Ejector pin - DIN 1530 AH, WS | SM 1011

SCHOLZ MECHANIK GmbH

Diameter 1	Length 1	Product number	Unit price	Buy

Product information "Ejector pin - DIN 1530 AH, WS | SM 1011"

hardened
with parallel head
DIN 1530 Teil 1, Form AH / sim. DIN ISO 6751

Material:
WS: tungsten vanadium alloyed tool steel

Cylindrical countersunk head hot upset,
shaft hardened and annealed.
Dia d1 is precision-ground ISO tolerance g6

Hardeness:
shaft: HRc 60 +4 / -2
head: HRc 45 +10 / -5

RoHS-compliant: yes

Ejector pins DIN 1530 AH | SM 1011 with zylindrical head are specialised components in toolmaking,
used primarily in the plastics and die-casting industries.
They are used in die casting and injection moulding tools,
in mould making and in other industries, to eject moulded parts from the mould.
Particularly suitable for pressing and injection moulds.

DIN / ISO:	DIN 1530 and similar, DIN 1530 part 1, AH and similar, DIN ISO 6751 and similar
Element type:	Ejector pins
Material:	Cold work steel, Steel - hardened
Speciality:	Cylinder head, Head upset, precision ground
Surface:	grinded

Similar Items

Ejector pin - DIN 1530 AH, HSS | SM 1011-2

hardenedwith parallel headDIN 1530 Teil 1, Form AH / sim. DIN ISO 6751 Material: HSSCylindrical countersunk head hot upset, shaft hardened and annealed. Dia d1 is precision-ground ISO tolerance g6.Hardeness: shaft: HRc 62 ±2 head: HRc HRc 50 ±5 RoHS-compliant: yesEjector pins DIN 1530 AH | SM 1011-2 with zylindrical head are specialised components in toolmaking, used primarily in the plastics and die-casting industries. They are used in die casting and injection moulding tools, in mould making and in other industries, to eject moulded parts from the mould. Particularly suitable for pressing and injection moulds, for abrasive plastics, small dimensions, PVD-coating / nitriding.

From €8.44* incl. VAT

Details

Blade ejector pin - DIN 1530 FA | SM 1013-1

nitrided and oxidized with cylindrical headDIN ISO 8693 / DIN 1530 Teil 4, Form FA Material: Nitridable hot working steel like 1,2343 or 1,2344.Retention of hardness min. 600 °C.Cylindrical head hot upset, shank Dia d3 is precision-ground. bath-nitridedHardness:shaft: min. 950 HV 0,3 like DIN 50190 T 3 ca. 100 ∝m.Tensile core strength min. 1300 N/mm2head: HRc 45 +10 / -5RoHS-compliant: yesNitrided flat ejector pins SM 1013-1 to DIN 1530 FA are essential components in injection moulds or mould making, for example.Nitriding creates a hard surface layer that makes the parts more wear-resistantimproves corrosion resistance and thus extends the service life.These pins enable the precise removal of plastic parts from the mould. Particularly suitable for die-casting moulds.

From €36.93* incl. VAT

Details

Ejector pin - DIN 1530 D | SM 1013

hardenedwith countersunk headDIN 1530 Teil 3, Form D Material:WS: tungsten vanadium alloyed tool steel like, 1.2210, 1.2067, 1.2316Countersunk head hot upset,shaft through hardened and annealed.Dia d1 is precision-ground ISO tolerance g6.Hardness:shaft: HRc 60 +4 / -2head: HRc 45 ± 5RoHS-compliant: yesHardened ejector pins SM 1013 to DIN 1530 D are specialised components in mould and tool makingthat are primarily used in the plastics and die casting industries.They are used in die casting and injection moulding tools to eject moulded parts from the mould.Particularly suitable for pressing and injection moulds.

From €4.47* incl. VAT

Details

Ejector pin - DIN 1530 AH, stainless steel | SM 1011-1

with parallel headstainless and acid-resistant DIN 1530 part 1, Form AH / sim. to DIN ISO 6751 Material: stainless steel 1.4112, acid-resistantHardness:shaft: HRc 56 +2head: HRc 45 ±5 RoHS-compliant: yesEjector pins DIN 1530 AH | SM 1011-1 made of stainless steel are specialised components in toolmaking, which are mainly used in the plastics and die-casting industries.They are used in die-casting and injection moulding tools, in mould making and in other industries to eject moulded parts from the moulds. Particularly suitable for press and injection moulding tools and for applications with special hygiene requirements.

