Knurled bushing F7 | SM 1000-3
from €3.08*
| Quantity | Unit price |
|---|---|
| To 49 |
€4.41*
|
| To 99 |
€4.19*
|
| To 199 |
€3.75*
|
| To 499 |
€3.53*
|
| From 500 |
€3.08*
|
Delivery time: 1-3 days working days
Delivery time: 1-3 days working days
This product is available in 711 versions.
Product information "Knurled bushing F7 | SM 1000-3"
Material: Special steel
hardened and ground
Hardness: HRc 63±1
Form A: with one radius without adhesive grooves
Form B: with two radii without adhesive grooves
RoHS-compliant: yes
Particularly suitable for mounting in aluminium, plastic or wood materials by pressing in or gluing.
On request:
Form CA: with adhesive grooves and one radius
Form CB: with adhesive grooves and two radii
Suitable for 3D-printed components to achieve functional surfaces.
| Material: | Steel - hardened |
|---|---|
| Speciality: | With knurling, with adhesive grooves, without adhesive grooves |
| Type: | Drill bushings, cylindrical, Knurled bushings / cordel bushings |
CAD data
Accessories
SUPERCRAFT Soft-face hammer | SM 3377A
From
€38.23*
incl. VAT
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: fi lled with steel shotHandle: steel tube and ergonomic rubber gripImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable
The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working
SUPERCRAFT Soft-face hammer | SM 3366A
From
€34.36*
incl. VAT
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: filled with steel shotHandle: HickoryImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Robust powder coating | Inserts made of special nylon with maximum strength | Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceableThe tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Hall construction, steel construction, exhibition Positioning and joining of workpieces in the vice, sheet-metal working, assembly f sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Driving steel wedges, Maintenance / Repair / Overhaul
Similar items
CAD Data
Drill bushing F7, stainless steel - sim. to DIN 179 | SM 1000N
€4.81*
incl. VAT
Positioning bushing sim. to DIN 179 / ISO 4247 cylindrical, made of stainless steelMaterial: Stainless steel 1.4112hardened and groundHardness: HRc 56±1Form A: with one radius Form B: with two radiusesRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.
Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
Variants from €5.28*
incl. VAT
CAD Data
Drill bushing F7, through hardened - sim. to DIN 179 | SM 1000D
€5.68*
incl. VAT
Positioning bushingsim. to DIN 179 / ISO 4247 cylindrical, through hardened
Material: Tool steelhardened and groundHardness: through hardened to HRc 63±1Form A: with one radius Form B: with two radiusesRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
Variants from €6.25*
incl. VAT
CAD Data
Knurled drill bushing - sim. to DIN 179 | SM 1000-1
€2.76*
incl. VAT
similar to SM 1000 - DIN 179
Material: Special steelhardened and groundHardness: HRc 63±1Form A: with one radiusForm B: with two radiuses
RoHS-compliant: yesWith cording and adhesive grooves for a secure hold in the bonding point.
Variants from €2.83*
incl. VAT
CAD Data
Drill bushing F7, carbide - sim. to DIN 179 | SM 1000-02
Positioning bushingsim. to DIN 179 / ISO 4247cylindrical, CarbideMaterial: CarbideHardness: about 90 HRASurface: groundForm A: with one radius Form B: with two radiuses
RoHS-compliant: yesDrill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - drill bushes can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Due to their high hardness and tight tolerances, a very high repeat accuracy and long service life can be guaranteed.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
Price on request
