Assembly tool | SM 1275-2 MW
from €19.10*
€19.10*
Available in 5 days
Available in 5 days
This product is available in 10 versions.
Product information "Assembly tool | SM 1275-2 MW"
Assembly tool
for Spring plungers SM1275-2
for mounting via slot (pin sided)
Material: steel
Form MW
RoHS-compliant: yes
| Compliance: | RoHS compliant |
|---|---|
| Element type: | Tools, resilient thrust pieces |
| Material: | Steel |
Accessory Items
Spring plunger | SM 1275-21
From
€6.72*
incl. VAT
Spring thrust padwith internal hexagon and seal
Material: body:free cutting steel, blackenedstainless steel 1.4305bolt:free cutting steel, hardened,
blackenedstainless steel 1.4305
spring: stainless steel
sealing: NBR plastic
Form A: housing and bolt from steel, normal spring loadForm AN: housing and bolt stainless steel, normal spring loadForm AS:
housing and bolt from steel, increased spring load
tool MW: Assembly tool
Indication:standard spring load: no markingincreased spring load: marked with two lines (not applicable for production from the second quarter of 2025).
To be used for locating or for applying pressure or lifting off. By means of the seal, liquid cannot penetrate into the spring plunger. Spring plungers can be fixed and removed by means of the slot or internal hexagon. Temperature range from - 30 °C up to + 80 °C. Compared to finish of SM1275-2, i.e. „no seal“, there are deviations in dimension l, spring load and temperature range.
RoHS-compliant: yes
Spring plunger | SM 1275-2
From
€2.25*
incl. VAT
Spring thrust pad with bolt and internal hexagon
Material:spring: stainless steelbody:free cutting steel, blackenedstainless steel 1.4305bolt:free cutting steel, hardened,
blackenedstainless steel 1.4305, nitridedThermoplastic POM, white
Form A: body and pin from free cutting steel, normal spring loadForm AS:
body and pin from free cutting steel,
with increased spring load
Form AN:
body and pin from stainless steel, normal spring loadForm D: body from free cutting steel, with pin from plastic, normal spring loadForm DN:
body from stainless steel, with pin from plastic, normal spring load
Version SD: screw driver
Indication:standard spring load: no markingincreased spring load: marked with two lines (not applicable for production from the second quarter of 2025).
These sprig plungers are used for locating or for applying pressure or lifting off. Spring plungers can be fixed and removed by means of the slot or internal hexagon. Temperature range of steel and stainless steel is up to 250° C. Spring plungers with bolt made of POM are used from -30 °C up to +50 °C.
RoHS-compliant: yes
