Domed gear knob | SM 1265-5

SCHOLZ MECHANIK GmbH

Variants table
Colour	Diameter 1	Diameter 2 / Diameter 3	Product number	Unit price	Buy

Product information "Domed gear knob | SM 1265-5"

made of plastic

Material:
plastic (polyamide PA)

Colors:
SW = black, shiny finish, RAL 9005
RT = red, shiny finish, RAL 3000
CL = white, shiny finish, RAL 9002
OR = orange, shiny finish, RAL 2004
GR = gray, shiny finish, RAL 7040
GB = yellow, shiny finish, RAL 1021
BL = blue, shiny finish, RAL 5024

Form M: with thread
Operating temperature -20 °C to +90 °C
Form B: with hole, for knocking on
Operating temperature -20 °C to +50 °C
The shaft end should be slightly rounded or chamfered (30°).

These shift knobs are ergonomically shaped and are often used instead of SM 1265 ball knobs on shift levers, shift rods, etc.

RoHS compliant: yes

Colour:	black, blue, grey, orange, red, white, yellow
Compliance:	RoHS compliant
Material:	Knob / Handle: Plastic, Plastic, Thermoplastic
Speciality:	Lever straight, With bore hole
Surface:	Plastic - glossy
Type of use:	Knobs

Similar Items

Ball knob, metall - DIN 319 | SM 1265

Ball knob, metal DIN 319 Material:ST: steel polishedAL: Aluminium polishedNI: stainless steel 1.4305, matt, shot-blasted Form C: with thread, without bushForm K: with hole H7 Ball knobs DIN 319 made of steel, aluminium and stainless steel are not on the official DIN standard sheet. RoHS-compliant: yes

From €3.99* incl. VAT

Details

Ball knob, plastic - DIN 319 E | SM 1265 E

Ball knob, plastic DIN 319 E knobs screwd onForm E: with thread bush Material:knob: plasticthread bush:ST: steel, zinc platedMS: brass Colours: black, red other colours on request RoHS-compliant: yes

From €0.74* incl. VAT

Details

Revolving ball knob | SM 1265-1

plasticwith threaded stud Material:handle: plastic phenolic resin (PF) temperature resistant up to 110°Cblack, shiny finishthread stud/spindle:ST: steel, zink plated, blue passivatedNI: stainless steel 1.4305/AISI 303, matt shot-blasted threaded bolt with internal hexagon Revolving ball knobs SM 1265-1 can be utilized instead of revolving handles i. e. with handwheels. They have the same assembly dimensions as the handles SM 1220 (DIN 39), SM 1221 (DIN 98) and SM 1223. RoHS-compliant: yes

From €6.02* incl. VAT

Details

Revolving ball knob | SM 1265-02

plastic with internal thread Material:handle: plastic phenolic resin (PF) black, shiny finishtemperature resistant up to 110° Cshaft/spindle:ST: steel, zink plated, blue passivatedNI: stainless steel 1.4305/AISI 303, matt shot-blasted Use e.g. instead of rotating ball handles, where a "pulling action" is involved such as on vertically positioned handwheels. RoHS-compliant: yes

From €6.18* incl. VAT

Details

Plug-on handle | SM 1266-1

Plastic gripelliptical shaped knob Material: plastic, phenolic resin (PF)temperature resistant up to 110° Cblack, shiny finish Form C: plastic threadThese ergonomically shaped handles are also used instead of ball knobs on gear levers, gear rods, etc. It is important to ensure that the threaded pin is not too short. Otherwise, there is a risk of the thermoset plastic body breaking under corresponding stress. RoHS-compliant: yes

From €1.61* incl. VAT

Details

Taper knob | SM 1267-1

Cone handlefrom plastic Material: plastic, phenolic resin (PF)with thread temperature resistant up to 110° Cblack, shiny finish Conical knobs are used for switching and operating, e.g. also instead of ball knobs, on shift levers, shift rods, etc. Made of phenolic resin, they have good resistance to chemical influences. RoHS-compliant: yes

From €1.30* incl. VAT

Details