From €17.98* incl. VAT

Details

Ejector pin - DIN 1530 C | SM 1012

nitrided and oxidizedwith cylindrical headDIN 1530 Teil 2, Form C / sim. DIN ISO 8694 Material: Hot working tool steelCylindrical head hot upset, shaft bath-nitrided, head hot-upset. Dia d1 is precision-ground ISO tolerance g6Hardeness: shaft: min. 950 HV 0,3, on surface. Core tensile strength approx. 1400 N/mm2; head: HRc 45 +10/-5 RoHS-compliant: yesNitrided ejector pins SM 1012 to DIN 1530 C are essential components in injection moulds or in mould making, for example. Nitriding creates a hard surface layer that makes the parts more wear-resistant, improves corrosion resistance and thus extends the service life. These pins enable the precise removal of plastic parts from the mould.Particularly suitable for die-casting moulds.

From €16.73* incl. VAT

Details

Ejector pin - DIN 1530 AH, DLC-coated | SM 1011-3

hardenedDLC-coatedDIN 1530 Teil 1, Form AH / sim. DIN ISO 6751 Material: WS: through hardened tool steelCylindrical countersunk head hot upset, shaft hardened and annealed. Dia d1 is precision-ground ISO tolerance g6 Hardness: shaft: HRc 60 +4 / -2 head: HRc 45 +10 / -5 DLC-coating:Coating hardness: approx. 2,500 HVCoating thickness: approx. 1.5 μm Note: This amorphous carbon layer has a very high inherent hardness and an extremely low coefficient of friction. Due to optimal dry-running properties, lubrication of the ejector pins can be dispensed with. The end products are without discolouration and the ejector pins have a longer service life. RoHS-compliant: yesEjector pins with DLC-coating DIN 1530 AH | SM 1011-3 with zylindrical head are specialised components in toolmaking, used primarily in the plastics and die-casting industries. They are used in die casting and injection moulding tools, in mould making and in other industries, to eject moulded parts from the mould. Particularly suitable for pressing and injection moulds.

From €6.88* incl. VAT

Details

Blade ejector pin - DIN 1530 FAH | SM 1013-2

hardened with cylindrical headDIN ISO 8693 / DIN 1530 Teil 4, Form FAHMaterial: WS: Tungsten vanadium alloyed tool steel.Retention of hardness min. 200° C.Cylindrical head hot upset,shank hardened and annealed,Dia d3 is precision-ground.Hardness:shaft: HRc 60 + 4 / - 2head: HRc 45 + 10 / - 5RoHS-compliant: yesHardened flat ejector pins SM 1013-2 to DIN 1530 FAH are specialised componentsin mould and tool making that are primarily used in the plastics and die casting industries.They are used in die casting and injection moulding tools to eject moulded parts from the mould. Particularly suitable for pressing and injection moulds.

From €28.99* incl. VAT

Details

Ejector pin - DIN 1530 A | SM 1010

with cylindrical headnitridedDIN 1530 part 1, form A / similar to DIN ISO 6751 Material: Nitridable hot working steel like 1.2343 or 1.2344. Retention of hardness min. 600 °C. Head hot-upset. Dia d1 is precision-ground ISO tolerance g6. nitrided S: bath-nitrided (black surfade)B: gas or plasma nitrided, surface blank shaft: min. 950 HV 0,3 on surface. Effective nitrided case depth like DIN 50190 T 3 ca. 100 ∝m.Tensile core strength min. 1300 N/mm2.head: HRc 45 +10 / -5The hardness test on the surface should be made because of the thin nitrided layer with a max. test load of 3N (Vickers). RoHS-compliant: yesEjector pins in accordance with DIN 1530 A | SM 1010 are used as tools in plastics and metal processing. They are used in die casting and injection moulded tools, in mould making and in other industries to eject moulded parts and other products from the mould or collet. Can also be used to remove residue. Made of hardened steel, they are characterised by high precision and wear resistance.

From €7.51* incl. VAT

Details

Ejector pin DIN 1530, CH | SM 1012-1

hardenedwith cylindrical headDIN 1530 Teil 2, Form CH / ähnlich DIN ISO 8694 Material: WS: tungsten vanadium alloyed tool steel like 1.2210 or 1.2067Hardened and annealed, head hotupset. Dia d1 is precision-ground ISO tolerance g6.Hardness:shaft: HRc 60 +4 / -2head: HRc 45 +10 / -5 RoHS-compliant: yesHardened ejector pins SM 1012-1 to DIN 1530 CH are specialised toolmaking components that are primarily used in the plastics and die casting industries. They are used in die casting and injection moulding tools, in mould making and in other industries to eject moulded parts from the mould. Particularly suitable for pressing and injection moulds.

From €13.82* incl. VAT

Details