Threaded bushing | SM 1291-50

SCHOLZ MECHANIK GmbH

Variants table
Diameter 1	Length	Material	Product number	Unit price	Buy

Product information "Threaded bushing | SM 1291-50"

Self tapping
with slot

Material:
SGV: steel hardened, zinc yellow plated
(SM 1291-50M06X08SGV and SM 1291-50M14X24SGV possibly remaining stock)
NI: stainless steel 1.4305

internal thread d1
like ISO 6H external thread d2
metric, tolerances from manufacturer.

useful for materials like:
- aluminium and aluminium alloys
- magnesium alloys
- plastic (without plastic under 100 Shore A)

Inserts with internal and external threads
- self-cutting connecting element for the production of heavy-load,
wear and vibration-resistant screw connections in materials with low shearing strength,
- with very high pull strength at swarf free assembling.
Pour plus d'informations, voir la fiche technique SM 1291-50, page 308 du catalogue.

Element type:	Threaded inserts
Material:	Stainless steel, Steel
Speciality:	With slot, self-tapping
Surface:	Steel - yellow galvanized

Zubehör

Assembly tool | SM 1291-90

for self tapping threaded bushings Material: steel, blackened use for SM 1291-50 and SM1291-60Type E: with hexagonal shank and turnable hex bushing use for SM 1291-70 and SM1291-80Type B: with heavy-duty bearing design for screwing in threaded inserts via the internal thread.- with three clamping surfaces (M03, M04, M05, M06, M08)- with hexagon and groove (M10 and larger) Tool size corresponds to the internal thread of the socket.Use exclusively for the threaded inserts specified here. Assembly with Machine Assembly Tools• Preliminary work corresponding to that of manual assembly.• Alignment of the assembly tool to bore. - Screw on the insert.• Carefully screw in by means of forward feed a few threads.• Continue the screw-in process without any forward feed until the position of the end face of the insert is just under the surface of the workpiece.• Back off the screw.• The end face of the screwed end of the tool separates from the insert, which remains in the desired position in the workpiece.

From €104.52* incl. VAT

Details

Tommy screw - DIN 6304 | SM 1235

with fixed bar with and without thrust pad Material:steel, property class 5.8, blackenedthrust point hardenedpin pressed in -: without thrust pad Typ D: complete with thrust pad DIN 6311 The thrust pin of the SM 1235 tommy screws can be used directly or in conjunction with the thrust piece for clamping. The snap ring enables a quick and easy connection between the screw and thrust piece.RoHS-compliant: yes

From €9.14* incl. VAT

Details

Ähnliche Artikel

Threaded bushing | SM 1291-71

Self-tappingwith three cutting blind holes for particularly hard materials Material: SBV: steel hardened, blue zinc platedNI: stainless steel 1.4305 Inserts with internal and external threads- self-cutting connecting element for the production of heavy-load, wear and vibration-resistant screw connections in materials with low shearing strength- with very high pull strength at swarf free assembling- particularly suitable for extrem hard materials like metal, plastic, acrylic composites.

From €0.98* incl. VAT

Details

Threaded insert, coarse thread | SM 1291-81

sim. DIN 7965Self-tapping with coarse thread Material:SV: steel, zinc platedMS: brassN1: stainless steel 1.4104N2: stainless steel 1.4305Remaining stocks of SM 1291-81M08X13X18SV, SM 1291-81M08X13X25SV, SM 1291-81M08X16X14SV, SM 1291-81M08X16X16SV. Inserts with internal and external threads and slot- self-cutting connecting element for the production of screw connections- for materials like wood and plastic, suitable for easy automatic screwing Recommendations (benchmarks)* Predrill guidelines, depending on substrate** minimum hole depth: sleeve length plus 1 to 3 mmFurther information can be found on data sheet SM 1291-50, catalog page 308.

From €0.20* incl. VAT

Details

Threaded insert, coarse thread | SM 1291-83

Self-tapping with hexagon socket Material: SV: steel, zink plated (partly remaining stock)MS: brassNI: stainless steel, 1.4305Only remaining stocks of SM 1291-83M04X08X08SV, SM 1291-83M06X12X12SV, SM 1291-83M06X12X15SV, SM 1291-83M08X14X15SV,SM 1291-83M08X14X18SV, SM 1291-83M08X16X23ST, SM 1291-83M08X16X23SV, SM 1291-83M10X19X25SV. Inserts with external threads and hexagon socket and sealing collar:- self-cutting connecting element for the production of screw connections in materials with low shearing strength,- particularly suitable for materials like wood and plastic for example for the invisible connection of furniture parts- unthreaded lead supports easy mounting. Recommendations (benchmarks)* Pre-drill guidelines depending on substrate** minimum hole depth: sleeve length plus 1 to 3 mm.

