Flange clamp connector | SM 1704
from €17.65*
€18.43*
Available in 5 days
Delivery time: See variant in the table
This product is available in 18 versions.
Product information "Flange clamp connector | SM 1704 "
with 2 mounting holes
for construction tubes SM 1780
Material:
NI: Stainless steel 1.4308 / AISI CF-8
matte shot-blasted
AL: Aluminum
NI: Stainless steel 1.4308 / AISI CF-8
matte shot-blasted
AL: Aluminum
BL = plain finish, matte shot-blasted
powder coated, textured finish
SW = black, RAL 9005
Hexagon nut DIN 985: stainless steel A2 / AISI 304
powder coated, textured finish
SW = black, RAL 9005
Hexagon nut DIN 985: stainless steel A2 / AISI 304
self-locking with polyamide ring
Socket cap screw DIN 912 / ISO 4762: stainless steel A2 / AISI 304
The clamping bore of the SM 1704 flange clamp connectors is machined
Socket cap screw DIN 912 / ISO 4762: stainless steel A2 / AISI 304
The clamping bore of the SM 1704 flange clamp connectors is machined
and designed for SM 1780 or DIN 2391, DIN 2395 and DIN 2462 construction pipes.
These connectors are also suitable for mounting on profile systems.
The cheese head screw reduces the bore cross-section for clamping at the screw points z.
If clamping is to be carried out without tools, the cheese head screw can be replaced by
an adjustable SM 1720 / SM 1721 clamping lever specified in the table as an accessory.
RoHS compliant: yes
These connectors are also suitable for mounting on profile systems.
The cheese head screw reduces the bore cross-section for clamping at the screw points z.
If clamping is to be carried out without tools, the cheese head screw can be replaced by
an adjustable SM 1720 / SM 1721 clamping lever specified in the table as an accessory.
RoHS compliant: yes
| Compliance: | RoHS compliant |
|---|---|
| Material: | Aluminium, Stainless steel |
| Surface: | blank, matt gestrahlt, kunststoffbeschichtet schwarz |
| Type of use: | Clamp connector |
Similar Items
Cross clamp connector | SM 1703
€71.00*
incl. VAT
Clamping length k:
40
|
Diameter 1:
30
|
Form:
A
|
Material:
Edelstahl/stainless_steel
Two-Way connector clampfor construction tubes SM 1780Material: NI: Stainless steel 1.4308 / AISI CF-8 matte shot-blastedcarriage bolts DIN 603: stainless steeltwo cap nuts DIN 917: stainless steelwasher: A2 stainless steelseals: cealing washers, plastic (polyacetal POM)spacer ring: Silicone, 40 ... 60 ShoreForm A: without sealsForm B: with sealsThe clamping bores of the stainless steel cross clamp connectors SM 1703 are machined and designed for construction pipes SM 1780 or DIN 2391, DIN 2395 and DIN 2462. At the screw points z, the carriage bolts and cap nuts reduce the bore cross-section for clamping. Form B has seals at the screw points. If clamping is to be carried out without tools, the cap nuts can be replaced by the adjustable clamping levers SM 1721 (for stainless steel cross clamp connectors) listed in the table as accessories.
