Sechskantmutter mit Bund - DIN 6331

DIN / ISO:	DIN 6331
Element type:	Screws / Nuts
Material:	Quenched and tempered steel, Stainless steel

Ähnliche Artikel

Extension nut - DIN 6334 | SM 1095

(old DIN standard) Material: heat-treated steel, tempered, quality 10phosphated For function and safety both screws should match half the length of nut on either side. Minimum depth is 1x dia of thread. RoHS-compliant: yes on request:stainless steel version

From €1.92* incl. VAT

Details

Hexagon nut - ISO 4032/DIN 934 | SM 1291-12

Hexagon nut ISO 4032 / DIN 934 Material: ST: steel, grade 8, zinc plated NI: stainless steel The grade of a nut should always be equal or higher then the grade of the screws. This means for a screw with grade 8.8, use a nut with grade 8 or higher.* Widths across flats, external like DIN ISO 272.* Widths across flats, external like DIN ISO 272.

From €0.04* incl. VAT

Details

Hexagon nut - ISO 4035 / DIN 439 | SM 1291-122

Hexagon nut, low type ISO 4035 / DIN 439 Material: ST: steel, grade 04, zinc plated or blackened (only right-hand thread) NI: stainless steel RST: right-hand thread steel, zinc plated LST: left thread steel, zinc plated RNI: right-hand thread, stainless steel LNI: left thread, stainless steel ST: right-hand thread, steel, blackened The nuts are be used for eye joint links SM 1231 or fork joints with yokes SM 1230.

From €0.05* incl. VAT

Details

Hexagon nut, flat type | SM 1291-123

Hexagon nut, flat typefor Indexing plungers / Cam action indexing plungers Material:NI: stainless steel 1.4305ST: steel, blackened With their smaller dimensions, flat hexagon nuts SM 1291-123 expandthe mounting options of indexing plungers and cam action indexing plungers. RoHS-compliant: yes

From €0.45* incl. VAT

Details

Hexagon nut | SM 1120

with spherical contact surface on one sideDIN 6330 and similar Material: ST: steel, grade 10NI: stainless steel Article with selection option with "SW"correspond to the old standard. Suitable for this parts: Flat end matching hardened washers SM 1125 / DIN 6340. With spherical end matching taper face of washers SM 1130D or G / DIN 6319 D or G.Ball radius "r" suitable for tapered cups SM 1130 D / DIN 6319.To compensate for non-parallel clamping surfaces. m = 1.5 x d. RoHS-compliant: yes

From €0.71* incl. VAT

Details

Hexagon nut - DIN 985 | SM 1291-121

Self-locking hexagon nut, regular type DIN 985 Material: ST: steel, zinc plated NI: stainless steel / grade 8 The grade of a nut should always be equal or higher then the grade of the screws. This means for a screw with grade 8.8, use a nut with grade 8 or higher. * Widths across flats, external like DIN ISO 272.

From €0.12* incl. VAT

Details

Collar nut - DIN 6331 | SM 1090