Leveling pad, anti-slip | SM 1270-2 AC
from €11.54*
€11.54*
Available in 5 days
Available in 5 days
This product is available in 21 versions.
Product information "Leveling pad, anti-slip | SM 1270-2 AC"
with ball element and rubber cap
Material:
Form AC:
ball bearing: heat-treated steel, tempered, blackened
pad: heat-treated steel, tempered, blackened
Form AC:
ball bearing: heat-treated steel, tempered, blackened
pad: heat-treated steel, tempered, blackened
Form CDN:
ball bearing: stainless steel 1.4305
pad: Thermoplast (POM), white
Form CNI:
ball bearing: stainless steel 1.4305
pad: stainless steel 1.4305
ball bearing: stainless steel 1.4305
pad: Thermoplast (POM), white
Form CNI:
ball bearing: stainless steel 1.4305
pad: stainless steel 1.4305
Form C: with rubber cap for anti slip
RoHS-compliant: yes
Use as adjustable foot and thrust piece.
Non-parallel bearing surfaces up to max. 15° degrees can be compensated.
The plastic cap on the joint plate prevents slipping.
Non-parallel bearing surfaces up to max. 15° degrees can be compensated.
The plastic cap on the joint plate prevents slipping.
The static load capacity is limited by the permissible load capacity of the joint ball.
The values in the tables assume are based on a pure compressive load perpendicular to the joint foot.
Bending/ buckling loads lead to a reduction in the load capacity and must be taken into account accordingly.
The values in the tables assume are based on a pure compressive load perpendicular to the joint foot.
Bending/ buckling loads lead to a reduction in the load capacity and must be taken into account accordingly.
| Compliance: | RoHS compliant |
|---|---|
| Element type: | Articulated foot, Joint pieces, Joint plate |
| Material: | Bushing/Screw: Stainless Steel, Bushing/Screw: Steel, Cap: rubber, Plate: plastic POM, Plate: stainless steel, Plate: steel |
| Speciality: | With plastic cap |
Similar Items
Leveling pad | SM 1270-2 A
From
€10.07*
incl. VAT
Jointed plate
Material:Form A: ball bearing: heat-treated blackened pad: steelForm DN: ball bearing: stainless steel pad: Thermoplast (POM)Form NI: ball bearing: stainless steel pad: stainless steel
Use as feet and pressure pieces.They can be connected with most types of screws.Non-parallel contact surfaces up to max. 15° degrees can be levelled out.Temperature application range thermoplastic version from - 30 °C to + 80 °C.
RoHS-compliant: yes
Leveling pad, bolt | SM 1270-2 B
From
€18.06*
incl. VAT
with bolt and ball element
Material:Form B: ball element with bolt: heat-treated blackened pad: steelForm BDN: ball element with bolt: stainless steel pad: Thermoplast (POM)Form BNI: ball element with bolt: stainless steel pad: stainless steel
To be used as feet and thrust pads.Non-parallel contact surfaces up to max. 15° degrees can be levelled out.Temperature application range thermoplastic version from - 30 °C to + 80 °C.
RoHS-compliant: yes
Leveling pad with bolt, anti-slip | SM 1270-2 BC
From
€19.54*
incl. VAT
with bolt, ball element and rubber capas anti-slip deviceMaterial:Form BC: ball bearing with bolt: heat-treated steel, tempered, blackenedpad: heat-treated steel, tempered, blackenedForm BCDN: ball bearing with bolt: stainless steel 1.4305pad: Thermoplast (POM), whiteForm BCNI: ball bearing with bolt: stainless steel 1.4305pad: stainless steel 1.4305Form C: with rubber cap for anti slipRoHS-compliant: yesUse as adjustable foot and thrust pieceNon-parallel bearing surfaces up to max. 15° degrees can be compensated.The plastic cover on the mounting pad prevents slipping.The static load capacity is limited by the permissible load capacity of the joint ball. The values in the tables assume are based on a pure compressive load perpendicular to the joint foot. Bending/ buckling loads lead to a reduction in the load capacity and must be taken into account accordingly.
