Angled ball joint with spring lock DIN 71802 Form CS
Material:
ST: steel, zinc plated
NI: stainless steel, 1.4305
Form CS: with hexagon nut and safety bar, angle of rotation 15°
R = right-hand thread
L = left-hand thread
M04 plastic (ball socket POM)
RoHS-compliant: yes
Material:hinge body: stainless steel, 1.4405hinge pin: stainless steel, 1.4542, hardened and tempered,lubricated with special greaseshim washers: stainless steel, 1.4310, hardened and temperedlubricated with special greaseNI MT = stainless steel, matt blastedNI SW = stainless steel, powder coated, textured black RAL 9005
Form A: with holes for countersunk screwsForm B: with holes for countersunk screws and centering attachements
These heavy-duty hinges can be used under difficult conditions.The form-fit pressed hinge pins allow the hinges to be installed on parts subject to strong vibrations and shocks.The material of the hinge wings is high-strength,however, due to the martensitic structure, the hinges are only suitable for use in aggressive environments to a limited extent.
RoHS-compliant: yes
Material:Hinge body: zinc die-castZD CR: zinc die-cast, chrome-platedZD SR: zinc die-cast, plastic-coated, silver RAL 9006ZD SW: zinc die-cast, plastic-coated, black RAL 9005pin: stainless steel, 1.4305threaded pin (form B): stainless steel, 1.4401
Hinge body: AluminumAL EL: Aluminium, natural anodizedpin: stainless steel, 1.4404 (A4)
Form A: installation via 2 x 2 holes for countersunk screws (AL + ZD)Form B: installation via 2 x 2 threaded studs (ZD only)
These hinges are very compact and stable.With their different material and surface finishes and twowith two mounting forms, they can be used very specifically.
RoHS-compliant: yes
Material:pin: stainless steel, 1.4571hinge body: zinc die-castZD SR = zinc die-cast, plastic-coated, silver RAL 9006ZD SW = zinc die-cast, plastic-coated, black RAL 9005
hinge body: stainless steel, 1.4408NI A4 = stainless steel A4, matt blasted
Form HJ: adjustable in heightForm BJ: adjustable in widthForm HBJ: adjustable in height and width
With these hinges, doors and flaps can be positioned in a form-fit and finely graduated manner by moving the adjustment bushes.Door gaps can be readjusted and manufacturing tolerances compensated for.The SM 1609 stainless steel hinges are suitable for applications with particularly aggressive environmental conditions.
RoHS-compliant: yes
Material:Form ANI: stainless steel, 1.4308NI A4: stainless steel, 1.4408matt blastedpin: stainless steel, 1.4404 (A4)
Form BNI: stainless steel, 1.4308matt blastedpin: stainless steel, 1.4308cast in one piece
Form A: installation via 2 x 2 holes for countersunk screws (NI + NI A4)Form B: installation via 2 x 2 grub screws (NI only)
These hinges are very compact and stable.With their different material designs and with two mounting forms, they can be used very specifically.
RoHS-compliant: yes
Material:hinge: steel, galvanized, blue passivatedwasher: brass, nickel-platedpin: brass, nickel-plated
Form A: fastening on operator side
Application for doors that are flush with the frame on the outside and rest on it.Cannot be unhinged when mounted.Installation with DIN 912 cylinder screws in any wall thickness using existing threads or in through-holes.
RoHS-compliant: yes
for angle joints SM 1291.21 to DIN 71802
Material: Chloroprene rubber (CR)black
Protection against the ingress of dirt into angle joints SM 1291.21. Temperature application range -30°C to 110°C.
RoHS-compliant: yes
Spherical plain bearing, rod ends internal thread DIN ISO 12240-4 K(formerly DIN 648 K)
maintenance free
inner ring: antifriction bearing steel, hardened, ground and polished
outer ring: free cutting steel lined with an antifriction film, consisting of PTFE with metallic fabric, cold formed around inner ring.
housing: sizes 5 to 12 free-cutting steel, turned from size 14 forged tempering steel, size 50 tempering steel, turned. All sizes galvanised. The spherical bearing is pressed into the housing and caulked at both sides.
R = right-hand thread
L = left-hand thread on request
characteristics of application:
- general operating conditions,
- high-thrust and constant static loads, limited swivel
- movements under very difficult lubricating conditions.
Spherical plain bearings, rod ends male thread DIN ISO 12240-4 K
maintenance free
inner ring: antifriction bearing steel, hardened, ground and polished
outer ring: free cutting steel lined with an antifriction film, consisting of PTFE with metallic fabric, cold formed around inner ring.
housing: sizes 5 to 12 free-cutting steel, turned from size 14 forged tempering steel, size 50 tempering steel, turned. All sizes galvanised. The spherical bearing is pressed into the housing and caulked at both sides.
R = right-hand thread
L = left-hand thread on request
characteristics of application:
- general operating conditions,
- high-thrust and constant static loads, limited swivel
- movements under very difficult lubricating conditions.
Spherical plain bearing, rod end female thread DIN ISO 12240-4 K
maintenance free
inner ring: antifriction bearing steel, hardened, ground and polished
outer ring: free cutting steel lined with an antifriction film, consisting of PTFE with metallic fabric, cold formed around inner ring.
housing: sizes 5 to 12 free-cutting steel, turned from size 14 forged tempering steel, size 50 tempering steel, turned. All sizes galvanised. The spherical bearing is pressed into the housing and caulked at both sides.
R = right-hand thread
L = left-hand thread on request
characteristics of application:
- general operating conditions,
- high-thrust and constant static loads, limited swivel
- movements under very difficult lubricating conditions.
cap. = Load capacity
α = Tipping angle
