Go to homepage
About us
★ Jobs

Flange | SM 1793

from €12.58*

€15.53*

Prices incl. VAT plus shipping costs

Available in 5 days

Available in 5 days

This product is available in 4 versions.
Diameter
To create an offer for this item, please add it to your shopping cart. From there you can create the quote with all the necessary details.
Product number: 252992

Description Datasheet
Filter
Product information "Flange | SM 1793 "

made from stainless steel
for Swivel ball joints SM 1792

Material:
NI: stainless steel 1.4301 / AISI 304
matte finish, tumbled
Countersunk screw DIN 7991: stainless steel 1.4301 / AISI 304
Half length tapered groove pin DIN 8745: stainless steel 1.4301 / AISI 304

Flanges SM 1793 are mounted from below onto the swivel ball joints SM 1792.
A half length tapered groove pin prevents any rotation.
The flange enables the swivel ball joints to be mounted on the upper surface.
The d2 section with the three d3 drill holes is configured so that standard screws with washers can be used.
The half length tapered groove pin is mounted on the flange.
The countersunk screw is included separately.

RoHS compliant: yes

Accessories

Ball joint | SM 1792 A/B
Ball joint | SM 1792 A/B
Diameter 1: 39 | Diameter 2/3: M06 | Form: A
Swivel ball jointmade of aluminiumball with internal threadMaterial:AL: AluminumHousing: Aluminumanodized, blackBase plate, ball:  Aluminum plain finishAdjustable hand lever (Form A + C):Zinc die castingpowder coated, textured finish silver, RAL 9006Threaded stud and retaining screw: stainless steel 1.4305 / AISI 303Set screw (Form B + D): stainless steel 1.4301 / AISI 304Form A: clamping with adjustable hand leverd2/r1 for smaller threadsd3/r2 for larger threadsForm B: clamping with set screw with hexagon socketd2/r1 for smaller threadsd3/r2 for larger threadsSwivel ball joints SM 1792 allow precise and stepless adjustment of the ball pivot within the swiveling range. This is a particular advantage when adjusting scanners, cameras, lighting, monitors, etc.Thanks to the efficient clamping mechanism, only small amounts of torque on the clamping screw result in comparatively strong clamping forces on the ball. This force is easily applied with the adjustable lever (Form A + C ).The ball joint can be mounted from below with the d5 internal thread or together with the SM 1793 flange,available as an accessory, using three through-holes from above.For a permanent high stop torque, the contact surfaces of the balls must be kept free of grease. Exceeding the recommended tightening torques increases the stop torque, but may result in increased wear of the clamping mechanism.RoHS compliant: yes

Variants from €44.64* incl. VAT
€63.57* incl. VAT
Details
This website uses cookies to ensure the best experience possible. More information...