From €0.88* incl. VAT

Details

Threaded bushing | SM 1291-62

Self-tapping with 3 borings, 1.4305 Material: NI: stainless steel 1.4305 Internal thread d1, like ISO 6H external thread d2, metric, tolerances from manufacturer. Further information can be found on data sheet SM 1291-50, catalog page 308. Recommendations (benchmarks)* Predrill guidelines, depending on substrate** minimum hole depth: sleeve length plus 1 to 3 mm. Inserts with internal and external threads- self-cutting connecting element for the production of heavy-load, wear and vibration-resistant screw connections in materials with low shearing strength- particularly suitable for aluminium and aluminium alloys, magnesium alloys, plastic (without plastic under 100 Shore A).

From €2.02* incl. VAT

Details

Threaded bushing | SM 1291-70

Self-tapping with slotfor extremely hard materials Material:SBV: steel hardened, blue zinc platedNI: stainless steel 1.4305 Recommendations (benchmarks)* Predrill guidelines, depending on substrate** minimum hole depth: sleeve length plus 1 to 3 mm. Inserts with an external thread and internal hexagon- self-cutting connecting element for the production of heavy-load, wear and vibration-resistant screw connections in materials with low shearing strength- with very high pull strength- particularly suitable for extrem hard materials and all kind of plastic.Further information can be found on data sheet SM 1291-50, catalog page 308.

From €1.68* incl. VAT

Details

Threaded insert - sim. DIN 7965 | SM 1291-80

Self-tapping with coarse thread Material: SV: steel, zinc platedMS: brass Inserts with internal and external threads and slot- self-cutting connecting element for the production of screw connections in materials with low shearing strength- with slot and recess for receiving excess wood chips- particularly suitable for materials like wood and plastic- suitable for easy automatic screwing. Recommendations (benchmarks)* Pre-drill guidelines depending on substrate** minimum hole depth: sleeve length plus 1 to 3 mm.Further information can be found on data sheet SM 1291-50, catalog page 308.

From €0.21* incl. VAT

Details

Threaded insert, coarse thread | SM 1291-82

Self-tapping with hexagon socket Material:SV: steel, zinc platedMS: brassN2: stainless steel 1.4305N3: stainless steel 1.4571 Inserts with external threads and hexagon socket- self-cutting connecting element for the production of screw connections in materials with low shearing strength- particularly suitable for materials like wood and plastic for example for the invisible connection of furniture parts- unthreaded lead supports easy mounting. Recommendations (benchmarks)* Pre-drill guidelines depending on substrate** minimum hole depth: sleeve length plus 1 to 3 mm.Further information can be found on data sheet SM 1291-50, catalog page 308.

From €0.29* incl. VAT

Details

Threaded bushing | SM 1291-60

Self tapping with 3 borings Material: SGV: steel hardened, zinc yellow plated(SM 1291-60M04X08SGV remaining stock) internal thread d1, like ISO 6H external thread d2, metric, tolerances from manufacturer. useful for materials like:- aluminium and aluminium alloys- magnesium alloys- plastic (without plastic under 100 Shore A) Inserts with internal and external threads- self-cutting connecting element for the production of heavy-load, wear and vibration-resistant screw connections in materials with low shearing strength,- with very high pull strength at swarf free assembling. More information see on page 308.

From €0.81* incl. VAT

Details

Threaded bushing | SM 1291-63

Self-tapping with 3 borings, 1.4571 Material: NI: stainless steel 1.4571 internal thread d1, like ISO 6H external thread d2, metric, tolerances from manufacturer. Further information can be found on data sheet SM 1291-50, catalog page 308. Recommendations (benchmarks)* Predrill guidelines, depending on substrate** minimum hole depth: sleeve length plus 1 to 3 mm. Inserts with internal and external threads- self-cutting connecting element for the production of heavy-load, wear and vibration-resistant screw connections in materials with low shearing strength- particularly suitable for aluminium and aluminium alloys, magnesium alloys, plastic (without plastic under 100 Shore A).

From €3.22* incl. VAT

Details

Threaded bushing | SM 1291-50

Self tapping with slot

Self tapping
with slot