Manual handle | SM 1273-65
from €10.66*
€10.66*
Available in 5 days
Delivery time: See variant in the table
This product is available in 2 versions.
Product information "Manual handle | SM 1273-65 "
for positioning clamping pins
Material:
stainless steel
The manual handle enables an easy and fast operation of the positioning clamping pin.
The handle is tightened to the positioning clamping pin with the screw M4 included in the delivery.
RoHS-compliant: yes
| Compliance: | RoHS compliant |
|---|---|
| Material: | Stainless steel |
| Surface: | Stainless steel - bright |
| Type of use: | Grips, Positioning bushes / bolts, Positioning clamping bolt |
Accessories
Positioning clamping pin | SM 1273-64
From
€123.70*
incl. VAT
Material:ST: heat-treated steeltempered, blackenedNI: stainless steel 1.4542precipitation-hardened
For quick clamping, fixing, adjusting, changing and securing workpieces, plates, fixtures, etc.Tightening the clamping screw centres and clamps the positioning clamping bolt by means of four balls in the mounting bushing.The clamping screw can be operated using the removable SM 1273-65 handle or an Allen key.The positioning clamping bolt is locked when it can no longer be tightened by hand.Do not operate under load!Advantages:Vibration and oscillation damping during machining,Protection against unintentional loosening of the bolt (e.g. due to vibration),High repeat accuracy of ± 0.03 mm,Easy handling during assembly/disassembly thanks to key surfaces and knurling.Notes:Positioning clamping bolts are used in industry inside buildings.- They are not intended for different modes of operation as they are a manual tool.- The maximum load capacity (see data sheet) must not be exceeded.- Once the number of permissible load cycles (10,000) has been exceeded, the positioning clamping bolt must no longer be used.- The positioning clamping bolts must be checked for visible defects or damage before each use, e.g. deformations, breaks , cracks, damage, missing balls, corrosion, unlocking function.Damaged positioning clamping bolts must be replaced.- The positioning clamping bolts mustnot be used as protective devices or safety features,not as tensioning elements,not for continuously rotating loads,not for lifting, holding or carrying persons,not if maintenance or inspection is lacking,and never without the hexagon socket lock.- Permissible ambient temperature: -30 °C to +120 °C- Permissible humidity: max. 60 %RoHS-compliant: yes
