Positioning bush G6 | SM 1002
from €13.97*
€13.97*
Delivery time: 1-3 days working days
Delivery time: See variant in the table
This product is available in 64 versions.
Product information "Positioning bush G6 | SM 1002 "
with and without collar
Material: special steel
hardened and ground
Hardness: HRc 63±1
Shape A: without collar
Shape B: with collar
RoHS-compliant: yes
Used in conjunction with positioning pins SM 1020-2.
The tolerance d2 p6 ensures a perfect interference fit in a locating hole H7.
Locating bore in the fixture according to ISO tolerance H7.
Positioning bushes from SCHOLZ MECHANIK are used in many production areas as an inexpensive and wear-resistant component. No longer just for precise drill guidance, but also in combination with other production processes - e.g. 3D printing - the positioning bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.
Drilling positioning bushes are important and useful elements for placement and grid plates for turning and milling centers. Due to their high hardness and tight tolerances, a very high repeat accuracy and long service life can be guaranteed.
Assembly:
The drill diameter should correspond to the bushing diameter,
Press in the bushing at an angle with a flat mandrel or tap in with a soft-face hammer SM 3366A
Similar Items
CAD Data
Drill bushing - DIN 179 A | SM 1000 A
€5.18*
incl. VAT
Form:
A
|
Inside Diameter:
12,50
|
Length:
28,00
|
Outside Diameter:
22,00
Positioning bushDIN 179 / ISO 4247 Form Acylindrical, hardened
Material: Special steelhardened and groundHardness: HRc 63±1
Form A: with one radius without grooves Form B: with two radiuses without grooves you will find as an extra article Drill bushing DIN 179 B | SM 1000 B
RoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7. For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.
Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
on request
Form CA: with one radius, additionally with grooves for gluingForm CB: with two radiuses, additionally with grooves for gluingForm CVA: with one radius, additionally with grooves fand locking device
Form CVB: with two radiuses, additionally with grooves fand locking device
Variants from €1.42*
incl. VAT
CAD Data
Drill bushing - DIN 179 B | SM 1000 B
From
€2.15*
incl. VAT
Form:
B
|
Inside Diameter:
10,00
|
Length:
12,00
|
Outside Diameter:
15,00
Positioning bushDIN 179 / ISO 4247 Form Bcylindrical, hardened
Material: Special steel hardened and ground Hardness: HRc 63±1
Form B: with two radiuses without grooves
Form A: with one radius without grooves
you will find as an extra article Drill bushing DIN 179 A | SM 1000 ARoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7. For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly: the drill diameter should correspond to the bushing diameter, press in the bushing angular with a flat mandrel.
on request
Form CA: with one radius, additionally with grooves for gluing
Form CB: with two radiuses, additionally with grooves for gluing
Form CVA:
with one radius, additionally with grooves and locking device
Form CVB: with two radiuses, additionally with grooves and locking device
Variants from €1.57*
incl. VAT
CAD Data
Drill bushing - DIN 172 A | SM 1001 A
€9.14*
incl. VAT
Form:
A
|
Inside Diameter:
01,30
|
Length:
06,00
|
Outside Diameter:
04,00
Positioning bush DIN 172 / ISO 4247 Form Awith collar, hardenedMaterial: Special steelhardened and ground Hardness: HRc 63±1Form A: with one radius without grooves
Form B: with two radiuses without grooves
you will find as an extra article Drill bushing - DIN 172 B | SM 1001 BRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.For other dimension combinations, see SM 1002. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.on requestForm CA: with one radius, additionally with grooves for gluingForm CB: with two radiuses, additionally with grooves for gluing Form CVA: with one radius, additionally with grooves fand locking deviceForm CVB: with two radiuses, additionally with grooves fand locking device
Variants from €2.76*
incl. VAT
CAD Data
Drill bushing - DIN 172 B | SM 1001 B
€3.18*
incl. VAT
Form:
B
|
Inside Diameter:
02,00
|
Length:
09,00
|
Outside Diameter:
05,00
Positioning bush
DIN 172 / ISO 4247 Form B
with collar, hardened Material: Special steel
hardened and ground
Hardness: HRc 63±1 Form B: with two radiuses without grooves
Form A: with one radius without grooves
you will find as an extra article Drill bushing - DIN 172 A | SM 1001 A RoHS-compliant: yes Locating hole in the workpiece to ISO tolerance H6 or H7.
