Revolving ball knob | SM 1265-1

SCHOLZ MECHANIK GmbH

Variants table
Diameter 1	Diameter 2	Material	Product number	Unit price	Buy

Product information "Revolving ball knob | SM 1265-1 "

plastic
with threaded stud

Material:
handle: plastic
phenolic resin (PF)
temperature resistant up to 110°C
black, shiny finish
thread stud/spindle:
ST: steel, zink plated, blue passivated
NI: stainless steel 1.4305/AISI 303, matt shot-blasted

threaded bolt with internal hexagon

Revolving ball knobs SM 1265-1 can be utilized instead of revolving handles i. e. with handwheels.
They have the same assembly dimensions as the handles SM 1220 (DIN 39), SM 1221 (DIN 98) and SM 1223.

RoHS-compliant: yes

Colour:	black
Compliance:	RoHS compliant
Material:	Bushing/Screw: Stainless Steel, Bushing/Screw: Steel, Knob / Handle: Plastic, Plastic, Thermoset
Speciality:	Threaded stud, rotatable, with internal hexagon
Surface:	Plastic - glossy, Stainless steel - bright, Steel - zinc plated
Type of use:	Ball knobs, Knobs

Ähnliche Artikel

Ball knob, metall - DIN 319 | SM 1265

Ball knob, metal DIN 319 Material:ST: steel polishedAL: Aluminium polishedNI: stainless steel 1.4305, matt, shot-blasted Form C: with thread, without bushForm K: with hole H7 Ball knobs DIN 319 made of steel, aluminium and stainless steel are not on the official DIN standard sheet. RoHS-compliant: yes

From €3.99* incl. VAT

Details

Ball knob, plastic - DIN 319 C | SM 1265 C

Ball knob, plastic DIN 319 C Knobs for screwing on Form C: with plastic thread, without bushing Material: knob: plastic Colours: -: black ROT: red other colours on request RoHS-compliant: yes

From €0.56* incl. VAT

Details

Ball knob, plastic - DIN 319 E | SM 1265 E

Ball knob, plastic DIN 319 E knobs screwd onForm E: with thread bush Material:knob: plasticthread bush:ST: steel, zinc platedMS: brass Colours: black, red other colours on request RoHS-compliant: yes

From €0.74* incl. VAT

Details

Ball knob, plastic - DIN 319 L | SM 1265 L

Ball knob, plastic DIN 319 L press on typeForm L: with tolerance ring Material:knob: plastictolerance ring: (form L), spring steel Colour: black other colours on request RoHS-compliant: yes The ball knobs are driven on to the shaft with light mallet blows to the ball knobs.The shaft end should have a radius or a chamfer. For ball knobs DIN 319 type L the shaft does not require a thread.

From €2.19* incl. VAT

Details

Revolving ball knob | SM 1265-02

plastic with internal thread Material:handle: plastic phenolic resin (PF) black, shiny finishtemperature resistant up to 110° Cshaft/spindle:ST: steel, zink plated, blue passivatedNI: stainless steel 1.4305/AISI 303, matt shot-blasted Use e.g. instead of rotating ball handles, where a "pulling action" is involved such as on vertically positioned handwheels. RoHS-compliant: yes

From €6.18* incl. VAT

Details

Domed gear knob | SM 1265-5

made of plasticMaterial: plastic (polyamide PA) Colors:SW = black, shiny finish, RAL 9005RT = red, shiny finish, RAL 3000CL = white, shiny finish, RAL 9002OR = orange, shiny finish, RAL 2004GR = gray, shiny finish, RAL 7040GB = yellow, shiny finish, RAL 1021BL = blue, shiny finish, RAL 5024 Form M: with threadOperating temperature -20 °C to +90 °CForm B: with hole, for knocking onOperating temperature -20 °C to +50 °CThe shaft end should be slightly rounded or chamfered (30°).These shift knobs are ergonomically shaped and are often used instead of SM 1265 ball knobs on shift levers, shift rods, etc. RoHS compliant: yes

From €1.43* incl. VAT

Details

Cylinder knob | SM 1265-3

Cylinder handlemade of plastic Material: plastic, phenolic resin (PF)with threadoperating temperature -20 °C to +110 °Cblack, shiny finish When fitting the cylinder knob, make sure that the threaded pin is long enough. Otherwise there is a risk of breakage if subjected to stress. RoHS-compliant: yes

From €1.88* incl. VAT

Details

Knob | SM 1265-6

Knob Material:ST: steel, blackenedNI: stainless steel 1.4305, matt shot-blasted Form A: without knurlForm B: with knurl Use in applications where a push or pull movement is required. Their concave top gives a more comfortable thumb grip. The knurledmodel (Type B) can be used as an attractively shaped knurled knob with a threaded blind hole. RoHS-compliant: yes

From €6.47* incl. VAT

Details

Knob - HYGIENIC DESIGN | SM 1265-7

Knob, with female thread, stainless steelHYGIENIC DESIGN Material:knob: stainless steel 1.4404 (A4) AISI 316 Lsealing ring: hydrogenated acrylonitrilebutadiene rubber (H-NBR) temperature resistant -25 °C to +150 °Chardness 85±5 Shore AFDA compliantblue PL: polished (Ra < 0,8 μm)MT: matte (Ra < 0,8 μm) These knobs from stainless steel are designed for use in hygienic areas. The sealed mounting surface enables mounting without dead spaces. The high quality finish prevents adherence of dirt and facilitate cleaning. RoHS-compliant: yes

From €18.43* incl. VAT

Details

Knob - HYGIENIC DESIGN | SM 1265-8

Knob, with threaded stud, stainless steelHYGIENIC DESIGN Material:knob: stainless steel 1.4404 (A4) AISI 316 Lsealing ring: hydrogenated acrylonitrile butadiene rubber (H-NBR) temperature resistant -25 °C to +150 °Chardness 85±5 Shore AFDA compliantblue PL: polished (Ra < 0,8 μm)MT: matte (Ra < 0,8 μm) Use in hygienic areas, sealed mounting surface enables mounting without dead spaces, high quality finish prevents adherence of dirt. RoHS-compliant: yes

From €19.71* incl. VAT

Details

Revolving ball knob | SM 1265-1

plasticwith threaded stud

plastic
with threaded stud