Basic bushing H7 | SM 1002-3
from €4.62*
| Quantity | Unit price |
|---|---|
| To 4 |
€6.90*
|
| To 9 |
€6.27*
|
| To 49 |
€5.80*
|
| To 99 |
€5.02*
|
| From 100 |
€4.62*
|
Delivery time: 1-3 days working days
Delivery time: See variant in the table
This product is available in 32 versions.
Product information "Basic bushing H7 | SM 1002-3 "
DIN 173 G und H Part 2
for Renewable drill bushings DIN 173 E/ER/ES SM 1002-2
Material: special steel
hardened and ground
Hardness: HRc 63±1
Form G: with head
Form H: without head
For renewable drill bushes SM 1002-2.
Other dimensions look for SM 1274-8.
RoHS-compliant: yes
| DIN / ISO: | DIN 173 G, DIN 173 H |
|---|---|
| Material: | Steel - hardened |
| Speciality: | With collar, Without collar |
| Surface: | grinded |
| Type: | Locating bushing / Positioning bush, Shim bushes / fitting bushes / bearing bushes / spacer bushes |
CAD data
Accessories
SUPERCRAFT Soft-face hammer | SM 3377A
From
€38.23*
incl. VAT
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: fi lled with steel shotHandle: steel tube and ergonomic rubber gripImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable
The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working
SUPERCRAFT Soft-face hammer | SM 3366A
From
€34.36*
incl. VAT
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: filled with steel shotHandle: HickoryImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Robust powder coating | Inserts made of special nylon with maximum strength | Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceableThe tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Hall construction, steel construction, exhibition Positioning and joining of workpieces in the vice, sheet-metal working, assembly f sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Driving steel wedges, Maintenance / Repair / Overhaul
Similar Items
Cylindrical bushing | SM 1274-8
€13.57*
incl. VAT
Diameter:
19.0
for indexing plungers SM 1274-7
Material: steelhardened and ground
RoHS-compliant: yes
Variants from €11.78*
incl. VAT
CAD Data
Drill bushing - DIN 179 A | SM 1000 A
€5.18*
incl. VAT
Form:
A
|
Inside Diameter:
12,60
|
Length:
28,00
|
Outside Diameter:
22,00
Positioning bushDIN 179 / ISO 4247 Form Acylindrical, hardened
Material: Special steelhardened and groundHardness: HRc 63±1
Form A: with one radius without grooves Form B: with two radiuses without grooves you will find as an extra article Drill bushing DIN 179 B | SM 1000 B
RoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7. For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.
Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
on request
Form CA: with one radius, additionally with grooves for gluingForm CB: with two radiuses, additionally with grooves for gluingForm CVA: with one radius, additionally with grooves fand locking device
Form CVB: with two radiuses, additionally with grooves fand locking device
Variants from €1.42*
incl. VAT
CAD Data
Drill bushing - DIN 172 A | SM 1001 A
€18.30*
incl. VAT
Form:
A
|
Inside Diameter:
00,80
|
Length:
06,00
|
Outside Diameter:
03,00
Positioning bush DIN 172 / ISO 4247 Form Awith collar, hardenedMaterial: Special steelhardened and ground Hardness: HRc 63±1Form A: with one radius without grooves
Form B: with two radiuses without grooves
you will find as an extra article Drill bushing - DIN 172 B | SM 1001 BRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.For other dimension combinations, see SM 1002. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.on requestForm CA: with one radius, additionally with grooves for gluingForm CB: with two radiuses, additionally with grooves for gluing Form CVA: with one radius, additionally with grooves fand locking deviceForm CVB: with two radiuses, additionally with grooves fand locking device
Variants from €2.76*
incl. VAT
