Knurled drill bushing - sim. to DIN 179 | SM 1000-1
Price on request
Available in 28 days
Delivery time: See variant in the table
This product is available in 1463 versions.
Product information "Knurled drill bushing - sim. to DIN 179 | SM 1000-1"
similar to SM 1000 - DIN 179
Material: Special steel
hardened and ground
Hardness: HRc 63±1
Form A: with one radius
Form B: with two radiuses
RoHS-compliant: yes
With cording and adhesive grooves for a secure hold in the bonding point.
| DIN / ISO: | DIN 179 and similar |
|---|---|
| Material: | Steel - hardened |
| Speciality: | with adhesive grooves, with cordel |
| Type: | Drill bushings, cylindrical, Knurled bushings / cordel bushings |
CAD data
Accessory Items
SUPERCRAFT Soft-face hammer | SM 3366A
From
€34.36*
incl. VAT
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: filled with steel shotHandle: HickoryImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Robust powder coating | Inserts made of special nylon with maximum strength | Vibration-dampening, ergonomically shaped, very stable and varnished hickory handle | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceableThe tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Hall construction, steel construction, exhibition Positioning and joining of workpieces in the vice, sheet-metal working, assembly f sharp-edged workpieces, assembly and repair work in the automotive and truck sector, Scaffold and tent construction, Hall, steel and exhibition stand construction, Concrete formwork, straightening work, housing assembly, plant construction, Driving steel wedges, Maintenance / Repair / Overhaul
SUPERCRAFT Soft-face hammer | SM 3377A
From
€38.23*
incl. VAT
SUPERCRAFT Soft-face hammer with vibration-reducing
Tubular head: fi lled with steel shotHandle: steel tube and ergonomic rubber gripImpact inserts: Nylon, white
Note:Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable
The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.
Application Areas:Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working
Similar Items
CAD Data
Drill bushing - DIN 179 A | SM 1000 A
From
€13.47*
incl. VAT
Form:
A
|
Inside Diameter:
00,50
|
Length:
06,00
|
Outside Diameter:
03,00
Positioning bushDIN 179 / ISO 4247 Form Acylindrical, hardened
Material: Special steelhardened and groundHardness: HRc 63±1
Form A: with one radius without grooves Form B: with two radiuses without grooves you will find as an extra article Drill bushing DIN 179 B | SM 1000 B
RoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7. For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.
Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
on request
Form CA: with one radius, additionally with grooves for gluingForm CB: with two radiuses, additionally with grooves for gluingForm CVA: with one radius, additionally with grooves fand locking device
Form CVB: with two radiuses, additionally with grooves fand locking device
Variants from €1.42*
incl. VAT
CAD Data
Drill bushing - DIN 179 B | SM 1000 B
From
€9.26*
incl. VAT
Form:
B
|
Inside Diameter:
00,90
|
Length:
09,00
|
Outside Diameter:
03,00
Positioning bushDIN 179 / ISO 4247 Form Bcylindrical, hardened
Material: Special steel hardened and ground Hardness: HRc 63±1
Form B: with two radiuses without grooves
Form A: with one radius without grooves
you will find as an extra article Drill bushing DIN 179 A | SM 1000 ARoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7. For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly: the drill diameter should correspond to the bushing diameter, press in the bushing angular with a flat mandrel.
on request
Form CA: with one radius, additionally with grooves for gluing
Form CB: with two radiuses, additionally with grooves for gluing
Form CVA:
with one radius, additionally with grooves and locking device
Form CVB: with two radiuses, additionally with grooves and locking device
Variants from €1.57*
incl. VAT
CAD Data
Drill bushing F7, through hardened - sim. to DIN 179 | SM 1000D
€37.91*
incl. VAT
Positioning bushingsim. to DIN 179 / ISO 4247 cylindrical, through hardened
Material: Tool steelhardened and groundHardness: through hardened to HRc 63±1Form A: with one radius Form B: with two radiusesRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
Variants from €5.68*
incl. VAT
CAD Data
Drill bushing F7, stainless steel - sim. to DIN 179 | SM 1000N
€34.27*
incl. VAT
Positioning bushing sim. to DIN 179 / ISO 4247 cylindrical, made of stainless steelMaterial: Stainless steel 1.4112hardened and groundHardness: HRc 56±1Form A: with one radius Form B: with two radiusesRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.
Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
Variants from €4.81*
incl. VAT
CAD Data
Drill bushing F7, carbide - sim. to DIN 179 | SM 1000-02
Positioning bushingsim. to DIN 179 / ISO 4247cylindrical, CarbideMaterial: CarbideHardness: about 90 HRASurface: groundForm A: with one radius Form B: with two radiuses
RoHS-compliant: yesDrill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - drill bushes can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Due to their high hardness and tight tolerances, a very high repeat accuracy and long service life can be guaranteed.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.
Price on request
CAD Data
Knurled bushing F7 | SM 1000-3
€4.01*
incl. VAT
Material: Special steelhardened and groundHardness: HRc 63±1Form A: with one radius without adhesive grooves
Form B: with two radii without adhesive grooves
RoHS-compliant: yes
Particularly suitable for mounting in aluminium,
plastic or wood materials by pressing in or gluing.On request:
Form CA: with adhesive grooves and one radius
Form CB: with adhesive grooves and two radii
Suitable for 3D-printed components to achieve functional surfaces.
Variants from €2.80*
incl. VAT
