Base Plate Connector Clamp

Variants table
Colour / Surface	Diameter 1	Material	Product number	Unit price	Buy

Product information "Foot clamp connector | SM 1708"

with grub screw
for construction tubes SM 1780

Material:
AL: Aluminum
BL = plain finish, matte shot-blasted
powder coated, textured finish
SW = black, RAL 9005

Grub screw DIN 913: Stainless steel 1.4301 / AISI 304

The clamping bore of the SM 1708-01 foot clamp connector is unmachined
and designed for SM 1780 or DIN 2391, DIN 2395 and DIN 2462 construction tubes.
A DIN 913 grub screw reduces the bore cross-section for clamping at the screw point z.

RoHS compliant: yes

Compliance:	RoHS compliant
Material:	Aluminium
Surface:	blank, matt gestrahlt, kunststoffbeschichtet schwarz
Type of use:	Clamp connector

Similar Items

Foot clamp connector | SM 1707-1

Colour / Surface: Matt/matte | Diameter 1: 20 | Material: Edelstahl/stainless_steel

Base plate connector clampwith two mounting holesfor construction tubes SM 1780Material:NI: Stainless steel 1.4308 / AISI CF-8matte shot-blastedAL: Aluminum BL = plain finish, matte shot-blastedpowder coated, textured finishSW = black, RAL 9005Hexagon nut DIN 985: stainless steel A2 / AISI 304self-locking with polyamide ringSocket cap screw DIN 912 / ISO 4762: stainless steel A2 / AISI 304The clamping bore of the SM 1707-1 foot clamp connector is machinedand designed for SM 1780 or DIN 2391, DIN 2395 and DIN 2462 construction tubes. Base plate connector clamps SM 1707-1 are also suitable for mounting on profile systems.At the screw point z, the cheese head screw reduces the bore cross-section for clamping.RoHS compliant: yes

Variants from €16.54* incl. VAT

€41.47* incl. VAT

Details

Foot clamp connector | SM 1707-2

Colour / Surface: Schwarz/black | Diameter 1: 18 | Material: Aluminium

Base plate connector clampwith four mounting holesfor construction tubes SM 1780Material:NI: Stainless steel 1.4308 / AISI CF-8matte shot-blastedAL: AluminumBL = plain finish, matte shot-blastedpowder coated, textured finishSW = black, RAL 9005The clamping bore of the SM 1707-2 foot clamp connector is machined and designed for SM 1780 or DIN 2391, DIN 2395 and DIN 2462 construction tubes. At the screw point z, the cheese head screw reduces the bore cross-section for clamping.RoHS compliant: yes

Variants from €16.70* incl. VAT

€18.17* incl. VAT

Details

Foot clamp connector | SM 1710

Clamping length k: 85 | Diameter 1: 50 | Form: A | Material: Edelstahl/stainless_steel

Base plate connector clampfor construction tubesMaterial: NI: Stainless steel 1.4308 / AISI CF-8matte shot-blastedcarriage bolts DIN 603: stainless steel A2cap nut DIN 917: stainless steel A2washer: stainless steel A2sealing disk: Plastic (Polyacetal POM), bluespacer ring: Silicone, 40...60 Shore A, blueForm A: without sealForm B: with silicone sealThe clamping holes of the base clamp connectors SM 1710 are mechanically machined and designed for construction tubes SM 1780 or DIN 2391, DIN 2395 and DIN 2462. The carriage bolt and cap nut reduce the cross-section of the hole for clamping at the screw point z. Form B has seals at the screw points. If clamping is to be carried out without tools, the cap nut can be replaced by an adjustable clamping lever SM 1721 (for stainless steel cross clamp connectors) specified in the table as an accessory.RoHS compliant: yes

Variants from €66.27* incl. VAT

€138.85* incl. VAT

Details

Foot clamp holder | SM 1751

Colour / Surface: Schwarz_elo | Diameter 1: 08

Base Plate Mounting ClampMaterialAL: Aluminumclamp holderELSW = black anodizedMT = matte finish, tumbledSocket cap screw DIN 912 stainless steel A2 / AISI 304The SM 1751 foot clamp brackets have a horizontal and vertical clamping hole, whereby the vertical clamping hole is also equipped with a square. The hole spacing m is matched to SM 1753-6 clamp bracketsSM 1754-4 foot bracket clamp brackets SM 1757 flange bolts as well as SM 1758 holding magnets. The standard version of the clamping screws are socket head cap screws with hexagon socket DIN 912. They can be replaced by SM 1759-1 clamping lever sets (for order designation, see dimensions table).RoHS compliant: yes

Variants from €15.79* incl. VAT

€17.46* incl. VAT

Details

Foot clamp holder | SM 1752

Diameter 1: 10

Base plate mounting clampfrom plasticMaterial:Plastic (Polyamide)glass fiber reinforcedtemperature resistant up to 60 °Cblack, mattSocket cap screw DIN 912: stainless steel 1.4301 / AISI 304Hexagon nuts ISO 4032: Stainless steel 1.4301 / AISI 304These SM 1752 plastic foot clamp brackets have a horizontal and vertical clamping hole,both clamping holes are also equipped with a square. The standard version of the clamping screws are hexagon socket head cap screws DIN 912.RoHS compliant: yes

€2.96* incl. VAT

Details

Foot clamp connector | SM 1708

with grub screwfor construction tubes SM 1780

with grub screw
for construction tubes SM 1780