Threaded plug - DIN 908 | SM 1142-3
from €0.30*
€0.30*
Available in 5 days
Available in 5 days
This product is available in 69 versions.
Product information "Threaded plug - DIN 908 | SM 1142-3"
Material:
ST: Steel, grade 5.8
ultrasonically and tensile tested
zinc plated, nano-passivated (silver / yellowish)
Form A: without seal
Form B: with gasket in copper
Form C: with gasket in aluminum
Form B: with gasket in copper
Form C: with gasket in aluminum
RoHS-compliant: yes
For metric and inch threads.
Screw-in plug to DIN 3852-1 type A,
The gaskets in form B and C correspond
to the gaskets DIN 7603, type A (flat gaskets).
Screw-in plug to DIN 3852-1 type A,
The gaskets in form B and C correspond
to the gaskets DIN 7603, type A (flat gaskets).
Screw plugs with collar and hexagon socket made of steel
without / with seals made of aluminium or copper,
for sealing holes in components and machines.
When used, for example, as oil drain plugs in engines,
for lubrication or for sealing holes in components, they provide a reliable seal against liquids and gases.
without / with seals made of aluminium or copper,
for sealing holes in components and machines.
When used, for example, as oil drain plugs in engines,
for lubrication or for sealing holes in components, they provide a reliable seal against liquids and gases.
| Compliance: | RoHS compliant |
|---|---|
| DIN / ISO: | DIN 908 |
| Element type: | Screw plugs |
| Material: | Steel |
| Speciality: | Inch thread, Standard thread, Without seal, ultrasonic -/ crack tested, with aluminum seal, with copper gasket, with internal hexagon |
| Surface: | Steel - zinc plated |
Similar Items
Blanking plug | SM 1142-2
From
€1.77*
incl. VAT
Material:NI: stainless steelST: steel, grade 5.8, blackened
Form A: without thread coatingForm B: with thread coating (polyamide allround coating)
RoHS-compliant: yesBlanking plugs made of steel or stainless steel without / with clamping lockfor sealing holes in components.
The high frictional resistance of the PRB (polyamide all-round coating) clamping lock prevents loosening, loosening or loss,
even under vibrations and loads.
Threaded plug | SM 1142-4
From
€1.02*
incl. VAT
Material:
ST: Steel, grade 5.8
ultrasonically and tensile testedzinc plated, nano-passivated (silver / yellowish)
Form A: Seal rubber NBR (Perbunan®)temperature resistant up to 100°C on requestForm B: Seal: rubber FPM (Viton®)temperature resistant up to 180 °C
RoHS-compliant: jes
For metric and inch threads.The dimensions of the screw plugs largely correspond to DIN 908 and,with the outside diameter d2, are matched to screw-in holes for pipe fittings to DIN 3852.Unlike the DIN version, however, they have an elastic seal (rubber) which is embedded in a recess and thus cannot be lost or squeezed out during tightening.
