Pivot bolt | SM 1242
from €1.87*
€1.87*
Available in 5 days
Delivery time: See variant in the table
This product is available in 240 versions.
Product information "Pivot bolt | SM 1242"
Ball jointed levelling feet
Material:
ST: thrust pad: plastic (POM)
black, matt
temperature resist. up to 80 °C
threaded stud: steel, blackened tensile strength 500 N/mm2
NI: thrust pad: plastic (POM)
temperature resist. up to 80 °C
threaded stud: stainless steel 1.4305
NV: thrust pad: stainless steel 1.4305
O-Ring: rubber FPM
temperature resist. up to 200 °C
threaded stud: stainless steel 1.4305
ST: thrust pad: plastic (POM)
black, matt
temperature resist. up to 80 °C
threaded stud: steel, blackened tensile strength 500 N/mm2
NI: thrust pad: plastic (POM)
temperature resist. up to 80 °C
threaded stud: stainless steel 1.4305
NV: thrust pad: stainless steel 1.4305
O-Ring: rubber FPM
temperature resist. up to 200 °C
threaded stud: stainless steel 1.4305
Ball diameter smaller than the core diameter of the thread,
so ball-side screwing in is also possible.
Stainless steel thrust piece with O-ring.
The data on the static load capacity of the plastic pressure pieces are guide values and were determined by a series of tests.
The thrust piece was loaded vertically via the grub screw.
At the measured load of 3,5 kN there was no remaining deformation visible on the thrust pad nor was there any breakage.
Stainless steel thrust piece with O-ring.
The data on the static load capacity of the plastic pressure pieces are guide values and were determined by a series of tests.
The thrust piece was loaded vertically via the grub screw.
At the measured load of 3,5 kN there was no remaining deformation visible on the thrust pad nor was there any breakage.
RoHS-compliant: yes
SM 1242 swivel joints are used for setting up and levelling appliances and devices or for pressing and clamping.
The plastic thrust piece prevents damage to sensitive surfaces, while the stainless steel version can also be used in more aggressive environments thanks to the materials used.
| Compliance: | RoHS compliant |
|---|---|
| Element type: | Joint pieces, Threaded pins, bolts |
| Material: | Bushing/Screw: Stainless Steel, Bushing/Screw: Steel, Thrust piece: plastic, Thrust piece: stainless steel |
| Speciality: | with internal hexagon |
Similar Items
Leveling pad, anti-slip | SM 1270-2 AC
From
€11.54*
incl. VAT
with ball element and rubber capMaterial:Form AC: ball bearing: heat-treated steel, tempered, blackenedpad: heat-treated steel, tempered, blackenedForm CDN:ball bearing: stainless steel 1.4305pad: Thermoplast (POM), white
Form CNI: ball bearing: stainless steel 1.4305pad: stainless steel 1.4305Form C: with rubber cap for anti slipRoHS-compliant: yesUse as adjustable foot and thrust piece.Non-parallel bearing surfaces up to max. 15° degrees can be compensated.The plastic cap on the joint plate prevents slipping.The static load capacity is limited by the permissible load capacity of the joint ball.The values in the tables assume are based on a pure compressive load perpendicular to the joint foot.Bending/ buckling loads lead to a reduction in the load capacity and must be taken into account accordingly.
Leveling pad with bolt, anti-slip | SM 1270-2 BC
From
€19.54*
incl. VAT
with bolt, ball element and rubber capas anti-slip deviceMaterial:Form BC: ball bearing with bolt: heat-treated steel, tempered, blackenedpad: heat-treated steel, tempered, blackenedForm BCDN: ball bearing with bolt: stainless steel 1.4305pad: Thermoplast (POM), whiteForm BCNI: ball bearing with bolt: stainless steel 1.4305pad: stainless steel 1.4305Form C: with rubber cap for anti slipRoHS-compliant: yesUse as adjustable foot and thrust pieceNon-parallel bearing surfaces up to max. 15° degrees can be compensated.The plastic cover on the mounting pad prevents slipping.The static load capacity is limited by the permissible load capacity of the joint ball. The values in the tables assume are based on a pure compressive load perpendicular to the joint foot. Bending/ buckling loads lead to a reduction in the load capacity and must be taken into account accordingly.
