Top seller
SM 1020 Zylinderstifte SM 1020 Zylinderstifte
From €0.10 incl. VAT *
SM 1007 Headless punches form B SM 1007 Headless punches form B
From €4.17 incl. VAT *
SM 1021 Straight pins SM 1021 Straight pins
From €0.93 incl. VAT *
SM 1005 Punch - guide bushes SM 1005 Punch - guide bushes
From €3.57 incl. VAT *
SM 1006 Die bushes SM 1006 Die bushes
From €7.91 incl. VAT *
SM 1009 punches D SM 1009 punches D
From €6.58 incl. VAT *
SM 1010 Ejector pins A SM 1010 Ejector pins A
From €5.81 incl. VAT *
2 From 3
No results were found for the filter!
SM 1011 Ejector pin with parallel head SM 1011 Ejector pin with parallel head
SM 1011 Ejector pin with parallel head DIN 1530 Teil 1, Form AH / sim. DIN ISO 6751 Material: WS: tungsten vanadium alloyed tool steel Surface: Cylindrical countersunk head hot upset, shaft hardened and annealed. Dia d1 is...
From €3.56 incl. VAT *
SM 1012 Ejector pin, nitrided SM 1012 Ejector pin, nitrided
SM 1012 Ejector pin, nitrided DIN 1530 Teil 2, Form C / sim. DIN ISO 8694 Material: Nitridable hot working steel like 1,2343 or 1,2344 Surface: Cylindrical head hot upset, shaft bath-nitrided, head hot-upset. Dia d1 is precision-ground...
From €12.58 incl. VAT *
SM 1012-1 Ejector pins, hardened SM 1012-1 Ejector pins, hardened
Ejector pins, hardened Material: WS: tungsten vanadium alloyed tool steel like 1.2210 or 1.2067 Hardened and annealed, head hotupset. Dia d1 is precision-ground ISO tolerance g6. shaft: HRc 60 +4 / -2 head: HRc 45 +10 / -5
SM 1013 Ejector pins, countersunk SM 1013 Ejector pins, countersunk
Ejector pins with countersunk, head 600 - hardened Material: WS: tungsten vanadium alloyed tool steel like, 1.2210, 1.2067,1.2316 shaft: HRc 60 +4 / -2 head: HRc 45 ± 5 Hardened and annealed. Dia d1 is precision-ground ISO tolerance g6.
SM 1013-1 Blade ejector pins SM 1013-1 Blade ejector pins
Blade ejector pins, nitrided Material: Nitridable hot working steel like 1,2343 or 1,2344. Retention of hardness min. 600 °C. Bath-nitrided, head hot-upset. Dia d3 is precision-ground. shaft: min. 950 HV 0,3 like DIN 50190 T 3 ca. 100...
SM 1013-2 Blade ejector, hardened SM 1013-2 Blade ejector, hardened
Blade ejector - through hardened / ejector pins Material: WS: Tungsten vanadium alloyed tool steel. Retention of hardness min. 200° C. Hardened and annealed, head hot-upset. Dia d3 is precision-ground. shaft: HRc 60 ± 2 head: HRc 45 ± 5
SM 1015 Ejector sleeve SM 1015 Ejector sleeve
Ejector sleeve - through hardened sim. DIN 16756 / DIN ISO 8405 Material: WS: tungsten vanadium alloyed tool steel Surface: Hardened and annealed, head hot-upset. Dia d3 is precision-ground. Hardness: shaft: HRc 60 ± 2 head: HRc 45 +10 /...
From €68.57 incl. VAT *
SM 1016 Punches, internal hexagon SM 1016 Punches, internal hexagon
Punches for internal hexagon forming Material: HSS: heavy-duty high-speed steel Hardened and annealed, all sides precisionground. Hexagon polished. Hardness: HRc 64 + 2 This punch with a hollow ground can be used on lathes also as a broach.
SM 1018 Clipping punch SM 1018 Clipping punch
Clipping punch with cylindrical head Material: HS: HSS heavy-duty high-speed steel Hardened and annealed, head hot-upset. Dia d1 and d3 are precision-ground. shaft: HRc 64±2 head: HRc 50±5
SM 1019 Clipping punch SM 1019 Clipping punch
Clipping punch with cylindrical head ISO 8020 A Material: HSS heavy-duty high-speed steel Hardened and annealed, head hot-upset. Dia d1 precision-ground. Shaft: HRc 64±2 Head: HRc 50±5
From €8.95 incl. VAT *
SM 1020 Zylinderstifte SM 1020 Zylinderstifte
Parallel pins / dowel pins Material: tool steel (alloyed with chrome) Hardened and annealed. Dia d precision-ground ISO tolerance m6. Champfers and rounded ends are drilled. Hardness: HRc 60±2 normal form m6
From €0.10 incl. VAT *
SM 1020-1 Locating bushes SM 1020-1 Locating bushes
Locating bushes Material: steel, hardened Locating bushes allow a precisely positioning of the workpeace and fix shear forces. Normal form edges broken 0,1x45°.
2 From 3
Viewed