Hand lever, adjustable | SM 1189-2

SCHOLZ MECHANIK GmbH

Variants table
Colour	Diameter 1	Length 1	Length 2	Product number	Unit price	Buy

Product information "Hand lever, adjustable | SM 1189-2"

clamping lever
with threaded stud and support washer

Material:
threaded stud and retaining screw: steel, blackened
washer: steel, case hardened, blackened
handle: zinc die casting plastic coated

colors / surfaces:
plastic coated
OR = orange textured finish RAL 2004
RS = red textured finish RAL 3000
SB = silver textured finish RAL 9006
SW = black textured finish RAL 9005

Good handling due to thickening at the end of the handle.
Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration.
By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position.
When “released”, the handle engages again automatically.
The support washer is captive, does not rotate when tightening and protects the clamping surface and protects the clamping surface from damage.
A typical application is the use of clamping levers for slotted holes.

RoHS-compliant: yes

Colour:	black, orange, red, silver
Compliance:	RoHS compliant
Material:	Bushing/Screw: Steel, Lever: Zinc die casting
Speciality:	Locking by self-locking, With support disc, With threaded stud, with internal hexagon
Surface:	Steel - burnished, plastic coated
Type of use:	Clamping lever, Lever

Ähnliche Artikel

Hand lever, adjustable - HYGIENIC DESIGN | SM 1179-2

stainless steel adjustable, with screw Material:handle: stainless steel precision casting 1.4308, polished (Ra < 0.8 μm)threaded stud: stainless steel 1.4301sealing ring / wiper: hydrogenated acrylonitrile, butadiene rubber (H-NBR) temperature resistant -25 °C to +150 °CHardness 85±5 Shore A FDA compliantblue These rustproof clamping levers with solid stainless steel handles are intended for use in hygienic areas. The sealing screw-on surface enables dead space-free fastening. The polished surface prevents dirt from adhering and makes cleaning easier. Preferably used for limited clamping ranges or when a specific clamping position is required. Lever adjustment by pulling. The handle engages automatically when released. Threaded insert detachably connected to handle by serration. RoHS-compliant: yes

From €57.50* incl. VAT

Details

Hand lever | SM 1181

adjustable with threaded stud Material: threaded stud and retaining screw:ST: steel, property class 5.8, blackenedNI: stainless steel 1.4305 serrated ring: zinc die-casting handle: plastic thermoplastic (polyamide PA) glass fiber reinforced temperature-resistant up to 130° CColor / surface:SG = black-grey, matt RAL 7021OR = orange, matt RAL 2004 Good handling of the lever due to slight curvature and reinforcement at the end of the lever. Lever adjustment by lifting the handle. The handle engages automatically when released. The threaded insert is detachably connected to the handle by a serration. RoHS-compliant: yes

From €4.20* incl. VAT

Details

Mini clamping lever | SM 1183

adjustablewith screw Material:Screw insert and retaining screw:ST: Steel, strength class 5.8, burnishedNI: Stainless steelHandle body: Die-cast zinc Colors / surfaces:RH = unpaintedCR = chrome-platedplastic-coatedOR = orange RAL 2004RS = red - textured matt RAL 3000SB = silver RAL 9006SW = black - textured matt RAL 9005SZ = black - silk matt RAL 9005CR = Chrome-plated handle bodyGood handling due to reinforcement at the end of the lever.Lever adjustment by lifting the handle.The handle engages automatically when released.Threaded insert detachably connected to handle by serration. RoHS-compliant: yes

From €4.71* incl. VAT

Details

Hand lever, adjustable | SM 1185

with releasing buttonwith threaded studMaterial:thread stud and retaining screw:ST: steel, zinc plated, blue passivatedNI: stainless steel 1.4305screw insert: embedded in black glass fiber reinforced plastichandle: plastic Technopolymer (Polyamide PA)glass fiber reinforcedtemperature resistant up to 130 °Cblack-gray, matte, similar to RAL 7021releasing button: plastik, shiny finishcolour of the button:BL = blue, RAL 5024OR = orange, RAL 2004GR = grey, RAL 7035GB = yellos, RAL 1021GN = green, RAL 6017RT = red, RAL 3000SG = black-gray, RAL 7021Good handling due to curved shape and reinforcement at the end of the lever.The clamping position can be changed by lifting the handle or pressing the release button.The handle engages automatically when released.The threaded insert is detachably connected to the handle by a serration.When the handle is disengaged, the threaded insert can also be screwed in with the help of the edge notch.RoHS-compliant: yes

