Hand lever, adjustable - HYGIENIC DESIGN | SM 1179-2

Filter
Product information "Hand lever, adjustable - HYGIENIC DESIGN | SM 1179-2 "

stainless steel
adjustable, with screw

Material:
handle:
stainless steel precision casting 1.4308, polished (Ra < 0.8 μm)
threaded stud: stainless steel 1.4301
sealing ring / wiper: hydrogenated acrylonitrile, butadiene rubber (H-NBR)
temperature resistant -25 °C to +150 °C
Hardness 85±5 Shore A
FDA compliant
blue

These rustproof clamping levers with solid stainless steel handles are intended for use in hygienic areas.
The sealing screw-on surface enables dead space-free fastening.
The polished surface prevents dirt from adhering and makes cleaning easier.
Preferably used for limited clamping ranges or when a specific clamping position is required.
Lever adjustment by pulling. The handle engages automatically when released.
Threaded insert detachably connected to handle by serration.

RoHS-compliant: yes

Compliance: RoHS compliant
For use in sensitive areas: Hygienic Design
Material: Knob / Handle: Stainless Steel, Lever: Stainless steel, Stainless steel
Speciality: Locking by self-locking, With sealing ring, With threaded stud
Surface: polished
Type of use: Clamping lever, Lever

Zubehör

Sealing ring - HYGIENIC DESIGN | SM 1291-15
Sealing ring - HYGIENIC DESIGN | SM 1291-15
Material: H-NBR: hydrogenated acrylonitrile butadiene rubberbluetemperature resistant -25 °C to +150 °CFDA compliantHardness: 85 ±5 Shore A As unassembled, the sealing rings haver the “actual dimensions” as stated in the table.To ensure a reliable sealing, an installation space must be provided in the component as shown in the drawing. This ensures that when the sealing ring is installed, it will be subject to the necessary pressure without excess load. All contact surfaces should have a minimum surface quality of Ra 0.8 μm.On request: - Ethylene-propylene-diene rubber (EPDM) temperature-resistant -40 °C to +120 °C - Fluorine rubber (FKM) temperature-resistant -5 °C to +200 °C RoHS-compliant: yes Other items from the HYGIENIC DESIGN range SM 1179-1 Clamping lever SM 1179-2 Clamping lever with screw SM 1206-4 Star knobs SM 1206-5 Three-star grips SM 1207-2 Wing nuts / T-handles SM 1265-7/8 Knobs SM 1265-9/10 Nuts/screws SM 1265-11/12 Screws, low SM 1265-13 Spacers SM 1268-4/5 Latches SM 1269-5 Bow handles SM 1273-32/33 Locking bolt SM 1291-15 Sealing ring SM 1291-16 Wiper SM 3150 Adjustable feet SM 3151 Cover sleeves  

From €1.30* incl. VAT

Ähnliche Artikel

Hand lever, adjustable  - HYGIENIC DESIGN | SM 1179-1
Hand lever, adjustable - HYGIENIC DESIGN | SM 1179-1
stainless steelwith internal threadMaterial:handle: stainless steel precision casting 1.4308 polished (Ra < 0.8 μm)thread bush: stainless steel 1.4301sealing ring / wiper: hydrogenated acrylonitrile butadiene rubber (H-NBR) temperature resistant -25 °C to +150 °C Hardness 85±5 Shore A FDA compliantblueThese stainless steel clamping levers with solid stainless steel handles are designed for use in hygienic areas. The sealing screw-on surface enables dead space-free fastening. The polished surface prevents dirt from adhering and makes cleaning easier. Preferably used for limited clamping ranges or when a specific clamping position is required. Lever adjustment by pulling. The handle engages automatically when released. Threaded insert detachably connected to handle by serration. RoHS-compliant: yes

From €51.77* incl. VAT
Hand lever | SM 1181
Hand lever | SM 1181
adjustable with threaded stud Material: threaded stud and retaining screw:ST: steel, property class 5.8, blackenedNI: stainless steel 1.4305 serrated ring: zinc die-casting handle: plastic thermoplastic (polyamide PA) glass fiber reinforced temperature-resistant up to 130° CColor / surface:SG = black-grey, matt  RAL 7021OR = orange, matt  RAL 2004 Good handling of the lever due to slight curvature and reinforcement at the end of the lever. Lever adjustment by lifting the handle. The handle engages automatically when released. The threaded insert is detachably connected to the handle by a serration. RoHS-compliant: yes

From €3.55* incl. VAT
Mini clamping lever | SM 1183
Mini clamping lever | SM 1183
adjustablewith screw Material:Screw insert and retaining screw:ST: Steel, strength class 5.8, burnishedNI: Stainless steelHandle body: Die-cast zinc Colors / surfaces:RH = unpaintedCR = chrome-platedplastic-coatedOR = orange RAL 2004RS = red - textured matt RAL 3000SB = silver RAL 9006SW = black - textured matt RAL 9005SZ = black - silk matt RAL 9005CR = Chrome-plated handle bodyGood handling due to reinforcement at the end of the lever.Lever adjustment by lifting the handle.The handle engages automatically when released.Threaded insert detachably connected to handle by serration. RoHS-compliant: yes

