Drill bushing - DIN 179 A | SM 1000 A
from €1.56*
| Quantity | Unit price |
|---|---|
| To 49 |
€5.70*
|
| To 99 |
€5.40*
|
| To 199 |
€4.84*
|
| To 499 |
€4.56*
|
| From 500 |
€4.00*
|
Delivery time: 1-3 days working days
Delivery time: 1-3 days working days
This product is available in 1773 versions.
Product information "Drill bushing - DIN 179 A | SM 1000 A"
Positioning bush
DIN 179 / ISO 4247 Form A
cylindrical, hardened
Material: Special steel
hardened and ground
Hardness: HRc 63±1
hardened and ground
Hardness: HRc 63±1
Form A: with one radius without grooves
Form B: with two radiuses without grooves
you will find as an extra article Drill bushing DIN 179 B | SM 1000 B
Form B: with two radiuses without grooves
you will find as an extra article Drill bushing DIN 179 B | SM 1000 B
RoHS-compliant: yes
Locating hole in the workpiece to ISO tolerance H6 or H7.
For other dimension combinations, see SM 1005.
For other dimension combinations, see SM 1005.
Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.
Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.
Assembly:
the drill diameter should correspond to the bushing diameter,
press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
the drill diameter should correspond to the bushing diameter,
press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
on request
Form CA: with one radius, additionally with grooves for gluing
Form CB: with two radiuses, additionally with grooves for gluing
Form CVA: with one radius, additionally with grooves fand locking device
Form CVB: with two radiuses, additionally with grooves fand locking device
Form CA: with one radius, additionally with grooves for gluing
Form CB: with two radiuses, additionally with grooves for gluing
Form CVA: with one radius, additionally with grooves fand locking device
Form CVB: with two radiuses, additionally with grooves fand locking device
CAD data
Similar Items
CAD Data
Knurled drill bushing - sim. to DIN 179 | SM 1000-1
Form:
A
|
Inside Diameter:
01,00
|
Length:
06,00
|
Outside Diameter:
04,00
similar to SM 1000 - DIN 179
Material: Special steelhardened and groundHardness: HRc 63±1Form A: with one radiusForm B: with two radiuses
RoHS-compliant: yesWith cording and adhesive grooves for a secure hold in the bonding point.
Price on request
CAD Data
Drill bushing F7, carbide - sim. to DIN 179 | SM 1000-02
From
€90.13*
incl. VAT
Form:
A
|
Inside Diameter:
10,00
|
Length:
012
|
Outside Diameter:
015
Positioning bushingsim. to DIN 179 / ISO 4247cylindrical, CarbideMaterial: CarbideHardness: about 90 HRASurface: groundForm A: with one radius Form B: with two radiuses
RoHS-compliant: yesDrill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - drill bushes can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Due to their high hardness and tight tolerances, a very high repeat accuracy and long service life can be guaranteed.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
Variants from €67.20*
incl. VAT
CAD Data
Renewable drill bushing - DIN 173 A | SM 1002-1
From
€21.15*
incl. VAT
Diameter 1:
005,80
|
Form:
A
Quick-change bushingDIN 173 A Sheet 1Material: special steelhardened and groundhardness: HRc 63±1Basic bushings for this: Drill bushings SM 1000, 1000-1, 1000-2 and 1001.collar screws: SM 1003-1dowel pins: SM 1003-3 / SM 1022RoHS-compliant: yesPlug-in drill bushings according to DIN 173 A are precisely manufactured guide elementsthat are mainly used for drilling holes with the aid of drilling devices,
as they enable quick changes between different drill diameters. Quick-change bushings serve to guide the drill precisely, enable exact, repeatable drilling and stabilise the drill when it enters the workpiece. The bushings are usually inserted into fixtures or components via SM 1000 / SM 1001 base bushings (DIN 179/172) and secured against rotation with an inserted SM 1003-3 cylindrical pin,
which strikes against an SM 1003-1 collar screw. The main use of SM 1002-1 insert drill bushings is
for pre-drilling parts for further reaming or thread cutting operations.
Punch guide bushing - DIN 9845 C | SM 1005
From
€5.36*
incl. VAT
Diameter:
08,00
|
Form:
C
Material:Steelhardened and groundHärte: HRc 63±1RoHS-compliant: yesThe punch guide bushes in accordance with DIN 9845 C ensure the precise guidance of cutting punches in machine tools and punching tools and help to reduce wear and improve the service life of the tools.Delivery with chamfer or with centring neck on request.
Variants from €3.69*
incl. VAT
Guide bushing, conical | SM 1273-54
€13.22*
incl. VAT
Diameter 1:
10,00
|
Length 1:
12,00
|
Material:
Edelstahl/stainless_steel
without collarwith conical borefor indexing plungers SM 1273-51
Material:ST: special steelhardened (HRC 62 ±2) and groundNI: stainless steelhardened and ground
These guide bushings with conical bore will be used for the latch bore of indexing plungers SM 1273-51.
RoHS-compliant: yes
Variants from €7.47*
incl. VAT
Accessories
SUPERCRAFT Soft-face hammer | SM 3366A
€110.99*
incl. VAT
Form:
A
|
Head diameter:
70,00
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: filled with steel shotHandle: HickoryImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Robust powder coating | Inserts made of special nylon with maximum strength | Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceableThe tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Hall construction, steel construction, exhibition Positioning and joining of workpieces in the vice, sheet-metal working, assembly f sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Driving steel wedges, Maintenance / Repair / Overhaul
Variants from €34.36*
incl. VAT
SUPERCRAFT Soft-face hammer | SM 3377A
€40.85*
incl. VAT
Form:
A
|
Head diameter:
30,00
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: fi lled with steel shotHandle: steel tube and ergonomic rubber gripImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable
The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working
Variants from €38.23*
incl. VAT