For other dimension combinations, see SM 1002. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life. on requestForm CA: with one radius, additionally with grooves for gluing
Form CB: with two radiuses, additionally with grooves for gluing
Form CVA: with one radius, additionally with grooves fand locking device
Form CVB: with two radiuses, additionally with grooves fand locking device
Variants from €3.03*
incl. VAT
CAD Data
Drill bushing F7, stainless steel - sim. to DIN 172 | SM 1001N
Form:
A
|
Inside Diameter:
000,50
|
Length:
006
|
Outside Diameter:
003
Positioning bush with collar stainless steel similar to DIN 172 / ISO 4247:1977
Material: Stainless steel 1.4112hardened and groundHardness: HRc 56±1
Form A: with one radius without groovesForm B: with two radiuses without grooves
RoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.
Price on request
CAD Data
Drill bushing F7, carbide - sim. to DIN 172 | SM 1001-02
Form:
B
|
Inside Diameter:
00,60
|
Length:
006
|
Outside Diameter:
003
Drill bushing F7 with collar carbidesim. to DIN 172 / ISO 4247
Material: CarbideSurface: groundHardness: about 90 HRA
Form A: with one radius
Form B: with two radiuses
RoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.
Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.
Price on request
CAD Data
Basic bushing H7 | SM 1002-3
From
€23.78*
incl. VAT
Form:
G
|
Inside Diameter:
28,00
|
Length:
32,00
|
Outside Diameter:
36,00
DIN 173 G und H Part 2for Renewable drill bushings DIN 173 E/ER/ES SM 1002-2
Material: special steelhardened and groundHardness: HRc 63±1
Form G: with headForm H: without head
For renewable drill bushes SM 1002-2.Other dimensions look for SM 1274-8.
RoHS-compliant: yes
Variants from €4.62*
incl. VAT
Locating bushing H6 | SM 1002-30
From
€6.52*
incl. VAT
Diameter 1:
10,00
|
Diameter 2:
15,00
|
Length:
22,00
Positioner socketfor positioning bolts
Material: special steelhardened and groundHardness: HRc 63 ±1
With this socket can be included bolts into existing and larger holes..
RoHS-compliant: yes
Variants from €3.61*
incl. VAT
Guide bushing, conical | SM 1273-55
€12.71*
incl. VAT
Diameter 1:
06,00
|
Length 1:
08,00
|
Material:
Stahl/steel
with collar with conical bore for indexing plungers SM 1273-51
Material:ST: special steelhardened (HRC 62 ±2) and groundNI: stainless steelhardened and ground
The positioning bushings SM 1273-54 and SM 1273-55 with conical bore are used forthe detent bore of indexing plungers SM 1273-51 and allow precise positioning.The length l7 of the indexing pin is determined by the depth of penetration of the indexingpin into the cone of the bushing. The length l8 must ensure complete disengagement of the indexing pin. When engaged, the pin must have at least 0.5 mm residual stroke so that the conical part of the pin is seated in the cone of the positioning bush without play.To accommodate the positioning bushings (outer Ø with tolerance n6), the locating holes hould have tolerance H7.
RoHS-compliant: yes
Accessories
SUPERCRAFT Soft-face hammer | SM 3366A
€184.68*
incl. VAT
Form:
A
|
Head diameter:
80,00
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: filled with steel shotHandle: HickoryImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Robust powder coating | Inserts made of special nylon with maximum strength | Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceableThe tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Hall construction, steel construction, exhibition Positioning and joining of workpieces in the vice, sheet-metal working, assembly f sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Driving steel wedges, Maintenance / Repair / Overhaul
Variants from €34.36*
incl. VAT
SUPERCRAFT Soft-face hammer | SM 3377A
€40.85*
incl. VAT
Form:
A
|
Head diameter:
30,00
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: fi lled with steel shotHandle: steel tube and ergonomic rubber gripImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable
The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working
Variants from €38.23*
incl. VAT
Indexing plunger | SM 1273-50
€29.56*
incl. VAT
Diameter 1:
06,00
|
Form:
C
|
Length 1:
18,00
Indexing plunger for screwing onfor precision locating, plunger pin cylindrical
Material:steel, blackenedplunger: hardened and groundknob: black plastic (Polyamide PA), matt finish, not removable
Form B: without rest positionForm C: with rest position, knob is turned 90
Indexing plungers SM 1273-50, together with guide bushings SM 1002 sim. to DIN 172 / DIN 179, enable precise positioning.The bushings are used to guide the plunger pin as well as for the indexing bore. Larger guide lengths further increase the precision.Two different plunger pin lengths l1 are available for each indexing plunger diameter d1. The length l3 must ensure that the plunger pin fully disengages, bushing length and plate thickness plus any gap can then be selected within certain margins.To accommodate the positioning bushings (outer Ø with tolerance n6), a locating holewith tolerance H7 is usually provided.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.A notch keeps the plunger in this position.
RoHS-compliant: yes
Variants from €22.26*
incl. VAT