From €4.68* incl. VAT
Hand lever, adjustable | SM 1185
Hand lever, adjustable | SM 1185
with releasing buttonwith threaded studMaterial:thread stud and retaining screw:ST: steel, zinc plated, blue passivatedNI: stainless steel 1.4305screw insert: embedded in black glass fiber reinforced plastichandle: plastic Technopolymer (Polyamide PA)glass fiber reinforcedtemperature resistant up to 130 °Cblack-gray, matte, similar to RAL 7021releasing button: plastik, shiny finishcolour of the button:BL = blue, RAL 5024OR = orange, RAL 2004GR = grey, RAL 7035GB = yellos, RAL 1021GN = green, RAL 6017RT = red, RAL 3000SG = black-gray, RAL 7021Good handling due to curved shape and reinforcement at the end of the lever.The clamping position can be changed by lifting the handle or pressing the release button.The handle engages automatically when released.The threaded insert is detachably connected to the handle by a serration.When the handle is disengaged, the threaded insert can also be screwed in with the help of the edge notch.RoHS-compliant: yes

From €2.38* incl. VAT
 Hand lever, adjustable | SM 1188
Hand lever, adjustable | SM 1188
with threaded studMaterial:Threaded stud and retaining screw:ST: steel property class 5.8, blackenedhandle: zinc die castingColors / surfaces:CR = chrome-platedRH = uncoatedplastic coatedOR = orange RAL 2004RS = red textured finish RAL 3000SB = silver RAL 9006SW = black textured finish RAL 9005SZ = black silk finish RAL 9005Good handling due to thickening at the end of the handle. Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position. When released, the handle engages again automatically. For use with a limited clamping range or with a specific fixed clamping position. Screw insert and retaining screw made of stainless steel (SM 1197). RoHS-compliant: yes

From €4.83* incl. VAT
Hand lever, adjustable | SM 1189-2
Hand lever, adjustable | SM 1189-2
clamping lever with threaded stud and support washer Material: threaded stud and retaining screw: steel, blackenedwasher: steel, case hardened, blackened handle: zinc die casting plastic coated colors / surfaces:plastic coatedOR = orange textured finish RAL 2004RS = red textured finish RAL 3000SB = silver textured finish RAL 9006SW = black textured finish RAL 9005 Good handling due to thickening at the end of the handle.Lever adjustment by pulling. The threaded insert is detachably connected to the handle by a serration.By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position.When “released”, the handle engages again automatically.The support washer is captive, does not rotate when tightening and protects the clamping surface and protects the clamping surface from damage.A typical application is the use of clamping levers for slotted holes. RoHS-compliant: yes

From €10.38* incl. VAT
Clamping lever | SM 1190
Clamping lever | SM 1190
adjustable hand lever with releasing button and with threaded stud Material:threaded stud: steel, zinc plated, blue passivatedhandle: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant up to 120° Creleasing button: plastic, black Color / surface:SW = black, matt RAL 9005 Lever adjustment by pulling or pushing. The screw insert is detachably connected to the handle by a serration. Lifting the handle releases the serration and the clamping lever can be swung into the most favorable clamping position. When “released”, the handle engages again automatically. The disengagement button enables effortless disengagement. Application with limited clamping range or for certain clamping positions or if it is not necessary to remove the lever when screwing in. RoHS-compliant: yes

From €3.14* incl. VAT
Hand lever, adjustable | SM 1191
Hand lever, adjustable | SM 1191
with threaded stud Material:threaded stud and retaining screw: steel, blackenedhandle: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant up to 130° CColor / surface:SW = black, RAL 9005 mattOR = orange, RAL 2004 matt Lever adjustment by pulling or pushing. The threaded insert is detachably connected to the handle by a serration. By lifting (pulling) the handle, the serration is released and the clamping lever can be pivoted to the most favorable clamping position. When released, the handle engages again automatically. Used for limited clamping ranges or for specific clamping positions. RoHS-compliant: yes

From €4.72* incl. VAT
Hand lever, adjustable | SM 1197
Hand lever, adjustable | SM 1197
with threaded stud from stainless steelMaterial: threaded stud and retaining screw: stainless steel 1.4305handle: zinc die castingColours / surfaces: CR = chrome-platedRH = uncoated plastic coatedOR = orange RAL 2004 RS = red textured finish RAL 3000 SB = silver RAL 9006 SW = black textured finish RAL 9005 SZ = black silk finish RAL 9005Good handling due to thickening at the end of the handle.Lever adjustment by pulling.The threaded insert is detachably connected to the handle by a serration.By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position.When released, the handle engages again automatically.For use with a limited clamping range or with a specific fixed clamping position.Screw and retaining screw made of steel (SM 1188).RoHS-compliant: yes

From €6.68* incl. VAT
Hand lever, adjustable | SM 1199
Hand lever, adjustable | SM 1199
Clamping leverstainless steelMaterial:handle: stainless steel  1.4308 matt blastedthreaded stud: stainless steel  1.4305retaining screw: stainless steel   1.4305pressure spring: stainless steel   1.4310 Form IS: with internal hexalobularForm AS: with external hexagon Good handling due to thickening at the end of the handle.Lever adjustment by pulling.The threaded insert is detachably connected to the handle by a serration.By lifting (pulling) the handle, the serration is released and the clamping lever can be swung into the most favorable clamping position.When released, the handle engages again automatically.For use with a limited clamping range or with a certain fixed clamping position.Application e.g. in the food or chemical industry. RoHS-compliant: yes

From €13.86* incl. VAT