Top seller
SM 1020 Zylinderstifte SM 1020 Zylinderstifte
From €0.10 incl. VAT *
SM 1007 Headless punches form B SM 1007 Headless punches form B
From €4.17 incl. VAT *
SM 1021 Straight pins SM 1021 Straight pins
From €0.93 incl. VAT *
SM 1005 Punch - guide bushes SM 1005 Punch - guide bushes
From €3.57 incl. VAT *
SM 1006 Die bushes SM 1006 Die bushes
From €7.91 incl. VAT *
SM 1009 punches D SM 1009 punches D
From €6.58 incl. VAT *
SM 1010 Ejector pins A SM 1010 Ejector pins A
From €5.81 incl. VAT *
3 From 3
No results were found for the filter!
SM 1020-2 Locating Pin SM 1020-2 Locating Pin
Locating Pin Steel, hardened Locating pins SM 1020-2 are normally used in conjunction with locating bushes SM 1002. The shaft tolerance to p6 ensures a perfect fit in a bore to H7. The chamfer l3 facilitates the fitting. Steel, hardened...
From €3.17 incl. VAT *
SM 1021 Straight pins SM 1021 Straight pins
Parallel pins / straight pins with internal thread Material: tool steel (alloyed with chrome) Hardened and annealed. Dia d1 precisionground ISO tolerance m6. Champfers and rounded ends are drilled. Hardness: HRc 60 ± 2
From €0.93 incl. VAT *
SM 1021S pin puller SM 1021S pin puller
pin puller set in a box of metal with adapter for: M03 / M04 / M05 / M06 / M08 / M10 / M12 / M16 / M18
€202.20 incl. VAT *
SM 8000 Standard Keyway Broaches SM 8000 Standard Keyway Broaches
Standard Keyway Broaches Material: HSS, you can use until a hardness of RC30/BR285 (shims included). For single shims look at SM 8006. 1 = tolerance JS9 2 = tolerance P9 3 = tolerance H9 Tolerance P9 and H9 = +15%. Standard keyway...
SM 8001 Standard bushings SM 8001 Standard bushings
Standard Bushings Metric keyway bushings enable the operator to use individual metric keyway broaches in a variety of bore sizes. Both bushings and broaches are designated by a letter which signifies the width of the keyway broach and...
SM 8002 One Pass Broaches SM 8002 One Pass Broaches
One Pass Broaches Material: HSS, you can use until a hardness of RC30/BR285 (shims included) 1 = tolerance JS9 2 = tolerance P9 3 = tolerance H9 One-pass keyway broaches are designed for smaller production runs (up to several hundred) of...
SM 8003 Production broaches SM 8003 Production broaches
Production Broaches without Bushes Material: HSS, you can use until a hardness of RC30/BR285. 1 = tolerance JS9 2 = tolerance P9 3 = tolerance H9 Shoulders and back are formground to fit bore. These 3 supporting surfaces extend the full...
SM 8004 Standard Square Broaches SM 8004 Standard Square Broaches
Standard Square Broaches Mate rial: HSS, you can use until a hardness of RC30/BR285. Standard square broaches cut accurate, square profiles. No special set-up is required. A square profile will be broached in a few seconds.
SM 8005 Keyway Broach Sets SM 8005 Keyway Broach Sets
Keyway Broach Sets in handsome varnished wood boxes Material: HSS, you can use until a hardness of RC30/BR285. 1 = tolerance JS9 2 = tolerance P9 3 = tolerance H9 Tolerance P9 and H9 = +15%. Keyway broach sets come complete with keyway...
SM 8006 Shims for Keyway Broaches SM 8006 Shims for Keyway Broaches
Shims for Standard Keyway Broaches
SM1010-1 Copper core pin A SM1010-1 Copper core pin A
Copper core pin A with cylindrical head Material: beryllium-free copper alloy Surface: n.a. Hardness: min. 180 HB RoHS-compliant: yes Note: highest thermal conductivity (approx. 6 times higher than tool steel), corrosion-resistant...
From €35.11 incl. VAT *
3 From 3
Viewed