Drill bushing F7, carbide - sim. to DIN 179 | SM 1000-02

from €61.09*

Quantity	Unit price
To 1	€91.19*
To 2	€85.72*
To 4	€79.33*
To 9	€72.95*
From 10	€61.09*

Prices incl. VAT plus shipping costs

Available in 70 days

Delivery time: See variant in the table

This product is available in 1718 versions.

Show all variants

Product number: 27994

Description Datasheet CAD data

Form	Inside Diameter	Length	Outside Diameter	Product number	Unit price	Buy

Product information "Drill bushing F7, carbide - sim. to DIN 179 | SM 1000-02"

Positioning bushing
sim. to DIN 179 / ISO 4247
cylindrical, Carbide

Material: Carbide
Hardness: about 90 HRA
Surface: ground

Form A: with one radius
Form B: with two radiuses

RoHS-compliant: yes

Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - drill bushes can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.

Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Due to their high hardness and tight tolerances, a very high repeat accuracy and long service life can be guaranteed.

Assembly:
the drill diameter should correspond to the bushing diameter,
press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.

DIN / ISO:	DIN 179 and similar
Material:	Carbide
Type:	Drill bushings, cylindrical, Locating bushing / Positioning bush

CAD data

Accessory Items

SUPERCRAFT Soft-face hammer | SM 3366A

SUPERCRAFT Soft-face hammer with vibration-reducing Tubular head: filled with steel shotHandle: HickoryImpact inserts: Nylon, white Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Robust powder coating | Inserts made of special nylon with maximum strength | Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceableThe tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers. Application Areas:Hall construction, steel construction, exhibition Positioning and joining of workpieces in the vice, sheet-metal working, assembly f sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Driving steel wedges, Maintenance / Repair / Overhaul

From €34.36* incl. VAT

Details

SUPERCRAFT Soft-face hammer | SM 3377A

SUPERCRAFT Soft-face hammer with vibration-reducing Tubular head: fi lled with steel shotHandle: steel tube and ergonomic rubber gripImpact inserts: Nylon, white Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers. Application Areas:Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working

From €38.23* incl. VAT

Details

Similar Items

CAD Data

Drill bushing F7, through hardened - sim. to DIN 179 | SM 1000D

Positioning bushingsim. to DIN 179 / ISO 4247 cylindrical, through hardened Material: Tool steelhardened and groundHardness: through hardened to HRc 63±1Form A: with one radius Form B: with two radiusesRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.

Variants from €5.68* incl. VAT

€37.91* incl. VAT

Details

CAD Data

Drill bushing F7, stainless steel - sim. to DIN 179 | SM 1000N

Positioning bushing sim. to DIN 179 / ISO 4247 cylindrical, made of stainless steelMaterial: Stainless steel 1.4112hardened and groundHardness: HRc 56±1Form A: with one radius Form B: with two radiusesRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.

Variants from €4.81* incl. VAT

€34.27* incl. VAT

Details

CAD Data

Knurled drill bushing - sim. to DIN 179 | SM 1000-1

similar to SM 1000 - DIN 179 Material: Special steelhardened and groundHardness: HRc 63±1Form A: with one radiusForm B: with two radiuses RoHS-compliant: yesWith cording and adhesive grooves for a secure hold in the bonding point.

Variants from €2.76* incl. VAT

€3.76* incl. VAT

Details

CAD Data

Knurled bushing F7 | SM 1000-3

Material: Special steelhardened and groundHardness: HRc 63±1Form A: with one radius without adhesive grooves Form B: with two radii without adhesive grooves RoHS-compliant: yes Particularly suitable for mounting in aluminium, plastic or wood materials by pressing in or gluing.On request: Form CA: with adhesive grooves and one radius Form CB: with adhesive grooves and two radii Suitable for 3D-printed components to achieve functional surfaces.

Variants from €2.80* incl. VAT

€4.01* incl. VAT

Details

Guide bushing, conical | SM 1273-54

without collarwith conical borefor indexing plungers SM 1273-51 Material:ST: special steelhardened (HRC 62 ±2) and groundNI: stainless steelhardened and ground These guide bushings with conical bore will be used for the latch bore of indexing plungers SM 1273-51. RoHS-compliant: yes

From €7.02* incl. VAT

Details

Drill bushing F7, carbide - sim. to DIN 179 | SM 1000-02

Positioning bushingsim. to DIN 179 / ISO 4247cylindrical, Carbide

Positioning bushing
sim. to DIN 179 / ISO 4247
cylindrical, Carbide