From €2.46* incl. VAT

Details

Hand lever, adjustable | SM 1187

with threaded studMaterial:thread stud and retaining screw:ST: steel blackenedNI: stainless steel 1.4305handle: zinc die casting Color / surface:plastic coatedSW = black, textured finish RAL 9005OR = orange, textured finish RAL 2004By lifting the lever, the serrations are disengaged.The handle can be positioned by the serrations, and the threaded insert can be exchanged.Upon releasing the handle, the serrations are automatically reengaged.These adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. RoHS-compliant: yes

From €5.77* incl. VAT

Details

Hand lever, adjustable | SM 1188

with threaded studMaterial:Threaded stud and retaining screw:ST: steel property class 5.8, blackenedhandle: zinc die castingColors / surfaces:CR = chrome-platedRH = uncoatedplastic coatedOR = orange RAL 2004RS = red textured finish RAL 3000SB = silver RAL 9006SW = black textured finish RAL 9005SZ = black silk finish RAL 9005Good handling due to thickening at the end of the handle. Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position. When released, the handle engages again automatically. For use with a limited clamping range or with a specific fixed clamping position. Screw insert and retaining screw made of stainless steel (SM 1197). RoHS-compliant: yes

From €4.83* incl. VAT

Details

Hand lever, adjustable | SM 1189-1

clamping lever with bushing and washer Material: threaded bushing and retaining screw: steel, blackenedwasher: steel, case hardened, blackened handle: zinc die casting plastic coated Colors / surfaces:plastic coatedOR = orange textured finish RAL 2004RS = red textured finish RAL 3000SB = silver textured finish RAL 9006SW = black textured finish RAL 9005 Good handling due to thickening at the end of the handle. Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position. When “released”, the handle engages again automatically. The support washer is captive, does not rotate when tightening and protects the clamping surface and protects the clamping surface from damage. A typical application is the use of clamping levers for slotted holes. RoHS-compliant: yes

From €11.72* incl. VAT

Details

Clamping lever | SM 1190

adjustable hand lever with releasing button and with threaded stud Material:threaded stud: steel, zinc plated, blue passivatedhandle: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant up to 120° Creleasing button: plastic, black Color / surface:SW = black, matt RAL 9005 Lever adjustment by pulling or pushing. The screw insert is detachably connected to the handle by a serration. Lifting the handle releases the serration and the clamping lever can be swung into the most favorable clamping position. When “released”, the handle engages again automatically. The disengagement button enables effortless disengagement. Application with limited clamping range or for certain clamping positions or if it is not necessary to remove the lever when screwing in. RoHS-compliant: yes

From €3.27* incl. VAT

Details

Hand lever, adjustable | SM 1191

with threaded stud Material:threaded stud and retaining screw: steel, blackenedhandle: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant -30° C to 130° CColor / surface:SW = black, RAL 9005 mattOR = orange, RAL 2004 matt (Remaining stock in individual sizes, reordering no longer possible)The data sheet will be updated shortly. Lever adjustment by pulling or pushing. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be pivoted to the most favorable clamping position. When released, the handle engages again automatically. Used for limited clamping ranges or for specific clamping positions. RoHS-compliant: yes

From €5.09* incl. VAT

Details

Hand lever, adjustable | SM 1197

with threaded stud from stainless steelMaterial: threaded stud and retaining screw: stainless steel 1.4305handle: zinc die castingColours / surfaces: CR = chrome-platedRH = uncoated plastic coatedOR = orange RAL 2004 RS = red textured finish RAL 3000 SB = silver RAL 9006 SW = black textured finish RAL 9005 SZ = black silk finish RAL 9005Good handling due to thickening at the end of the handle.Lever adjustment by pulling.The threaded insert is detachably connected to the handle by a serration.By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position.When released, the handle engages again automatically.For use with a limited clamping range or with a specific fixed clamping position.Screw and retaining screw made of steel (SM 1188).RoHS-compliant: yes

From €6.91* incl. VAT

Details

Hand lever, adjustable | SM 1199

Clamping leverstainless steelMaterial:handle: stainless steel 1.4308 matt blastedthreaded stud: stainless steel 1.4305retaining screw: stainless steel 1.4305pressure spring: stainless steel 1.4310 Form IS: with internal hexalobularForm AS: with external hexagon Good handling due to thickening at the end of the handle.Lever adjustment by pulling.The threaded insert is detachably connected to the handle by a serration.By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position.When released, the handle engages again automatically.For use with a limited clamping range or with a certain fixed clamping position.Application e.g. in the food or chemical industry. RoHS-compliant: yes

From €14.90* incl. VAT

Details

Hand lever, adjustable | SM 1189-2

clamping lever with threaded stud and support washer

clamping lever
with threaded stud and support washer