incl. VAT
Details
CAD Data
Drill bushing F7, carbide - sim. to DIN 172 | SM 1001-02
Drill bushing F7, carbide - sim. to DIN 172 | SM 1001-02
Drill bushing F7 with collar carbidesim. to DIN 172 / ISO 4247 Material: CarbideSurface: groundHardness: about 90 HRA Form A: with one radius Form B: with two radiuses RoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.

Variants from €67.20* incl. VAT
€100.31* incl. VAT
Details
Guide bushing, conical | SM 1273-55
Guide bushing, conical | SM 1273-55
with collar with conical bore for indexing plungers SM 1273-51 Material:ST: special steelhardened (HRC 62 ±2) and groundNI: stainless steelhardened and ground The positioning bushings SM 1273-54 and SM 1273-55 with conical bore are used forthe detent bore of indexing plungers SM 1273-51 and allow precise positioning.The length l7 of the indexing pin is determined by the depth of penetration of the indexingpin into the cone of the bushing. The length l8 must ensure complete disengagement of the indexing pin. When engaged, the pin must have at least 0.5 mm residual stroke so that the conical part of the pin is seated in the cone of the positioning bush without play.To accommodate the positioning bushings (outer Ø with tolerance n6), the locating holes hould have tolerance H7. RoHS-compliant: yes

From €12.71* incl. VAT
Details
This website uses cookies to ensure the best experience possible. More information...