Hand lever, adjustable | SM 1189

SCHOLZ MECHANIK GmbH

Variants table
Colour	Diameter 1	Length 1	Product number	Unit price	Buy

Product information "Hand lever, adjustable | SM 1189"

with bushing

Material:
bushing and retaining screw:
ST: steel, blackened
handle: zinc die casting

Colors / surfaces:
CR = chrome-plated
RH = uncoated
plastic coated
OR = orange RAL 2004
RS = red textured finish RAL 3000
SB = silver RAL 9006
SW = black textured finish RAL 9005
SZ = black silk finish RAL 9005

Good handling due to thickening at the end of the handle.
Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration.
By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position.
When released, the handle engages again automatically.
For use with a limited clamping range or with a specific fixed clamping position.

Bushing and retaining screw made of stainless steel (SM 1197).

RoHS-compliant: yes

Colour:	black, black - silk gloss, orange, red, silver
Compliance:	RoHS compliant
Material:	Bushing/Screw: Steel, Lever: Zinc die casting
Speciality:	Locking by self-locking, With internal thread, with internal hexagon
Surface:	Steel - burnished, plastic coated, raw / unpainted, verchromt
Type of use:	Clamping lever, Lever

Ähnliche Artikel

Hand lever, adjustable - HYGIENIC DESIGN | SM 1179-1

stainless steelwith internal threadMaterial:handle: stainless steel precision casting 1.4308 polished (Ra < 0.8 μm)thread bush: stainless steel 1.4301sealing ring / wiper: hydrogenated acrylonitrile butadiene rubber (H-NBR) temperature resistant -25 °C to +150 °C Hardness 85±5 Shore A FDA compliantblueThese stainless steel clamping levers with solid stainless steel handles are designed for use in hygienic areas. The sealing screw-on surface enables dead space-free fastening. The polished surface prevents dirt from adhering and makes cleaning easier. Preferably used for limited clamping ranges or when a specific clamping position is required. Lever adjustment by pulling. The handle engages automatically when released. Threaded insert detachably connected to handle by serration. RoHS-compliant: yes

From €57.07* incl. VAT

Details

Hand lever, adjustable | SM 1180

with bushing Material: bushing / thread insert and screw:ST: steel, blackenedNI: stainless steel serrated ring: zinc die-casting handle: plasitc Technopolymer (Polyamide PA)glass fibre reinforced temperature resistant up to 130° CColor / surface: SG = black-grey, matt RAL 7021 OR = orange, matt RAL 2004Good handling of the lever due to slight curvature and reinforcement at the end of the lever. Lever adjustment by lifting the handle. The handle engages automatically when released. The threaded insert is detachably connected to the handle by a serration. RoHS-compliant: yes

From €4.03* incl. VAT

Details

Mini-hand lever | SM 1182

adjustablewith bushing Material:bushing / thread insert and retaining screw:ST: steel blackenedNI: stainless steel 1.4305handle: zinc die casting plastic coatedColors / finishes:RH = uncoatedCR = chrome-platedplastic coated:OR = orange RAL 2004RS = red textured inish RAL 3000SB = silver RAL 9006SW = black textured finish RAL 9005SZ = black silk finish RAL 9005 Good handling due to reinforcement at the end of the lever. Lever adjustment by lifting the handle. The handle engages automatically when released. Threaded insert detachably connected to handle by serration. RoHS-compliant: yes

From €4.19* incl. VAT

Details

Hand lever, adjustable | SM 1184

with releasing button with bushing Material:thread bush: MS: brass NI: 1.4305embedded in glass fibre reinforced black plastic handle: plasitc Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant up to 130° (chromed handle: 80°)black-grey, matt, similar to RAL 7021releasing button: plastic, shiny finishcolour of the button:SG = black-grey RAL 7021OR = orange RAL 2004GR = grey RAL 7035GB = yellow RAL 1021GN = green RAL 6017RT = red RAL 3000BL = blue RAL 5024 CR = handle chrome plated, black button Good handling due to curved shape and reinforcement at the end of the lever. The clamping position can be changed by lifting the handle or pressing the release button. The handle engages automatically when released. The threaded insert is detachably connected to the handle by a serration. When the handle is disengaged, the threaded insert can also be screwed in with the help of the edge notch. RoHS-compliant: yes

