Wing nut | SM 1208

SCHOLZ MECHANIK GmbH

Variants table
Bushing	Colour	Diameter 1	Diameter 2	Form	Product number	Unit price	Buy

Product information "Wing nut | SM 1208"

from plastic

Material:
handle: plastic
Technopolymer (Polyamide PA)
glass fibre reinforced
temperature resistant up to 130° C
bushing:
MS: brass
NI: stainless steel 1.4305 / AISI 303

Color / surface:
Handle: black-grey similar to RAL 7021, matte finish
Cover cap:
SG = black-grey RAL 7021
OR = orange RAL 2004
GR = gray RAL 7035
GB = yellow RAL 1021
GN = green RAL 6017
RT = red RAL 3000
BL = blue RAL 5024

Form D: with threaded through bore
Form E: with threaded blind bore

Relatively high tightening torques
Good handling due to slight indentation at the sash ends
Design options thanks to different colored cover caps.

RoHS-compliant: yes

Colour:	black gray, black gray cover cap, blue cover cap, gray cover cap, green cover cap, orange cover cap, red cover cap, yellow cover cap
Compliance:	RoHS compliant
Material:	Bushing/Screw: Stainless Steel, Bushing: brass, Knob / Handle: Plastic, Plastic, Thermoplastic
Speciality:	With cap, Without cap, with threaded blind hole, with through hole
Type of use:	Grips, T-handles, Wing screws / nuts

Ähnliche Artikel

Wing nut | SM 1207

stainless steel Material:stainless steel, precision casting 1.4308 / NI AISI CF-8MT: matt, shot-blastedFor easy and tool-free clamping and fixing of tools and components. Good handling of the handle due to its ergonomic shape. RoHS-compliant: yeson request:A4: stainless steel investment casting, rustproof 1.4408 / AISI 316matte shot-blasted finish for use in particularly aggressive environments

From €6.13* incl. VAT

Details

Wing screw | SM 1207-1

stainless steel Material:stainless steel, precision casting 1.4308 / NI AISI CF-8MT: matte shot-blasted finishFor easy and tool-free clamping of tools and components. Good handling of the handle due to its ergonomic shape. RoHS-compliant: yeson request: A4: stainless steel investment casting, rustproof 1.4408 / matt blasted for use in particularly aggressive environments

From €10.83* incl. VAT

Details

Wing nut - HYGIENIC DESIGN | SM 1207-2

stainless steelMaterial:Handle: Stainless steel precision casting AISI 316 (1.4408 - A4)sealing ring: hydrogenated acrylonitrile butadiene rubber (H-NBR)temperature resistant -25 °C to +150 °CHardness 85±5 Shore AFDA compliantbluePL: polished finish (Ra < 0,8 μm)MT: matte finish (Ra < 0,8 μm)The stainless steel wing nuts comply with the DGUV test principles and are intended for use in hygienic areas. Can also be used in particularly aggressive environments. The version with surface PL is also compliant with the EHEDG guidelines. The sealing flange surface enables dead space-free fastening, while the high surface quality and large corner radii prevent dirt from adhering and make cleaning easier. For simple and tool-free clamping and fixing of tools and components. The ergonomic shape makes the handle easy to handle and high clamping forces can be achieved.Hygienic Design - The stainless steel wing nuts comply with the DGUV test principles and are intended for use in hygienic areas. Can also be used in particularly aggressive environments. The version with surface PL is also compliant with the EHEDG guidelines. The sealing flange surface enables dead space-free fastening, while the high surface quality and large corner radii prevent dirt from adhering and make cleaning easier. For simple and tool-free clamping and fixing of tools and components. The ergonomic shape makes the handle easy to handle and high clamping forces can be achieved. RoHS-compliant: yes Suitable replacement sealing rings:SM 1291-15 11X04 SM 1291-15 13X09 SM 1291-15 16X12

From €17.27* incl. VAT

Details

T-Handle - HYGIENIC DESIGN | SM 1207-3

From €17.09* incl. VAT

Details