ATEX-Sight glass | SM 1913
From
€16.56*
incl. VAT
made of aluminiumwith safety glass
Material:housing: aluminiumfinely turned front surfacesight glass: Safety glass (ESG)temperature resistant up to -20° bis +150° C.seal: Fluororubber (FPM)circlip: stainless steel 1.4310
Suitable for use in an explosion risk environment.They comply with the guidelines 2014/34/EU. Detailed documentation is available and forms part of an order for this product. Very sturdily dimensioned, scratch-resistant viewing panel. The sealing is achieved with an O-ring on the periphery. The seal can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened. Use of a softer Elastomer which guarantees better and easier sealing.
RoHS-compliant: yes
Fixing nut | SM 1921
From
€0.90*
incl. VAT
for oil sight glasses and other hydraulic components
Material:MS: brass, brightNI: stainless steel A4, bright
For the fastening of venting and bleeding elements, screw plugs oroil sight glassesSM 1910, 1911, 1912, 1913, 1920in construction elements with low wall thickness.
The stainless steel versions can be secured inside the housing with spot welds to make installation easier.
These stainless steel nuts are suitable for applications with aggressive environmental conditions.
RoHS-compliant: yes
Oil level sight glass | SM 1910
From
€6.84*
incl. VAT
made of aluminum
Material: body: aluminiumfinely turned front surface, brightsight glass: Float glasstemperature-resistant up to 100° Cseal: synthetic rubber NBR (Perbunan)contrast screen: thermoplastic (Polysulfon)
Form A: with contrast screenForm B: without contrast screen
Very sturdily dimensioned, scratch-resistant viewing panel. Tight due to O-ring on the circumference of the pane, not on the flat side. This means that the seal is independent of the contact pressure. The seal can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened.Use of a softer Elastomer which guarantees better and easier sealing. It can be used on pressurised oil tanks and also for applications with subpressure. Tests regarding maximum pressure are available on request.
Fixing nuts for wall thicknesses less than 4 mm see SM 1921.
RoHS-compliant: yes
Oil level sight glass | SM 1911
From
€9.12*
incl. VAT
made of aluminum with safety glassMaterial:body: aluminiumfinely turned front surface, blanksight glass: Safety glass (ESG)temperature-resistant up to 180° Cseal: synthetic rubber FPM (Viton®)contrast screen: Thermoplast (Polysulfon)Identification by non-black finish of the sealing.
Form A: with contrast screenForm B: without contrast screen
Very sturdily dimensioned, scratch-resistant viewing panel. Tight due to O-ring on the circumference of the pane, not on the flat side. This means that the seal is independent of the contact pressure. The seal can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened. Use of a softer Elastomer which guarantees better and easier sealing. It can be used on pressurised oil tanks and also for applications with subpressure. Tests regarding maximum pressure are available on request.For fixing nuts for wall thicknesses of less than 4 mm, see SM 1921.RoHS-compliant: yes
Oil level sight glass | SM 1912
From
€16.18*
incl. VAT
from
stainless steelwith safety glass
Material:housing: stainless steel 1.4305sight glass: Safety glass (ESG)temperature resistant up to 180° C.seal: synthetic rubber FPM (Viton®)contrast screen (Form A): Thermoplast (Polysulfon)circlip (Form B): stainless steel 1.4310
Form A: with contrast screenForm B: without contrast screen
Very sturdily dimensioned, scratch-resistant viewing panel. The sealing is achieved with an O-ring on the periphery. The seal can therefore not be lost. In addition, this groove prevents the seal from being extruded when the sight glass is tightened. Use of a softer Elastomer which guarantees better and easier sealing. It can be used on pressurised oil tanks. Tests regarding maximum pressure are available on request. Also, these oil level sight glasses are suitable for applications with subpressure.
Fixing nuts for wall thicknesses less than 4 mm see SM 1921.
RoHS-compliant: yes
Oil level sight glass | SM 1920
From
€2.19*
incl. VAT
made of plastic
Material: crystal-clear Polyamid (PA-T)- ageing resistant,- high mechanical strength,- solvent resistant, but not suitable for alcohol,- temperature resistant up to 100° C.rubber seal: Rubber NBR (Perbunan®)contrast screen: aluminium, natural colour, anodized
Form A: with contrast screenForm B: without contrast screen
Almost unbreakable, no risk of breakage even with high tightening torques.
Significantly higher material strength than Plexiglas, for example,
therefore the oil sight glasses are relatively thin-walled and have a large inspection opening.
Can also be used for pressurized containers.
The recommended tightening torque must be observed to prevent deformation of the oil sight glass.For fastening nuts with wall thicknesses of less than 4 mm, see SM 1921.
RoHS-compliant: yes
