Hakenschlüssel | SM 1270-12

Zubehör

Precision leveller | SM 1270-8

Material: NI: stainless steel A1ST: steel, surface zinc plated and chromated Form A: without lock nutForm K: with lock nut For levelling, adjusting and connecting larger adjustment ranges from 15 to 55 mm.The C-Spanner SM1270-12 allows a stepless and precise setting and locking by the fine thread. A Circlip serves as a height limiter for the maximum height. Fzus = static net loadFges = total loadThe static net load Fadd is calculable after subtracing the pre-load (bolt strength class 8.8) from the total load Ftot. RoHS-compliant: yes

From €37.04* incl. VAT

Details

Slotted locknut, flat | SM 1291-124

DIN 1804 (extract) Material:STU: steel, grade 5not hardenedblackenedSTH: steel, grade 5hardened HRC 60±2 (thread not hardened)Flat surfaces ground or finely turned.NIU: stainless steel 1.4305,not hardenednot ground RoHS-compliant: ja The locknuts DIN 1804 are used to adjust play or to secure in the axial direction.The stepped flat surface d3 is to be provided as a contact surface.From size M45x1.5 the locknuts have 6 grooves.Other sizes are also included in the DIN.Please use the SM 1270-12 hook wrench for assembly.

From €2.64* incl. VAT

Details

Slotted locknut, with thread locking | SM 1291-126

Slotted locknut, flatwith thread locking Material:STZ: steel, grade 5 blackened threaded: pin steel, burnished RoHS-compliant: jes Anti-rotation by means of threaded segment cut free by means of grub screw over the thread flanks.Damage-free mounting, possible as often as required.Offset flat surface d3 as axial contact surface.

From €22.79* incl. VAT

Details

Precision adjuster | SM 1270-7

Ball head precision adjuster Material: ST: steel, surface zinc plated and chromated NI: stainless steel A1 The levelling sets are used for levelling, adjusting and linking operations. Precise installation of two non parallel planes at a required gradient up to α 4° is allowed by the spherical washers. The C-Spanner SM1270-12 allows a stepless and precise setting and locking by the fine thread. A Circlip serves as a height limiter for the maximum height. Fzus = static net loadFges = total loadThe static net load Fadd is calculable after subtracing the pre-load (bolt strength class 8.8) from the total load Ftot. RoHS-compliant: yes

From €45.40* incl. VAT

Details

Slotted locknut, self-locking | SM 1291-125

Slotted locknut, flatwith thread locking, with Polyamide insert Material: STZ: steel, grade 5 zinc plated, blue passivated Polyamide insert (PA) temperature resistant up to 90°C RoHS-konform: ja Thread locking due to the polyamide insert. Can be used as an adjusting nut and can be used several times. The thread series corresponds for the most part to rolling bearing locknuts according to DIN 981, the supplementary dimensions are common thread sizes in machine and fixture construction.

From €1.95* incl. VAT

Details

Levelling adjuster | SM 1270-6

Material:NI: stainless steel A1ST: steel, surface zinc plated and chromated If small dimensions are given, the levelling sets are used for levelling, adjusting and linking operations. The C-Spanner SM1270-12 allows a stepless and precise setting and locking by the fine thread.A Circlip serves as a height limiter for the maximum height. Fzus = static net loadFges = total loadThe static net load Fadd is calculable after subtracing the pre-load (bolt strength class 8.8) from the total load Ftot. RoHS-compliant: yes

From €30.84* incl. VAT

Details

Variants table
Type	Product number	Unit price	Buy

Product information "Spanner wrench | SM 1270-12 "

Spanner wrench

Material: steel, blackened

The spanner wrench facillitates the adjustment of the SM 1270-6 until SM 1270-8.
Two spanner wrenches are neccessary for routine adjustments.
One for adjustment and one for counter.

RoHS-compliant: yes

Material:	Steel
Typ 9:	Wrench / Mandrel / Pin puller