Indexing Plunger - HYGIENIC DESIGN | SM 1273-33
- Order number: 246149
Indexing Plunger stainless steel
knob and pin Side HYGIENIC DESIGN (full hygiene)
Material:
stainless steel 1.4401 / AISI 316
plunger pin case hardened
pressure spring: stainless steel AISI 316Ti
Seals: blue
temperature resistant -25 °C to +110 °C
FDA compliant
Sealing ring: H-NBR, hardness 85±5 Shore A
Wiper: TPU, hardness A 95 ±5 Shore A
All moving parts lubricated with FDA compliant grease.
Form B: without rest position
Form C: with rest position
RoHS-compliant: yes
Hygienic Design
These indexing plungers are certified
- according to DGUV Test guidelines
- fulfil hygiene requirements on the knob and pin side (full hygiene).
Wipers between button and guide or guide and pin as well as sealing rings on guide and sealing nut keep the locking mechanism tight..
At the same time, the high surface quality (Ra < 0.8 μm) and the dead-space-free fastening prevent dirt from adhering and facilitate cleaning.
If the indexing pin should not protrude temporarily, indexing plungers with indexing lock form C are used.The knob is turned 90° after the pin has been retracted; the knob retains its position by means of a detent notch.
To ensure the function of the sealing rings, fastening or through holes on the housing must be made at right angles, burr-free and without chamfe
Material: | Body: stainless steel, Bolt: Stainless steel, Knob / Handle: Stainless Steel, Stainless steel |
Operating Element: | Bolt, Indexing plunger / indexing pin |
Use in sensitive areas: | Hygienic Design |
Surface: | polished |
RoHS: | RoHS compliant |
Special feature: | Mit zwei Schlüsselflächen, With detent lock, with knob / handle, Without detent lock, With sealing ring |