Hand lever, adjustable - HYGIENIC DESIGN | SM 1179-1

SCHOLZ MECHANIK GmbH

from €57.07*

€57.07*

Prices incl. VAT plus shipping costs

Available in 5 days

This product is available in 4 versions.

Diameter 1

M06

M08

M10

Length 1

63,00

78,00

Surface

Product number: 109094

Description Datasheet

Variants table
Diameter 1	Length 1	Surface	Product number	Unit price	Buy

Product information "Hand lever, adjustable - HYGIENIC DESIGN | SM 1179-1 "

stainless steel
with internal thread

Material:
handle: stainless steel precision casting 1.4308 polished (Ra < 0.8 μm)
thread bush: stainless steel 1.4301
sealing ring / wiper: hydrogenated acrylonitrile butadiene rubber (H-NBR)
temperature resistant -25 °C to +150 °C
Hardness 85±5 Shore A
FDA compliant
blue

These stainless steel clamping levers with solid stainless steel handles are designed for use in hygienic areas. The sealing screw-on surface enables dead space-free fastening.
The polished surface prevents dirt from adhering and makes cleaning easier.
Preferably used for limited clamping ranges or when a specific clamping position is required.
Lever adjustment by pulling. The handle engages automatically when released.
Threaded insert detachably connected to handle by serration.

RoHS-compliant: yes

Compliance:	RoHS compliant
For use in sensitive areas:	Hygienic Design
Material:	Knob / Handle: Stainless Steel, Lever: Stainless steel, Stainless steel
Speciality:	Locking by self-locking, With internal thread, With sealing ring
Surface:	polished
Type of use:	Clamping lever, Lever

Zubehör

Sealing ring - HYGIENIC DESIGN | SM 1291-15

Material: H-NBR: hydrogenated acrylonitrile butadiene rubberbluetemperature resistant -25 °C to +150 °CFDA compliantHardness: 85 ±5 Shore A As unassembled, the sealing rings haver the “actual dimensions” as stated in the table.To ensure a reliable sealing, an installation space must be provided in the component as shown in the drawing. This ensures that when the sealing ring is installed, it will be subject to the necessary pressure without excess load. All contact surfaces should have a minimum surface quality of Ra 0.8 μm.On request: - Ethylene-propylene-diene rubber (EPDM) temperature-resistant -40 °C to +120 °C - Fluorine rubber (FKM) temperature-resistant -5 °C to +200 °C RoHS-compliant: yes Other items from the HYGIENIC DESIGN range SM 1179-1 Clamping lever SM 1179-2 Clamping lever with screw SM 1206-4 Star knobs SM 1206-5 Three-star grips SM 1207-2 Wing nuts / T-handles SM 1265-7/8 Knobs SM 1265-9/10 Nuts/screws SM 1265-11/12 Screws, low SM 1265-13 Spacers SM 1268-4/5 Latches SM 1269-5 Bow handles SM 1273-32/33 Locking bolt SM 1291-15 Sealing ring SM 1291-16 Wiper SM 3150 Adjustable feet SM 3151 Cover sleeves

From €1.30* incl. VAT

Details

Ähnliche Artikel

Hand lever, adjustable - HYGIENIC DESIGN | SM 1179-2

stainless steel adjustable, with screw Material:handle: stainless steel precision casting 1.4308, polished (Ra < 0.8 μm)threaded stud: stainless steel 1.4301sealing ring / wiper: hydrogenated acrylonitrile, butadiene rubber (H-NBR) temperature resistant -25 °C to +150 °CHardness 85±5 Shore A FDA compliantblue These rustproof clamping levers with solid stainless steel handles are intended for use in hygienic areas. The sealing screw-on surface enables dead space-free fastening. The polished surface prevents dirt from adhering and makes cleaning easier. Preferably used for limited clamping ranges or when a specific clamping position is required. Lever adjustment by pulling. The handle engages automatically when released. Threaded insert detachably connected to handle by serration. RoHS-compliant: yes

From €57.50* incl. VAT

Details

Hand lever, adjustable | SM 1180

with bushing Material: bushing / thread insert and screw:ST: steel, blackenedNI: stainless steel serrated ring: zinc die-casting handle: plasitc Technopolymer (Polyamide PA)glass fibre reinforced temperature resistant up to 130° CColor / surface: SG = black-grey, matt RAL 7021 OR = orange, matt RAL 2004Good handling of the lever due to slight curvature and reinforcement at the end of the lever. Lever adjustment by lifting the handle. The handle engages automatically when released. The threaded insert is detachably connected to the handle by a serration. RoHS-compliant: yes

From €4.03* incl. VAT

Details

Mini-hand lever | SM 1182

adjustablewith bushing Material:bushing / thread insert and retaining screw:ST: steel blackenedNI: stainless steel 1.4305handle: zinc die casting plastic coatedColors / finishes:RH = uncoatedCR = chrome-platedplastic coated:OR = orange RAL 2004RS = red textured inish RAL 3000SB = silver RAL 9006SW = black textured finish RAL 9005SZ = black silk finish RAL 9005 Good handling due to reinforcement at the end of the lever. Lever adjustment by lifting the handle. The handle engages automatically when released. Threaded insert detachably connected to handle by serration. RoHS-compliant: yes

