Hinge, adjustable

Variants table
Colour	Form	Length 1	Product number	Unit price	Buy

Product information "Hinge adjustable | SM 1610"

Material:
adjustable bush: steel, hardened
cover: plastic
pin: stainless steel, 1.4305

hinge: zinc die casting,
SW = plastic coated, black RAL 9005, textured finish
Cover: black grey
SR = plastic coated; silver RAL 9006, textured finish
Cover: light grey

Form BJ: adjustable on both sides
Form EJ: one-sided adjustable
Form NJ: not adjustable

RoHS-compliant: yes

Colour:	black, silver
Compliance:	RoHS compliant
Element type:	Hinges
Material:	Lever: Zinc die casting, Plastic
Speciality:	adjustable, cannot be locked
Surface:	plastic coated - textured matt

Ähnliche Artikel

Hinge, three-part | SM 1601

Material:hinge: steel, galvanized, blue passivatedwasher: brass, nickel-platedpin: brass, nickel-plated Form A: fastening on operator side Application for doors that are flush with the frame on the outside and rest on it.Cannot be unhinged when mounted.Installation with DIN 912 cylinder screws in any wall thickness using existing threads or in through-holes. RoHS-compliant: yes

From €22.81* incl. VAT

Details

Hinge | SM 1605

Material:Hinge body: zinc die-castZD CR: zinc die-cast, chrome-platedZD SR: zinc die-cast, plastic-coated, silver RAL 9006ZD SW: zinc die-cast, plastic-coated, black RAL 9005pin: stainless steel, 1.4305threaded pin (form B): stainless steel, 1.4401 Hinge body: AluminumAL EL: Aluminium, natural anodizedpin: stainless steel, 1.4404 (A4) Form A: installation via 2 x 2 holes for countersunk screws (AL + ZD)Form B: installation via 2 x 2 threaded studs (ZD only) These hinges are very compact and stable.With their different material and surface finishes and twowith two mounting forms, they can be used very specifically. RoHS-compliant: yes

From €6.08* incl. VAT

Details

Hinge, stainless steel | SM 1606

Material:Form ANI: stainless steel, 1.4308NI A4: stainless steel, 1.4408matt blastedpin: stainless steel, 1.4404 (A4) Form BNI: stainless steel, 1.4308matt blastedpin: stainless steel, 1.4308cast in one piece Form A: installation via 2 x 2 holes for countersunk screws (NI + NI A4)Form B: installation via 2 x 2 grub screws (NI only) These hinges are very compact and stable.With their different material designs and with two mounting forms, they can be used very specifically. RoHS-compliant: yes

From €12.78* incl. VAT

Details

Heavy duty hinge | SM 1607

Material:hinge body: stainless steel, 1.4405hinge pin: stainless steel, 1.4542, hardened and tempered,lubricated with special greaseshim washers: stainless steel, 1.4310, hardened and temperedlubricated with special greaseNI MT = stainless steel, matt blastedNI SW = stainless steel, powder coated, textured black RAL 9005 Form A: with holes for countersunk screwsForm B: with holes for countersunk screws and centering attachements These heavy-duty hinges can be used under difficult conditions.The form-fit pressed hinge pins allow the hinges to be installed on parts subject to strong vibrations and shocks.The material of the hinge wings is high-strength,however, due to the martensitic structure, the hinges are only suitable for use in aggressive environments to a limited extent. RoHS-compliant: yes

From €22.41* incl. VAT

Details

Hinge, detachable | SM 1608

Material: pin: stainless steel, 1.4305washer: plastic hinge body: zinc die-castZD SR: zinc die-cast, powder coated, silver RAL 9006ZD SW: zinc die-cast, powder coated, black RAL 9005 hinge body: stainless steel, 1.4308NI: stainless steel, matt blasted Form A: fixed bearing (pin) on the rightForm B: fixed bearing (pin) left Mounting via 2 x 2 holes for countersunk screws. RoHS-compliant: yes

From €9.51* incl. VAT

Details

Hinge, adjustable | SM 1609

Material:pin: stainless steel, 1.4571hinge body: zinc die-castZD SR = zinc die-cast, plastic-coated, silver RAL 9006ZD SW = zinc die-cast, plastic-coated, black RAL 9005 hinge body: stainless steel, 1.4408NI A4 = stainless steel A4, matt blasted Form HJ: adjustable in heightForm BJ: adjustable in widthForm HBJ: adjustable in height and width With these hinges, doors and flaps can be positioned in a form-fit and finely graduated manner by moving the adjustment bushes.Door gaps can be readjusted and manufacturing tolerances compensated for.The SM 1609 stainless steel hinges are suitable for applications with particularly aggressive environmental conditions. RoHS-compliant: yes

From €17.24* incl. VAT

Details