Mounting bracket

Variants table
Diameter 1	Form	Product number	Unit price	Buy

Product information "Mounting bracket | SM 1755"

Work gripper block
for sensors and reflectors
from plastic

Material
Plastic (Polyamide)
glass fiber reinforced
temperature-resistant up to 60 °C
black, matt
Socket cap screws DIN 912: stainless steel 1.4301 / AISI 304
Hexagon nuts ISO 4032: stainless steel 1.4301 / AISI 304

Form A: for sensor mounting
Form B: for sensor mounting
Form C: with bore for countersunk screw M6
Form D: for reflector mounting
Form E: for reflector mounting
Form F: for inserting specific drillings

The SM 1755 mounting brackets can accommodate and hold standard sensors and reflectors.
They are used in conjunction with clamp holders and can be mounted on both round tubes (rods) and square tubes (rods).
The clamping bore is additionally equipped with a square section, which prevents the square tubes from twisting in the clamping element due to the positive connection.

RoHS compliant: yes

Similar Items

Mounting bracket | SM 1760-1

Form: C

Work gripper blockfor universal clamp stands SM 1760Material:Plastic (Polyamide PA)glass fiber reinforcedblack, mattForm A: for sensor mountingForm B: or sensor mountingForm C: with bore for countersunk screw M6Form D: for reflector mountingForm E: for reflector mountingfor SM 1760-4 mounting tubes, Ø13The SM 1760-1 mounting bracket can be quickly and securely brought into the desired position on the SM 1760 universal clamp stand and positioned there. The mounting bracket is clamped to the holder tubes in the desired position using a clamping screw (hexagon socket). The toothed profile of the holder tube prevents unwanted twisting, regardless of the tightening torque of the clamping screwRoHS compliant: yes

€4.15* incl. VAT

Details

Retaining plate | SM 1756-1

Clamping length k: 16

for attachment mounting clamps SM 1753-5MaterialNI: stainless steel 1.4305 / AISI 303matt blastedRetaining plates GN 1756-1 are used as a universal mounting element, e.g. for inserting specific hole patterns. The attachment bore matches the central thread of clamp mountings SM 1753-5. With k=30, the cross-shaped elongated holes allow additional adjustability and the use of two fixing screws. Fixing screws not included in the scope of delivery.RoHS compliant: yes

€3.49* incl. VAT

Details

Sensor holder | SM 1756-2

Clamping length k: 30 | Diameter: 12

from stainless steelfor Attachment mounting clamps SM 1753-5 and SM 1754-3 Material:NI: stainless steel 1.4305 / AISI 303matte shot-blastedThe sensor holders GN 1756-2 are used to hold sensors that are fastened with two lock nuts. The mounting hole is matched to the central thread of Attachment mounting clamps SM 1753-5 and surface-mounted bracket clamp holders SM 1754-3. With k=30, the cross-shaped elongated holes allow additional adjustability and the use of two fixing screws. Fixing screws not included in the scope of delivery.RoHS compliant: yes

Variants from €3.17* incl. VAT

€4.12* incl. VAT

Details

Accessories

Construction round tube | SM 1780

Diameter 1: D12 | Length: 200 | Material: NI

for Tube clamp connectorsMaterial:AL: Aluminiumanodized, natural colorNI: stainless steel 1.4301 / AISI 304plain finish, untreatedSawed cross section blank, i.e. not surface treated.Available in standard lengths of 200, 500 and 1000 mm, depending on the diameter. 2000 mm available on request. Aluminium structural tubes with a Ø10 mm are no longer available.The tolerances specified for the outside diameter of the round construction tubes comply with the requirements for split mono-block connector clamps. Two-piece connector clamps allow obviously larger tolerances on construction tubes.RoHS compliant: yes

Variants from €6.32* incl. VAT

€7.66* incl. VAT

Details

Construction square tube | SM 1781

Length: 1000 | Material: AL | Square s1: V10

for pipe clamp connectorsMaterialAL: Aluminiumanodized, natural color NI: stainless steel 1.4301 / AISI 304plain finish,untreatedSaw cuts bright, deburred, i.e. not surface-treatedThe SM 1781 compression square tubes are available in standard lengths of 200, 500 and 1000 mm, depending on the diameter.2000 mm available on request.Can be combined with e.g. SM 1711 Pipe clamps, SM 1751 Base clamp holders, SM 1752 Base clamp holders, SM 1753... Cross and Parallel clamp holders, SM 1754-1 Swivel mounting clamps, SM 1755 Mounting bracket. RoHS compliant: yes

Variants from €5.78* incl. VAT

€12.78* incl. VAT

Details

Retaining rod / Retaining tube | SM 1782

Diameter 1: D10 | Form: LS | Length: 150

round from stainless steelfor clamp holderMaterial:NI: stainless steel 1.4301 / AISI 304groundlongitudinal scale engraved with laser precisionForm LS: with longitudinal scale (mm graduation)Form OS: without scalerod Ø 8 + 10 mmtube Ø 12 + 15 + 16 + 20 mmThe external dimensions of the SM 1782 support rods / support tubes are designed for use with clamp holders. Retaining tubes can also be used as cable grommets.RoHS compliant: yes

Variants from €5.76* incl. VAT

€25.81* incl. VAT

Details

Retaining square tube | SM 1783

Form: LS | Length: 300 | Square s1: V12

squarefrom Aluminiumfor clamp holderMaterialAL: Aluminumanodized natural colorLongitudinal scale engraved in laser precisionForm LS: with longitudinal scale (mm graduation)Form OS: without scaleThe external dimensions of the SM 1783 holder tubes are designed for use with clamp holders. Holder tubes can also be used as cable grommets.RoHS compliant: yes

Variants from €4.22* incl. VAT

€48.20* incl. VAT

Details

Mounting bracket | SM 1755

Work gripper blockfor sensors and reflectorsfrom plastic

Work gripper block
for sensors and reflectors
from plastic