Spacer - HYGIENIC DESIGN | SM 1265-13

SCHOLZ MECHANIK GmbH

Variants table
Diameter 1	Form	Length 1	Surface	Product number	Unit price	Buy

Product information "Spacer - HYGIENIC DESIGN | SM 1265-13 "

Spacer from stainless steel, HYGIENIC DESIGN

Material:
stainless steel 1.4404 (A4) AISI 316 L
MT: matte (Ra < 0,8 μm)

sealing rings: blue
hydrogenated acrylonitrile butadiene rubber (H-NBR)
temperature resistant -25 °C to +150 °C
FDA compliant
Hardness: 85±5 Shore A

Form A: Through-hole
Form B: Through-hole with continuous thread
Form C: Through-hole with thread on both sides

Hygienic Design
These stainless steel spacers are certified according to the guidelines of the DGUV Test and are intended for use in hygienic areas.
The sealed mounting surface enables mounting without dead spaces.
The high quality finish as well as the large corner radii prevent adherence of dirt and facilitate cleaning.

These spacers are used to fasten components that are parallel to the mounting location.
Duplicate surfaces are avoided and clearances for cleaning are created.
The internal thread can also be used as a through hole by a screw with a smaller thread.

Compliance:	RoHS compliant
For use in sensitive areas:	Hygienic Design
Material:	Knob / Handle: Stainless Steel, Stainless steel
Speciality:	With internal thread, With sealing ring, With through hole thread, with through hole
Surface:	matte
Type of use:	Spacer

Zubehör

Knob - HYGIENIC DESIGN | SM 1265-8

Knob, with threaded stud, stainless steelHYGIENIC DESIGN Material:knob: stainless steel 1.4404 (A4) AISI 316 Lsealing ring: hydrogenated acrylonitrile butadiene rubber (H-NBR) temperature resistant -25 °C to +150 °Chardness 85±5 Shore AFDA compliantblue PL: polished (Ra < 0,8 μm)MT: matte (Ra < 0,8 μm) Use in hygienic areas, sealed mounting surface enables mounting without dead spaces, high quality finish prevents adherence of dirt. RoHS-compliant: yes

From €18.09* incl. VAT

Details

Screw - HYGIENIC DESIGN | SM 1265-10

Screw, stainless steelHYGIENIC DESIGN Material:screw: stainless steel 1.4404 (A4) AISI 316 LPL: knob polished (Ra < 0,8 μm)MT: knob matte (Ra < 0,8 μm)sealing ring: bluehydrogenated acrylonitrile butadiene rubber (H-NBR)temperature resistant -25 °C to +150 °Chardness 85±5 Shore AFDA compliant certified according to EHEDG guidelines Use for use in hygienic areas, sealed mounting surface enables mounting without dead spaces. The high quality finish as well as the large corner radii prevent adherence of dirt and facilitate cleaning. RoHS-compliant: yes

From €8.19* incl. VAT

Details

Screw - HYGIENIC DESIGN | SM 1265-11

Screw, stainless steelHYGIENIC DESIGNlow profile head low-profi le head, recessed stud for loss protection Material:screw: stainless steel 1.4404 (A4) AISI 316 Lsealing ring: hydrogenated acrylonitrile butadiene rubber (H-NBR) temperature resistant -25 °C to +150 °CHardness 85±5 Shore AFDA compliantblue PL: polished (Ra < 0,8 μm)MT: matte (Ra < 0,8 μm) certified according to EHEDG guidelines.Use for use in hygienic areas, sealed mounting surface enables mounting without dead spaces, high quality finish prevents adherence of dirt. Info: Due to the thin shank d4, the screws can be "captive secured" in a simple way, e.g. in a coverage. This ensures the "captivity of the fastening element" according to the Machinery Directive 2006 / 42 / EG.For this purpose, instead of a normal through-hole or threaded hole, a thread d1 must be provided on both sides, if necessary with a corresponding clearance hole d5.Depending on the design and clamping thickness a1 ... a3 of the coverage, a choice can be made between the design variants shown. Securing can also be achieved by an additional locking washer mounted on the thin shaft d4. RoHS-compliant: yes

From €8.90* incl. VAT

Details

Screw - HYGIENIC DESIGN | SM 1265-12

Screw, low profile head, stainless steelHYGIENIC DESIGN Material:screw: stainless steel 1.4404 (A4) AISI 316 Lsealing ring: hydrogenated acrylonitrile butadiene rubber (H-NBR) temperature resistant -25 °C to +150 °Chardness 85±5 Shore AFDA compliantblue PL: polished (Ra < 0,8 μm)MT: matte (Ra < 0,8 μm) Hygienic Design:certified according to EHEDG guidelines.Use for use in hygienic areas, sealed mounting surface enables mounting without dead spaces, high quality finish prevents adherence of dirt. Longer lengths with shank. RoHS-compliant: yes

From €6.84* incl. VAT

Details

Sealing ring - HYGIENIC DESIGN | SM 1291-15

Material: H-NBR: hydrogenated acrylonitrile butadiene rubberbluetemperature resistant -25 °C to +150 °CFDA compliantHardness: 85 ±5 Shore A As unassembled, the sealing rings haver the “actual dimensions” as stated in the table.To ensure a reliable sealing, an installation space must be provided in the component as shown in the drawing. This ensures that when the sealing ring is installed, it will be subject to the necessary pressure without excess load. All contact surfaces should have a minimum surface quality of Ra 0.8 μm.On request: - Ethylene-propylene-diene rubber (EPDM) temperature-resistant -40 °C to +120 °C - Fluorine rubber (FKM) temperature-resistant -5 °C to +200 °C RoHS-compliant: yes Other items from the HYGIENIC DESIGN range SM 1179-1 Clamping lever SM 1179-2 Clamping lever with screw SM 1206-4 Star knobs SM 1206-5 Three-star grips SM 1207-2 Wing nuts / T-handles SM 1265-7/8 Knobs SM 1265-9/10 Nuts/screws SM 1265-11/12 Screws, low SM 1265-13 Spacers SM 1268-4/5 Latches SM 1269-5 Bow handles SM 1273-32/33 Locking bolt SM 1291-15 Sealing ring SM 1291-16 Wiper SM 3150 Adjustable feet SM 3151 Cover sleeves

From €1.30* incl. VAT

Details