Nutmutter mit Gewindesicherung

Zubehör

Spanner wrench | SM 1270-12

Spanner wrench Material: steel, blackened The spanner wrench facillitates the adjustment of the SM 1270-6 until SM 1270-8. Two spanner wrenches are neccessary for routine adjustments. One for adjustment and one for counter. RoHS-compliant: yes

From €7.84* incl. VAT

Details

Ähnliche Artikel

Hexagon nut - ISO 4032/DIN 934 | SM 1291-12

Hexagon nut ISO 4032 / DIN 934 Material: ST: steel, grade 8, zinc plated NI: stainless steel The grade of a nut should always be equal or higher then the grade of the screws. This means for a screw with grade 8.8, use a nut with grade 8 or higher.* Widths across flats, external like DIN ISO 272.* Widths across flats, external like DIN ISO 272.

From €0.04* incl. VAT

Details

Hexagon nut - DIN 985 | SM 1291-121

Self-locking hexagon nut, regular type DIN 985 Material: ST: steel, zinc plated NI: stainless steel / grade 8 The grade of a nut should always be equal or higher then the grade of the screws. This means for a screw with grade 8.8, use a nut with grade 8 or higher. * Widths across flats, external like DIN ISO 272.

From €0.12* incl. VAT

Details

Hexagon nut - ISO 4035 / DIN 439 | SM 1291-122

Hexagon nut, low type ISO 4035 / DIN 439 Material: ST: steel, grade 04, zinc plated or blackened (only right-hand thread) NI: stainless steel RST: right-hand thread steel, zinc plated LST: left thread steel, zinc plated RNI: right-hand thread, stainless steel LNI: left thread, stainless steel ST: right-hand thread, steel, blackened The nuts are be used for eye joint links SM 1231 or fork joints with yokes SM 1230.

From €0.05* incl. VAT

Details

Hexagon nut, flat type | SM 1291-123

Hexagon nut, flat typefor Indexing plungers / Cam action indexing plungers Material:NI: stainless steel 1.4305ST: steel, blackened With their smaller dimensions, flat hexagon nuts SM 1291-123 expandthe mounting options of indexing plungers and cam action indexing plungers. RoHS-compliant: yes

From €0.45* incl. VAT

Details

Slotted locknut, flat | SM 1291-124

DIN 1804 (extract) Material:STU: steel, grade 5not hardenedblackenedSTH: steel, grade 5hardened HRC 60±2 (thread not hardened)Flat surfaces ground or finely turned.NIU: stainless steel 1.4305,not hardenednot ground RoHS-compliant: ja The locknuts DIN 1804 are used to adjust play or to secure in the axial direction.The stepped flat surface d3 is to be provided as a contact surface.From size M45x1.5 the locknuts have 6 grooves.Other sizes are also included in the DIN.Please use the SM 1270-12 hook wrench for assembly.

From €2.36* incl. VAT

Details

Slotted locknut, self-locking | SM 1291-125

Slotted locknut, flatwith thread locking, with Polyamide insert Material: STZ: steel, grade 5 zinc plated, blue passivated Polyamide insert (PA) temperature resistant up to 90°C RoHS-konform: ja Thread locking due to the polyamide insert. Can be used as an adjusting nut and can be used several times. The thread series corresponds for the most part to rolling bearing locknuts according to DIN 981, the supplementary dimensions are common thread sizes in machine and fixture construction.

From €1.79* incl. VAT

Details

Diameter	Material	Product number	Unit price	Buy

Product information "Slotted locknut, with thread locking | SM 1291-126"

Slotted locknut, flat
with thread locking

Material:
STZ: steel, grade 5
blackened
threaded: pin steel, burnished

RoHS-compliant: jes

Anti-rotation by means of threaded segment
cut free by means of grub screw over the thread flanks.
Damage-free mounting, possible as often as required.
Offset flat surface d3 as axial contact surface.

Element type:	Screws / Nuts
Material:	Steel