Clamping bushing | SM 1003-5

DIN / ISO:	DIN 173 and similar
Material:	Steel
Surface:	Steel - burnished
Type:	Clamping bushes

Accessories

Hexagon key | SM 2310 D

Hexagon key (metric)long form, with ball end Material: Chrom-Vanadiumhardened and nickelcoated Applications at angles up to 30°. Speeds up work in hard-to-reach locations, easy but still precise entry of key into socket. Matt-chrome surface gives excellent corrosion protection. RoHS-compliant: yes

From €1.57* incl. VAT

Details

CAD Data

Plug-in drill bush - DIN 173 K | SM 1002-4 K

Form: K | Inside Diameter: 07,50 | Length: 020 | Outside Diameter: 012

Quick-change bushingDIN 173 K part 1Material: special steel Hardened and ground Hardness: HRc 63±1Form K: Quick-change socket for right-hand cutting tools, bayonet lock on the right Shape L: Interchangeable socket can be found under Plug-in drill bush DIN 173 L | SM 1002-4 Lon requestForm KL: Quick-change bush for left-hand cutting tools, bayonet lock leftDrill bushes: SM 1000; SM 1000-1; SM 1000-2; SM 1001 can be used. Suitable screws: SM 1002-5 Clamping bush: SM 1003-5 Retaining pins: SM 1003-3RoHS-compliant: yes

Variants from €20.11* incl. VAT

From €24.66* incl. VAT

Details

Plug-in drill bush - DIN 173 L | SM 1002-4 L

Form: L | Inside Diameter: 02,40 | Length: 016 | Outside Diameter: 008

Replacement bushing DIN 173 L part 1Material: special steelHardened and groundHardness: HRc 63±1 Form L: Interchangeable bushing Form K: Quick-change socket for right-hand cutting tools, bayonet lock on the right can be found atPlug-in drill bush DIN 173 K | SM 1002-4 K.Drill bushes: SM 1000; SM 1000-1; SM 1000-2; SM 1001 can be used.Suitable screws: SM 1002-5Clamping bush: SM 1003-5Retaining pins: SM 1003-3RoHS-compliant: yes

Variants from €18.36* incl. VAT

From €23.50* incl. VAT

Details

Hexagon key - DIN 911D / ISO 2936D | SM 2289

Width across flats: 03.0

Hexagon key (metric) DIN 911D / ISO 2936D Material: Chrom-Vanadiumhardened and nickelcoatedend face machinededges of end face chamfered. RoHS-compliant: yes

Variants from €0.57* incl. VAT

€0.73* incl. VAT

Details

SUPERCRAFT Soft-face hammer | SM 3366A

SUPERCRAFT Soft-face hammer with vibration-reducing Tubular head: filled with steel shotHandle: HickoryImpact inserts: Nylon, white Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Robust powder coating | Inserts made of special nylon with maximum strength | Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceableThe tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers. Application Areas:Hall construction, steel construction, exhibition Positioning and joining of workpieces in the vice, sheet-metal working, assembly f sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Driving steel wedges, Maintenance / Repair / Overhaul

From €34.36* incl. VAT

Details

SUPERCRAFT Soft-face hammer | SM 3377A

SUPERCRAFT Soft-face hammer with vibration-reducing Tubular head: fi lled with steel shotHandle: steel tube and ergonomic rubber gripImpact inserts: Nylon, white Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers. Application Areas:Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working

From €38.23* incl. VAT

Details

Clamping bushing | SM 1003-5

DIN 173 Part 1for plug-in drill bushings SM 1002-4

DIN 173 Part 1
for plug-in drill bushings SM 1002-4