Guide bushing, conical | SM 1273-55

SCHOLZ MECHANIK GmbH

from €12.71*

€20.28*

Prices incl. VAT plus shipping costs

Available in 70 days

Delivery time: See variant in the table

This product is available in 4 versions.

Show all variants

Diameter 1

06,00

08,00

10,00

Length 1

08,00

10,00

12,00

Material

Edelstahl/stainless_steel

Stahl/steel

Product number: 241115

Description Datasheet

Diameter 1	Length 1	Material	Product number	Unit price	Buy

Product information "Guide bushing, conical | SM 1273-55"

with collar
with conical bore
for indexing plungers SM 1273-51

Material:
ST: special steel
hardened (HRC 62 ±2) and ground
NI: stainless steel
hardened and ground

The positioning bushings SM 1273-54 and SM 1273-55 with conical bore are used for
the detent bore of indexing plungers SM 1273-51 and allow precise positioning.
The length l7 of the indexing pin is determined by the depth of penetration of the indexing
pin into the cone of the bushing.
The length l8 must ensure complete disengagement of the indexing pin.
When engaged, the pin must have at least 0.5 mm residual stroke so that the conical part of the pin is seated in the cone of the positioning bush without play.
To accommodate the positioning bushings (outer Ø with tolerance n6), the locating holes hould have tolerance H7.

RoHS-compliant: yes

Compliance:	RoHS compliant
Material:	Stainless steel, Steel
Speciality:	Bore - conical
Surface:	bright, slide ground
Type of use:	Bushings, Indexing plunger / indexing pin

Accessories

Indexing plunger for screwing on | SM 1273-51

Indexing plunger for screwing on, plunger pin conicalfor precision locating Material:steel, blackenedplunger: hardened and groundknob: black plastic (Polyamide PA), matt finish, not removable Form B: without rest positionForm C: with rest position, knob is turned 90° Indexing plungers SM 1273-51, together with guide bushings SM 1002 and SM 1273-55 /sim. to DIN 172 and SM 1002 or SM 1273-54 / sim. to DIN 179 enable precise positioning.The bushings are used to guide the plunger pin as well as for the indexing bore. Larger guide lengths further increase the precision.Two different plunger pin lengths l1 are available for each indexing plunger diameter d1.The length l7 is determined by the penetration depth of the plunger pin into the cone of the bushing. The length l8 must ensure that the plunger pin fully disengages, bushing length and plate thickness plus any gap can then be selected within certain margins.If engaged, the pin must have a minimum remaining stroke of 0,5 mm to make sure that the conical section of the pin is located without clearance in the cone of the guide bushing. For a safe remaining stroke length: l9 = l1 - 0,5 mm.To accommodate the positioning bushings (outer Ø with tolerance n6), a locating holewith tolerance H7 is usually provided. Type C is used for such applications where the plunger has to stay in its retracted position.To achieve this, the knob is rotated by 90° degrees after being retracted.A notch keeps the plunger in this position. RoHS-compliant: yes

From €33.31* incl. VAT

Details

Similar Items

CAD Data

Drill bushing F7, stainless steel - sim. to DIN 172 | SM 1001N

Positioning bush with collar stainless steel similar to DIN 172 / ISO 4247:1977 Material: Stainless steel 1.4112hardened and groundHardness: HRc 56±1 Form A: with one radius without groovesForm B: with two radiuses without grooves RoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.

Price on request

Details

CAD Data

Drill bushing F7, carbide - sim. to DIN 172 | SM 1001-02

Drill bushing F7 with collar carbidesim. to DIN 172 / ISO 4247 Material: CarbideSurface: groundHardness: about 90 HRA Form A: with one radius Form B: with two radiuses RoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc. Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.

Variants from €67.20* incl. VAT

€100.31* incl. VAT

Details

Guide bushing, conical | SM 1273-54

without collarwith conical borefor indexing plungers SM 1273-51 Material:ST: special steelhardened (HRC 62 ±2) and groundNI: stainless steelhardened and ground These guide bushings with conical bore will be used for the latch bore of indexing plungers SM 1273-51. RoHS-compliant: yes

From €7.02* incl. VAT

Details

Guide bushing, conical | SM 1273-55

with collar with conical bore for indexing plungers SM 1273-51

with collar
with conical bore
for indexing plungers SM 1273-51