RoHS compliant: yes
Foot clamp connector | SM 1707-2
€18.09*
incl. VAT
Colour / Surface:
Blank/matt
|
Diameter 1:
10
|
Material:
Aluminium
Base plate connector clampwith four mounting holesfor construction tubes SM 1780Material:NI: Stainless steel 1.4308 / AISI CF-8matte shot-blastedAL: AluminumBL = plain finish, matte shot-blastedpowder coated, textured finishSW = black, RAL 9005The clamping bore of the SM 1707-2 foot clamp connector is machined and designed for SM 1780 or DIN 2391, DIN 2395 and DIN 2462 construction tubes. At the screw point z, the cheese head screw reduces the bore cross-section for clamping.RoHS compliant: yes
Variants from €16.70*
incl. VAT
Foot clamp connector | SM 1708
€16.77*
incl. VAT
Colour / Surface:
Schwarz/black
|
Diameter 1:
14
|
Material:
Aluminium
with grub screwfor construction tubes SM 1780Material:AL: AluminumBL = plain finish, matte shot-blastedpowder coated, textured finishSW = black, RAL 9005Grub screw DIN 913: Stainless steel 1.4301 / AISI 304The clamping bore of the SM 1708-01 foot clamp connector is unmachined and designed for SM 1780 or DIN 2391, DIN 2395 and DIN 2462 construction tubes. A DIN 913 grub screw reduces the bore cross-section for clamping at the screw point z.RoHS compliant: yes
Variants from €16.14*
incl. VAT
Foot clamp connector | SM 1710
€145.35*
incl. VAT
Clamping length k:
85
|
Diameter 1:
50
|
Form:
B
|
Material:
Edelstahl/stainless_steel
Base plate connector clampfor construction tubesMaterial: NI: Stainless steel 1.4308 / AISI CF-8matte shot-blastedcarriage bolts DIN 603: stainless steel A2cap nut DIN 917: stainless steel A2washer: stainless steel A2sealing disk:
Plastic (Polyacetal POM), bluespacer ring: Silicone, 40...60 Shore A, blueForm A: without sealForm B: with silicone sealThe clamping holes of the base clamp connectors SM 1710 are mechanically machined and designed for construction tubes SM 1780 or DIN 2391, DIN 2395 and DIN 2462. The carriage bolt and cap nut reduce the cross-section of the hole for clamping at the screw point z. Form B has seals at the screw points. If clamping is to be carried out without tools, the cap nut can be replaced by an adjustable clamping lever SM 1721 (for stainless steel cross clamp connectors) specified in the table as an accessory.RoHS compliant: yes
Variants from €66.27*
incl. VAT
Swivel mounting clamp | SM 1754-4
€25.93*
incl. VAT
Clamping length k:
25
|
Colour / Surface:
Matt/matte
|
Diameter 1:
-
Base plate swivel mounting clampfrom AluminiumMaterialAL: Aluminumclamp holderELSW = black anodizedMT = matt, smooth groundSM 1754-4 foot bracket clamps can be combined with SM 1754-1 bracket clamps, SM 1754-2 T-bracket clamps and SM 1754-3 surface-mounted bracket clamps with the same k dimensions to form articulated clamps. SM 1759-2 bracket joint sets with screw (shape S) and with adjustable clamping lever (shape K) are also available.
The hole spacing m of the SM 1754-4 foot bracket clamps is matched to the SM 1751 foot clamps, SM 1753-6 clamps, SM 1757 flange bolts and SM 1758 holding magnets.RoHS compliant: yes
Variants from €13.97*
incl. VAT
Accessories
Adjustable clamping lever | SM 1720
€11.57*
incl. VAT
Diameter 1:
M08
|
Form:
IS
|
Length 1:
063
|
Length 2:
30
Adjustable hand leverwith screwfor tube clamp connectorsMaterial:handle: Zinc die-cast powder coated, textured matt finishSB = silver, RAL 9006threaded insert: stainless steel 1.4305 / AISI 303retaining screw: stainless steel 1.4305 / AISI 303Form IS: with hexagon socketAdjustable clamping levers SM 1720 replace the hexagon socket screws DIN 912 for tube clamp connectors.You will find a recommendation for the right clamping lever for each screw position in the dimension tables for the clamp connectors.RoHS compliant: yes
Variants from €9.27*
incl. VAT
Clamping lever | SM 1721-1
€19.81*
incl. VAT
Diameter 1:
M06
|
Form:
AS
|
Length 1:
045
|
Length 2:
20
adjustable with screwfor pipe clamp connectorMaterial:handle: stainless steel investment casting 1.4308matt blastedscrew insert: stainless steel 1.4305retaining screw: stainless steel 1.4305pressure spring: stainless steel 1.4310Form AS: with external hexagonAdjustable clamping levers SM 1721-1 and SM 1721-2 replacethe hexagon socket screws DIN 912 or the cap nuts DIN 917in stainless steel tube clamp connectors. In the dimension tables for the clamp connectors,you will find a recommendation for the right clamping lever for each screw position.
RoHS-compliant: yes
