Support bar, curved | SM 1784

SCHOLZ MECHANIK GmbH

Variants table
Diameter 1	Form	Length 1	Length 2	Product number	Unit price	Buy

Product information "Support bar, curved | SM 1784"

Retaining rod
from stainless steel
for clamp holder

Material:
NI: stainless steel 1.4301 / AISI 304
plain

Form A: bent once
Form B: double bent

The dimensions of SM 1784 stainless steel retaining rods are designed for use with clamp holders.
Compact and space-saving clamp holder assemblies can be realized efficiently and cost-effectively
with just a few components using the angled stainless steel retaining rods.

RoHS compliant: yes

Accessories

Attachment mounting clamp | SM 1753-5

Colour / Surface: Schwarz_elo | Diameter 1: 08 | Diameter 2: M05

from Aluminummaterial:AL: Aluminummounting clampELSW = black anodizedMT = matte finish, tumbled Socket cap screws ISO 4762: stainless steel A2 / AISI 304Mounting clamps SM 1753-5 are intended for mounting sensor holders SM 1756-2 and retaining plates SM 1756-1, among other things.They have a central thread and an additional hole pattern 4 x M4 from hole d1 = B15. The standard version of the clamping screw is a socket head cap screw with hexagon socket DIN 912. It can be replaced by a clamping lever set SM 1759-1 (see dimensions table for order designation).The clamping hole is additionally equipped with a square.RoHS compliant: yes

Variants from €10.91* incl. VAT

€13.95* incl. VAT

Details

Sensor holder | SM 1756-2

Clamping length k: 16 | Diameter: 08

from stainless steelfor Attachment mounting clamps SM 1753-5 and SM 1754-3 Material:NI: stainless steel 1.4305 / AISI 303matte shot-blastedThe sensor holders GN 1756-2 are used to hold sensors that are fastened with two lock nuts. The mounting hole is matched to the central thread of Attachment mounting clamps SM 1753-5 and surface-mounted bracket clamp holders SM 1754-3. With k=30, the cross-shaped elongated holes allow additional adjustability and the use of two fixing screws. Fixing screws not included in the scope of delivery.RoHS compliant: yes

€3.17* incl. VAT

Details

Clamping kit | SM 1759-1

Diameter 1: M04 | Length 1: 22 | Length 2: 14

Adjustable clamping lever setwith screwfor clamp holderMaterialHandle: Die-cast zincpowder coated, textured finishSB = silver RAL 9006Screw insert: stainless steel 1.4305 / AISI 303Retaining screw: stainless steel 1.4305 / AISI 303Distance sleeve: stainless steel 1.4305 / AISI 303Clamping lever sets SM 1759-1 replace the hexagon socket head cap screws DIN 912 in clamping holders. They are used in all clamping points when repeated clamping is required, e.g. to adjust a stop. Lubricating the threads and the contact surface of the clamping lever increases the clamping force and reduces wear.You will find a recommendation for the right clamping lever set for each clamping thread in the dimension tables for the clamping holders.RoHS compliant: yes

Variants from €6.26* incl. VAT

€6.47* incl. VAT

Details

Similar Items

Construction round tube | SM 1780

Diameter 1: D25 | Length: 500 | Material: AL

for Tube clamp connectorsMaterial:AL: Aluminiumanodized, natural colorNI: stainless steel 1.4301 / AISI 304plain finish, untreatedSawed cross section blank, i.e. not surface treated.Available in standard lengths of 200, 500 and 1000 mm, depending on the diameter. 2000 mm available on request. Aluminium structural tubes with a Ø10 mm are no longer available.The tolerances specified for the outside diameter of the round construction tubes comply with the requirements for split mono-block connector clamps. Two-piece connector clamps allow obviously larger tolerances on construction tubes.RoHS compliant: yes

Variants from €6.32* incl. VAT

€12.50* incl. VAT

Details

Construction square tube | SM 1781

Length: 2000 | Material: AL | Square s1: V30

for pipe clamp connectorsMaterialAL: Aluminiumanodized, natural color NI: stainless steel 1.4301 / AISI 304plain finish,untreatedSaw cuts bright, deburred, i.e. not surface-treatedThe SM 1781 compression square tubes are available in standard lengths of 200, 500 and 1000 mm, depending on the diameter.2000 mm available on request.Can be combined with e.g. SM 1711 Pipe clamps, SM 1751 Base clamp holders, SM 1752 Base clamp holders, SM 1753... Cross and Parallel clamp holders, SM 1754-1 Swivel mounting clamps, SM 1755 Mounting bracket. RoHS compliant: yes

Price on request

Details

Retaining rod / Retaining tube | SM 1782

Diameter 1: D10 | Form: OS | Length: 200

round from stainless steelfor clamp holderMaterial:NI: stainless steel 1.4301 / AISI 304groundlongitudinal scale engraved with laser precisionForm LS: with longitudinal scale (mm graduation)Form OS: without scalerod Ø 8 + 10 mmtube Ø 12 + 15 + 16 + 20 mmThe external dimensions of the SM 1782 support rods / support tubes are designed for use with clamp holders. Retaining tubes can also be used as cable grommets.RoHS compliant: yes

Variants from €5.76* incl. VAT

€8.66* incl. VAT

Details

Retaining square tube | SM 1783

Form: OS | Length: 400 | Square s1: V10

squarefrom Aluminiumfor clamp holderMaterialAL: Aluminumanodized natural colorLongitudinal scale engraved in laser precisionForm LS: with longitudinal scale (mm graduation)Form OS: without scaleThe external dimensions of the SM 1783 holder tubes are designed for use with clamp holders. Holder tubes can also be used as cable grommets.RoHS compliant: yes

Variants from €4.22* incl. VAT

€14.10* incl. VAT

Details

Support bar, curved | SM 1784

Retaining rod from stainless steelfor clamp holder

Retaining rod
from stainless steel
for clamp holder