Location unit total partcompleteMaterial: special steelhardened and groundConsisting of
centring bush part A and
centring bush part B
RoHS-compliant: yes
with threaded stemMaterial:heat-treated steelunhardenedblackened
Support surface without centre.Used in fixture construction as a base or as a support element and stop.
RoHS-compliant: yes
Seating pin, headed dowelcylindrical
Material: ST: tool steel, hardened, groundNI: stainless steel 1.4112, hardened
Form A: cylindrical,bearing surface without center.Can be used as support, stops and feet.Form B: cylindrical,for positioning in bores with fitting dimension, can also be used as stops and feet.Support surface with center permissible in accordance with DIN 6321 .Form C: cylindrical, flattenedfor bridging tolerances in the distance between two holesor for fixing parts to be positioned in one direction only.Support surface with center permissible in accordance with DIN 6321 .
RoHS-compliant: yes
Support bolt with bore hole, screwablesim. to DIN 6321
Material: Case-hardened steel, case-hardened, burnished and ground
Form B: screw-on locating bolt,
cylindrical
Form C: screw-on locating bolt,
flattened
The cylindrical locating bolts (shape B) for positioning in holes with fitting dimensions and can also be used as stops and feet.Flattened locating pins (shape C) are used to compensate for tolerances in the distance between two holes or to fix parts to be positioned in one direction only.
Additional safety through fastening options from above and below (can also be used for disassembly).Size 6 can only be mounted from the top.External dimensions are similar to DIN 6321.
RoHS-compliant: yes
changeablecylindricalForm A and C
Material: tool steelhardened and ground
Form A: cylindricalForm C: cylindrical, flattened
RoHS-compliant: yes
see alsoLocating pin, changeable | SM 1280-5 B/CDForm B: cylindrical, steppedForm D: cylindrical, stepped, flattened
changeablecylindrical, steppedForm B and D
Material: tool steelhardened and ground
Form B: cylindrical, steppedForm D: cylindrical, stepped, flattened
RoHS-compliant: yes
see alsoLocating pin, changeable | SM 1280-5 A/CForm A: cylindricalForm C: cylindrical, flattened
with ball end Form B - stepped cylindrical
Material: ST: tool steelhardened and groundNI: stainless steelhardened and ground
Ball ended straight pins facilitate inserting work pieces and avoid clamping inclination.
RoHS-compliant: yes
with flattened ball endForm C - not stepped
Material:ST: tool steelhardened and groundNI: stainless steelhardened and ground
Ball ended straight pins facilitate inserting work pieces and avoid clamping inclination.
RoHS-compliant: yes
with flattened ball end Form D - stepped
Material: ST: tool steelhardened and groundNI: stainless steelhardened and ground
Ball ended straight pins facilitate inserting work pieces and avoid clamping inclination.
RoHS-compliance: yes
Location unit single part A
Material: special steel
hardened and ground
Part A is produced with a cylindrical descend for the fillister head cap screw SM 1291-01. Accordingly it is possible to screw part A from the beginning without disassembling the tools.
RoHS-compliant: yes
cylindrically
Material: tool steelhardened
Form A: ground to ISO tolerance g6Form B: not ground, with 0,5 mm additional
plan surfaces with centering
RoHS-compliant: yes
flattened
Material: tool steel, hardened
Form A: ground to ISO tolerance g6Form B: not ground, with 0,5 mm additional
plan surface with centering
RoHS-compliant: yes
