Renewable drill bushing - DIN 173 A | SM 1002-1
from €19.22*
| Quantity | Unit price |
|---|---|
| To 4 |
€64.01*
|
| To 9 |
€41.61*
|
| To 49 |
€38.40*
|
| To 99 |
€25.61*
|
| From 100 |
€19.22*
|
Delivery time: 1-3 days working days
Delivery time: See variant in the table
This product is available in 1180 versions.
Product information "Renewable drill bushing - DIN 173 A | SM 1002-1"
Quick-change bushing
DIN 173 A Sheet 1
Material: special steel
hardened and ground
hardness: HRc 63±1
hardened and ground
hardness: HRc 63±1
Basic bushings for this: Drill bushings SM 1000, 1000-1, 1000-2 and 1001.
collar screws: SM 1003-1
dowel pins: SM 1003-3 / SM 1022
collar screws: SM 1003-1
dowel pins: SM 1003-3 / SM 1022
RoHS-compliant: yes
Plug-in drill bushings according to DIN 173 A are precisely manufactured guide elements
that are mainly used for drilling holes with the aid of drilling devices,
as they enable quick changes between different drill diameters.
Plug-in drill bushings according to DIN 173 A are precisely manufactured guide elements
that are mainly used for drilling holes with the aid of drilling devices,
as they enable quick changes between different drill diameters.
Quick-change bushings serve to guide the drill precisely, enable exact, repeatable drilling and stabilise the drill when it enters the workpiece.
The bushings are usually inserted into fixtures or components via SM 1000 / SM 1001 base bushings (DIN 179/172)
and secured against rotation with an inserted SM 1003-3 cylindrical pin,
which strikes against an SM 1003-1 collar screw.
and secured against rotation with an inserted SM 1003-3 cylindrical pin,
which strikes against an SM 1003-1 collar screw.
The main use of SM 1002-1 insert drill bushings is
for pre-drilling parts for further reaming or thread cutting operations.
| DIN / ISO: | DIN 173 A |
|---|---|
| Material: | Steel - hardened |
| Speciality: | with cordel |
| Surface: | grinded |
| Type: | Plug-in drill bushings |
Accessories
CAD Data
Collar screw - sim. to DIN 173 | SM 1003-1
From
€3.62*
incl. VAT
similar to DIN 173 Sheet 1
Material: SteelSurface: zinc plated
RoHS-compliant: yes
Note:for renewable bushes SM 1002-1in the table:
d6 = diameter
Parallel pin- DIN 7 | SM 1022
From
€0.11*
incl. VAT
Dowel pinnormal form m6
Material: ST: steel, unhardenedA1: stainless steel A1, unhardenedA4: stainless steel A4, unhardened
Ground and lapped to ISO tolerance m6, round ends are turned.
RoHS-compliant: yesThe cylindrical, unhardened and precision-ground SM 1022 dowel pins with domes in accordance with DIN 7, made of steel or stainless steel, are widely used, for example, in mechanical engineering for the exact positioning and fixing of components. Typical applications include the fixing of gears, bearings and other machine elements.
SUPERCRAFT Soft-face hammer | SM 3366A
From
€34.36*
incl. VAT
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: filled with steel shotHandle: HickoryImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Robust powder coating | Inserts made of special nylon with maximum strength | Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceableThe tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Hall construction, steel construction, exhibition Positioning and joining of workpieces in the vice, sheet-metal working, assembly f sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Driving steel wedges, Maintenance / Repair / Overhaul
SUPERCRAFT Soft-face hammer | SM 3377A
From
€38.23*
incl. VAT
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: fi lled with steel shotHandle: steel tube and ergonomic rubber gripImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable
The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working
Similar Items
CAD Data
Renewable drill bushing - DIN 173 E/ER/ES | SM 1002-2
€62.49*
incl. VAT
Replaceable bushing or Quick-release bushingDIN 173 E/ER/ES Part 2
Material: special steelhardened and groundHardness: HRc 63±1
Form E: quick release drill bushingForm ES: with stop pinForm ER: with stop pin and insertion groove
These renewable drill bushings fit only with basic bushes SM 1002-3 form G or form H.
fixing screws: SM 1003-2dowel pins: SM 1003-3
RoHS-compliant: yes
Plug-in drill bushings according to DIN 173 E / ES / ER Part 2
are precisely manufactured guide elements that are mainly used for drilling holes with the aid of drilling devices,
as they enable quick changes between different drill diameters.
Replaceable bushings or quick-change bushings with stop pins are used to
guide the drill precisely and enable accurate, repeatable drilling
and to stabilise the drill when it enters the workpiece.The bushings are usually inserted into fixtures or components via base bushings SM 1002-2 G / H and secured against rotation with SM 1003-2 collar screws as bayonet locks.
An inserted SM 1003-3 cylindrical pin, which strikes against an SM 1003-2 collar screw,
acts as an additional anti-rotation device.The main use of SM 1002-2 plug-in drill bushings is
for pre-drilling parts for further reaming or thread cutting operations.
Variants from €18.74*
incl. VAT
