Socket key - HYGIENIC DESIGN | SM 1268-4S

SCHOLZ MECHANIK GmbH

from €4.03*

€4.03*

Prices incl. VAT plus shipping costs

Available in 5 days

This product is available in 2 versions.

Width across flats

09,00

13,00

To create an offer for this item, please add it to your shopping cart. From there you can create the quote with all the necessary details.

Product number: 249635

Description Datasheet

Variants table
Width across flats	Product number	Unit price	Buy

Product information "Socket key - HYGIENIC DESIGN | SM 1268-4S "

Socket key
HYGIENIC DESIGN

Material:
Plastic thermoplastic (Polyamide PA)
glass fiber reinforced
blue

for latches in Hygienic Design SM 1268-4 und SM 1268-5
with Hole d2 for loss prevention

RoHS-konform: ja

Material:	Plastic
Typ 9:	Wrench / Mandrel / Pin puller

Zubehör

Latch - HYGIENIC DESIGN | SM 1268-5

Latch, stainless steelOperating Side and Latch Arm Side HYGIENIC DESIGN (Full Hygiene) Material:Closure housing: stainless steel 1.4404 (A4)Bolt: stainless steel 1.4408other parts: stainless steel 1.4404 (A4) Seals: bluetemperature resistant -40 °C to +110 °C FDA-compliant Sealing rings: EPDM, hardness 85 ±5 Shore AO-ring: EPDM, hardness 70 ±5 Shore AOther seals / wipers: TPU, hardness 95 ±5 Shore A All moving parts lubricated with FDA-compliant special grease.Protection class IP 66 RoHS-compliant: yes Hygienic DesignThese laches are intended for use in hygienic areas and meet hygiene requirements on the actuating and latch side (full hygiene) due to the special fastening nut as well as the optimised latch and hexagonal screw. Several seals keep the locking mechanism tight. At the same time, the high surface quality (Ra < 0.8 μm) and the fastening without dead space prevent dirt from adhering and facilitate cleaning. The latches create a secure closure by rotating a maximum of 90°, which positions the latch arm in the locked position behind the frame. A latch spacing g of 22 to 44 mm can be covered by different cranked latches.For the sealing rings to function reliably, the mounting holes on the housing must be right-angled, burr-free and without chamfer. Delivery: loosely enclosed latch arm. Mounting instructionsThe lock housing is inserted from the front through the mounting hole and screwed on from the rear with the fastening nut.The bolt is fastened with the hexagon head

From €131.53* incl. VAT

Details

Latch - HYGIENIC DESIGN | SM 1268-4

Latch, stainless steelOperating Side HYGIENIC DESIGN (Front Hygiene) Material:Closure housing: stainless steel 1.4404 (A4)Bolt: stainless steel- 1.4301 / AISI 304 for d1 = 22- 1.4404 / AISI 316L for d1 = 30other parts: stainless steel 1.4404 (A4) Seals: bluetemperature resistant -40 °C to +110 °C FDA-compliant Sealing rings: EPDM, hardness 85 ±5 Shore AO-ring: EPDM, hardness 70 ±5 Shore AOther seals / wipers: TPU, hardness 95 ±5 Shore A All moving parts lubricated with FDA-compliant special grease.Protection class IP 66 RoHS-compliant: yes Hygienic DesignThese laches are intended for use in hygienic areas and meet hygiene requirements on the operating side (front hygiene). Two seals keep the locking mechanism tight. At the same time, the high surface quality (Ra < 0.8 μm) and the fastening without dead space prevent dirt from adhering and facilitate cleaning. The latches lock by means of an actuation rotation limited to 90°.A latch spacing g of 6 to 28 mm can be covered by different cranked latches. For the sealing rings to function reliably, the mounting holes on the housing must be right-angled, burr-free and without chamfer. Delivery: loosely enclosed latch arm. Mounting instructionsThe lock housing is inserted from the front through the mounting hole and screwed on from the rear with the fastening nut. The bolt is fastened with the hexagon head screw.

From €31.34* incl. VAT

Details