1 From 3
No results were found for the filter!
SM 1005 Punch - guide bushes SM 1005 Punch - guide bushes
SM 1005 Punch - guide bushes DIN 9845 C Steel - hardened and ground
From €3.57 incl. VAT *
SM 10051 Punch - guide bushes SM 10051 Punch - guide bushes
Punch - guide bushes ISO 8978 Material: Special steel, hardened and ground HRc = 62 - 64
From €8.90 incl. VAT *
SM 1006 Die bushes SM 1006 Die bushes
Die bushes Material: high-speed steel, hardened and ground Form A: Without head Form B: With head
From €7.91 incl. VAT *
SM 10061 Die bushes ISO 8977 SM 10061 Die bushes ISO 8977
Die bushes ISO 8977 Material: high-speed steel, hardened and ground HRc = 62 + 2
From €16.43 incl. VAT *
SM 10062 Die bushing with starting hole SM 10062 Die bushing with starting hole
Die bushing with starting hole sim. ISO 8977 Material: HSS / HWS Surface: hardened and ground Hardness: 62+2 HRc RoHS-compliant: yes Note Form C: without head Form D: with head With continuous starter hole Form E: without head Form F:...
From €14.46 incl. VAT *
SM 10063 Head type shaped bushes SM 10063 Head type shaped bushes
Head type shaped bushes (similar to ISO 8977) HSS, hardened and ground Form A: square Form B: rectangular Form C: oblong Dimensions a and b can be chosen at random within the specified limits. The maximum size of the shaped cross-section...
SM 1007 Headless punches form B SM 1007 Headless punches form B
Headless punches form B Material: HSS heavy-duty high-speed steel (from ∅ 0,5 to ∅ 10,0) hardened, annealed, precision-ground HRc = 64 ± 2 Materials you can ask for: ASP (powder-metallurgically produced high-speed steel) HSS-nitrided...
From €4.17 incl. VAT *
SM 1007-1 Carbide round bars SM 1007-1 Carbide round bars
Carbide round bars ground to tolerance h5 Material: metal carbides K40 UF ground K40 UF Sub-micrograin with high toughness and hardness, thus highly recommendable for rotating tools for the machining of hardened parts. Recommended for...
From €5.63 incl. VAT *
SM 1008 Punches C SM 1008 Punches C
Punches DIN 9861 C Material: HS: HSS high-speed steel AS: ASP 23 (Vanadis 23) Form - : Hardened and annealed, head hot-upset. Dia d1 and d3 are precision-ground ISO tolerance h6. Shaft: HRc 64±2 Head: HRc 50±5 Length of 60, 70 and 90 mm...
From €10.57 incl. VAT *
SM 1008 Punches CA SM 1008 Punches CA
Punches DIN 9861 CA Material: HSS high-speed-steel Form N: hardened and annealed, head hotupset, dia d1 and d3 are precisionground ISO tolerance h6. Dia d1 is with permissible thickening d4 under the head (see drawing and table). Shaft:...
SM 1009 punches D SM 1009 punches D
Punches with continuous shank, head 60° DIN 9861 D / similar to ISO 6752 Material: HS: HSS high-speed steel AS: ASP23 (Vanadis 23) Shaft: HSS und ASP 23 (Vanadis 23) HRc 64±2, CPM 10V HRc 62±2 Head: CPM 10V, HSS und ASP 23 (Vanadis 23)...
From €6.58 incl. VAT *
SM 1010 Ejector pins A SM 1010 Ejector pins A
Ejector pins A DIN 1530 A / similar to DIN ISO 6751 Material: Nitridable hot working steel like 1.2343 or 1.2344. Retention of hardness min. 600 °C. Head hot-upset. Dia d1 is precision-ground ISO tolerance g6. -: bath-nitrided (black...
From €5.81 incl. VAT *
1 From 3
Viewed