From €4.19* incl. VAT

Details

Hand lever, adjustable | SM 1186

with bushingMaterial:thread insert and retaining screw:ST: steel blackenedNI: stainless steel 1.4305handle: zinc die casting Colors / surfaces:plastic coatedSW = black, textured finish RAL 9005OR = orange, textured finish RAL 2004By lifting the lever, the serrations are disengaged. The handle can be positioned by the serrations, and the threaded insert can be exchanged. Upon releasing the handle, the serrations are automatically reengaged. These adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position.RoHS-compliant: yes

From €5.50* incl. VAT

Details

Hand lever, adjustable | SM 1189

with bushing Material:bushing and retaining screw: ST: steel, blackened handle: zinc die casting Colors / surfaces: CR = chrome-plated RH = uncoatedplastic coatedOR = orange RAL 2004RS = red textured finish RAL 3000SB = silver RAL 9006SW = black textured finish RAL 9005SZ = black silk finish RAL 9005 Good handling due to thickening at the end of the handle. Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position. When released, the handle engages again automatically. For use with a limited clamping range or with a specific fixed clamping position.Bushing and retaining screw made of stainless steel (SM 1197). RoHS-compliant: yes

From €4.66* incl. VAT

Details

Hand lever, adjustable | SM 1189-1

clamping lever with bushing and washer Material: threaded bushing and retaining screw: steel, blackenedwasher: steel, case hardened, blackened handle: zinc die casting plastic coated Colors / surfaces:plastic coatedOR = orange textured finish RAL 2004RS = red textured finish RAL 3000SB = silver textured finish RAL 9006SW = black textured finish RAL 9005 Good handling due to thickening at the end of the handle. Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position. When “released”, the handle engages again automatically. The support washer is captive, does not rotate when tightening and protects the clamping surface and protects the clamping surface from damage. A typical application is the use of clamping levers for slotted holes. RoHS-compliant: yes

From €11.72* incl. VAT

Details

Hand lever, adjustable | SM 1190-1

with releasing button and with bushing Material:thread insert: brasshandle: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant up to 120° Creleasing button: plastic, blackColor / surface:SW = black, matt RAL 9005 Lever adjustment by pulling or pushing.The screw insert is detachably connected to the handle by a serration.Lifting the handle releases the serration and the clamping lever can be swung into the most favorable clamping position.When “released”, the handle engages again automatically.The disengagement button enables effortless disengagement.Application with limited clamping range or for certain clamping positions or if it is not necessary to remove the lever when screwing in. RoHS-compliant: yes

From €3.33* incl. VAT

Details

Hand lever, adjustable | SM 1192

Clamping leverwith threaded bush Material: threaded insert and retaining screw: steel, blackenedhandle: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant -30° C up to 130° C Color / surface:SW = black, matt RAL 9005OR = orange, matt RAL 2004 (Remaining stock in individual sizes, reordering no longer possible)The data sheet will be updated shortly. Lever adjustment by pulling or pushing.The threaded insert is detachably connected to the handle by a serration.By lifting (pulling) the handle, the serration is released and the clamping lever can be pivoted to the most favorable clamping position.When released, the handle engages again automatically. Used for limited clamping ranges or for specific clamping positions.RoHS-compliance: yes

From €4.89* incl. VAT

Details

Hand lever, adjustable | SM 1198

bushing from stainless steel Material:bushing and retaining screw: stainless steel 1.4305handle: zinc die casting Colours /surfaces:CR = chrome-platedRH = uncoatedplastic coatedOR = orange RAL 2004RS = red textured finish RAL 3000SB = silver RAL 9006SW = black textured finish RAL 9005SZ = black silk finish RAL 9005 Good handling due to thickening at the end of the handle.Lever adjustment by pulling.The threaded insert is detachably connected to the handle by a serration.By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position.When released, the handle engages again automatically.For use with a limited clamping range or with a specific fixed clamping position.Screw and retaining screw made of steel (SM 1189). RoHS-compliant: yes

From €6.74* incl. VAT

Details

Hand lever, adjustable | SM 1199-1

Clamping leverstainless steel Material: handle: staniless steel 1.4308, matt blastedbushing: staniless steel 1.4305screw: staniless steel 1.4305spring: staniless steel 1.4310 Form IS: with internal hexalobularForm AS: with external hexagon Good handling due to thickening at the end of the handle. Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position. When released, the handle engages again automatically. For use with a limited clamping range or with a certain fixed clamping position. Application e.g. in the food or chemical industry. RoHS-compliant: yes

From €14.36* incl. VAT

Details

Hand lever, adjustable - HYGIENIC DESIGN | SM 1179-1

stainless steelwith internal thread

stainless steel
with internal thread