From €2.51* incl. VAT

Details

Hand lever, adjustable | SM 1186

with bushingMaterial:thread insert and retaining screw:ST: steel blackenedNI: stainless steel 1.4305handle: zinc die casting Colors / surfaces:plastic coatedSW = black, textured finish RAL 9005OR = orange, textured finish RAL 2004By lifting the lever, the serrations are disengaged. The handle can be positioned by the serrations, and the threaded insert can be exchanged. Upon releasing the handle, the serrations are automatically reengaged. These adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position.RoHS-compliant: yes

From €5.50* incl. VAT

Details

Hand lever, adjustable | SM 1189-1

clamping lever with bushing and washer Material: threaded bushing and retaining screw: steel, blackenedwasher: steel, case hardened, blackened handle: zinc die casting plastic coated Colors / surfaces:plastic coatedOR = orange textured finish RAL 2004RS = red textured finish RAL 3000SB = silver textured finish RAL 9006SW = black textured finish RAL 9005 Good handling due to thickening at the end of the handle. Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position. When “released”, the handle engages again automatically. The support washer is captive, does not rotate when tightening and protects the clamping surface and protects the clamping surface from damage. A typical application is the use of clamping levers for slotted holes. RoHS-compliant: yes

From €11.72* incl. VAT

Details

Hand lever, adjustable | SM 1190-1

with releasing button and with bushing Material:thread insert: brasshandle: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant up to 120° Creleasing button: plastic, blackColor / surface:SW = black, matt RAL 9005 Lever adjustment by pulling or pushing.The screw insert is detachably connected to the handle by a serration.Lifting the handle releases the serration and the clamping lever can be swung into the most favorable clamping position.When “released”, the handle engages again automatically.The disengagement button enables effortless disengagement.Application with limited clamping range or for certain clamping positions or if it is not necessary to remove the lever when screwing in. RoHS-compliant: yes

From €3.33* incl. VAT

Details

Hand lever, adjustable | SM 1192

Clamping leverwith threaded bush Material: threaded insert and retaining screw: steel, blackenedhandle: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant -30° C up to 130° C Color / surface:SW = black, matt RAL 9005OR = orange, matt RAL 2004 (Remaining stock in individual sizes, reordering no longer possible)The data sheet will be updated shortly. Lever adjustment by pulling or pushing.The threaded insert is detachably connected to the handle by a serration.By lifting (pulling) the handle, the serration is released and the clamping lever can be pivoted to the most favorable clamping position.When released, the handle engages again automatically. Used for limited clamping ranges or for specific clamping positions.RoHS-compliance: yes

From €4.89* incl. VAT

Details

Hand lever, adjustable | SM 1198

bushing from stainless steel Material:bushing and retaining screw: stainless steel 1.4305handle: zinc die casting Colours /surfaces:CR = chrome-platedRH = uncoatedplastic coatedOR = orange RAL 2004RS = red textured finish RAL 3000SB = silver RAL 9006SW = black textured finish RAL 9005SZ = black silk finish RAL 9005 Good handling due to thickening at the end of the handle.Lever adjustment by pulling.The threaded insert is detachably connected to the handle by a serration.By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position.When released, the handle engages again automatically.For use with a limited clamping range or with a specific fixed clamping position.Screw and retaining screw made of steel (SM 1189). RoHS-compliant: yes

From €6.74* incl. VAT

Details

Hand lever, adjustable | SM 1199-1

Clamping leverstainless steel Material: handle: staniless steel 1.4308, matt blastedbushing: staniless steel 1.4305screw: staniless steel 1.4305spring: staniless steel 1.4310 Form IS: with internal hexalobularForm AS: with external hexagon Good handling due to thickening at the end of the handle. Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position. When released, the handle engages again automatically. For use with a limited clamping range or with a certain fixed clamping position. Application e.g. in the food or chemical industry. RoHS-compliant: yes

From €14.36* incl. VAT

Details