Latch - HYGIENIC DESIGN | SM 1268-5

SCHOLZ MECHANIK GmbH

from €115.66*

€123.17*

Prices incl. VAT plus shipping costs

Available in 5 days

This product is available in 3 versions.

Diameter 1

30,00

Distance g

22,00

33,00

44,00

Product number: 246656

Description Datasheet

Variants table
Diameter 1	Distance g	Product number	Unit price	Buy

Product information "Latch - HYGIENIC DESIGN | SM 1268-5"

Latch, stainless steel
Operating Side and Latch Arm Side HYGIENIC DESIGN (Full Hygiene)

Material:
Closure housing: stainless steel 1.4404 (A4)
Bolt: stainless steel 1.4408
other parts: stainless steel 1.4404 (A4)

Seals: blue
temperature resistant -40 °C to +110 °C
FDA-compliant
Sealing rings: EPDM, hardness 85 ±5 Shore A
O-ring: EPDM, hardness 70 ±5 Shore A
Other seals / wipers: TPU, hardness 95 ±5 Shore A

All moving parts lubricated with FDA-compliant special grease.
Protection class IP 66

RoHS-compliant: yes

Hygienic Design
These laches are intended for use in hygienic areas and meet hygiene requirements on the actuating and latch side (full hygiene) due to the special fastening nut as well as the optimised latch and hexagonal screw.
Several seals keep the locking mechanism tight.
At the same time, the high surface quality (Ra < 0.8 μm) and the fastening without dead space prevent dirt from adhering and facilitate cleaning.

The latches create a secure closure by rotating a maximum of 90°, which positions the latch arm in the locked position behind the frame.
A latch spacing g of 22 to 44 mm can be covered by different cranked latches.
For the sealing rings to function reliably, the mounting holes on the housing must be right-angled, burr-free and without chamfer.

Delivery: loosely enclosed latch arm.

Mounting instructions
The lock housing is inserted from the front through the mounting hole and screwed on from the rear with the fastening nut.
The bolt is fastened with the hexagon head

Compliance:	RoHS compliant
For use in sensitive areas:	Hygienic Design
Material:	Knob / Handle: Stainless Steel, Stainless steel
Speciality:	Locking by snapping, With sealing ring, With two key surfaces
Type of use:	Closing elements

Zubehör

Socket key - HYGIENIC DESIGN | SM 1268-4S

Socket keyHYGIENIC DESIGN Material:Plastic thermoplastic (Polyamide PA)glass fiber reinforcedblue for latches in Hygienic Design SM 1268-4 und SM 1268-5 with Hole d2 for loss prevention RoHS-konform: ja

From €4.06* incl. VAT

Details

Sealing ring - HYGIENIC DESIGN | SM 1291-15

Material: H-NBR: hydrogenated acrylonitrile butadiene rubberbluetemperature resistant -25 °C to +150 °CFDA compliantHardness: 85 ±5 Shore A As unassembled, the sealing rings haver the “actual dimensions” as stated in the table.To ensure a reliable sealing, an installation space must be provided in the component as shown in the drawing. This ensures that when the sealing ring is installed, it will be subject to the necessary pressure without excess load. All contact surfaces should have a minimum surface quality of Ra 0.8 μm.On request: - Ethylene-propylene-diene rubber (EPDM) temperature-resistant -40 °C to +120 °C - Fluorine rubber (FKM) temperature-resistant -5 °C to +200 °C RoHS-compliant: yes Other items from the HYGIENIC DESIGN range SM 1179-1 Clamping lever SM 1179-2 Clamping lever with screw SM 1206-4 Star knobs SM 1206-5 Three-star grips SM 1207-2 Wing nuts / T-handles SM 1265-7/8 Knobs SM 1265-9/10 Nuts/screws SM 1265-11/12 Screws, low SM 1265-13 Spacers SM 1268-4/5 Latches SM 1269-5 Bow handles SM 1273-32/33 Locking bolt SM 1291-15 Sealing ring SM 1291-16 Wiper SM 3150 Adjustable feet SM 3151 Cover sleeves

From €1.30* incl. VAT

Details

Wiper - Hygienic Design | SM 1291-16

Material:TPU: Thermoplastic polyurethanebluetemperature resistant -20 °C to +110 °CFDA complianthardness: 95 ±5 Shore A When used in hygienic areas, these wipers can be used to seal axially or radially moving components with a cylindrical cross-section against their bearing position.With their specially shaped sealing lip, the wipers prevent the formation of dead spaces where dust can accumulate. Commercially available wipers are not suitable for this purpose due to a 45° chamfer on the inner edge of the sealing lip. As delivered, or unassembled, the wipers have the “actual dimensions” as stated in the table. To guarantee a secure fit and a reliable seal, the specified installation space must be provided at the bearing position. This ensures that the wiper undergoes the necessary deformation during installation. All surfaces in contact with the wiper should have a minimum surface quality of Ra 0.8 μm. RoHS-compliant: yes Other items from the HYGIENIC DESIGN range SM 1179-1 Clamping lever SM 1179-2 Clamping lever with screw SM 1206-4 Star knobs SM 1206-5 Three-star grips SM 1207-2 Wing nuts / T-handles SM 1265-7/8 Knobs SM 1265-9/10 Nuts/screws SM 1265-11/12 Screws, low SM 1265-13 Spacers SM 1268-4/5 Latches SM 1269-5 Bow handles SM 1273-32/33 Locking bolt SM 1291-15 Sealing ring SM 1291-15 Sealing rings SM 3150 Adjustable feet SM 3151 Cover sleeves

From €5.52* incl. VAT

Details

Ähnliche Artikel

Latch - HYGIENIC DESIGN | SM 1268-4

Latch, stainless steelOperating Side HYGIENIC DESIGN (Front Hygiene) Material:Closure housing: stainless steel 1.4404 (A4)Bolt: stainless steel- 1.4301 / AISI 304 for d1 = 22- 1.4404 / AISI 316L for d1 = 30other parts: stainless steel 1.4404 (A4) Seals: bluetemperature resistant -40 °C to +110 °C FDA-compliant Sealing rings: EPDM, hardness 85 ±5 Shore AO-ring: EPDM, hardness 70 ±5 Shore AOther seals / wipers: TPU, hardness 95 ±5 Shore A All moving parts lubricated with FDA-compliant special grease.Protection class IP 66 RoHS-compliant: yes Hygienic DesignThese laches are intended for use in hygienic areas and meet hygiene requirements on the operating side (front hygiene). Two seals keep the locking mechanism tight. At the same time, the high surface quality (Ra < 0.8 μm) and the fastening without dead space prevent dirt from adhering and facilitate cleaning. The latches lock by means of an actuation rotation limited to 90°.A latch spacing g of 6 to 28 mm can be covered by different cranked latches. For the sealing rings to function reliably, the mounting holes on the housing must be right-angled, burr-free and without chamfer. Delivery: loosely enclosed latch arm. Mounting instructionsThe lock housing is inserted from the front through the mounting hole and screwed on from the rear with the fastening nut. The bolt is fastened with the hexagon head screw.

From €28.79* incl. VAT

Details