Hexagon collar nut | SM 1270-31
From
€17.59*
incl. VAT
with conical seatwith large surfaceMaterial: heat-treated steel, temperedblackenedRoHS-compliant: yesThe hexagon nut with conical socket is a firmly connected unit consisting of a hexagon nut and conical socket,which can be used to compensate for non-parallel clamping surfaces with a swivelling range of up to max. 3°.
The nut and ball socket are captively connected to each other.
Pivot bolt | SM 1242
From
€1.98*
incl. VAT
Ball jointed levelling feetMaterial:ST: thrust pad: plastic (POM)black, matttemperature resist. up to 80 °Cthreaded stud: steel, blackened tensile strength 500 N/mm2NI: thrust pad: plastic (POM)temperature resist. up to 80 °Cthreaded stud: stainless steel 1.4305NV: thrust pad: stainless steel 1.4305O-Ring: rubber FPMtemperature resist. up to 200 °Cthreaded stud: stainless steel 1.4305Ball diameter smaller than the core diameter of the thread,
so ball-side screwing in is also possible.
Stainless steel thrust piece with O-ring. The data on the static load capacity of the plastic pressure pieces are guide values
and were determined by a series of tests. The thrust piece was loaded vertically via the grub screw. At the measured load of 3,5 kN there was no remaining deformation visible on the thrust pad nor was there any breakage.RoHS-compliant: yesSM 1242 swivel joints are used for setting up and levelling appliances and devices or for pressing and clamping.
The plastic thrust piece prevents damage to sensitive surfaces, while the stainless steel version can also be used in more aggressive environments thanks to the materials used.
Levelling foot | SM 3050
From
€6.50*
incl. VAT
with steel spindle and plastic baseMaterial:foot: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant up to 100° black, matt threaded stud: steel, grade 5.8zinc plated, blue passivatedhexagon nut: steelzinc plated, blue passivatedrubber underlay: NBR 70 Shore hardnessblackForm A: without nut, without rubber underlayForm B: with nut, without rubber underlayForm C: without nut, with rubber underlay
Form D: with nut, with rubber underlayhigh static load capacity due to high-quality plasticand slightly stepped shape.Load distribution through ribbing over a large area.Articulated feet are supplied assembled, but can be dismantled.
Data on static load capacity are approximate values under exclusion of any liability for possible consequential damage when using the swivel feet.If the values are exceeded, permanent deformation or breakage of the plastic plate is possible.The values were determined by means of a series of tests in which a limited number of articulated feet were loaded for a limited time with a static force acting perpendicular to the plate.The suitability of the leveling feet for the respective application must be determined by the user.RoHS-compliant: yes
Levelling foot, stainless steel | SM 3051
From
€10.38*
incl. VAT
with stainless steel spindle and plastic baseMaterial: foot: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant up to 100° Cblack, mattthreaded stud: stainless steel, 1.4305hexagon nut: stainless steel , 1.4301rubber underlay: NBR 70 Shore hardnessblackForm A: without nut, without rubber underlayForm B: with nut, without rubber underlayForm C: without nut, with rubber underlayForm D: with nut, with rubber underlayhigh static load capacity due to high-quality plasticand slightly stepped shape,Load distribution through ribbing over a large area.Articulated feet are supplied assembled, but can be dismantled.Data on static load capacity are approximate values under exclusion of any liabilityfor possible consequential damage when using the swivel feet.If the values are exceeded, permanent deformation or breakage of the plastic plate is possible.The values were determined by means of a series of tests in which a limited number of articulated feetwere loaded for a limited time with a static force acting perpendicular to the plate.The suitability of the leveling feet for the respective application must be determined by the user.RoHS-compliant: yes
Levelling foot | SM 3060
From
€4.22*
incl. VAT
with steel spindle and plastic base
Material:foot: plastic Technopolymer (PA)glass fibre reinforcedblack, matttemperature resistant up to 100° Cthreaded stud: steel, tensile strength class 5.8zinc plated, blue passivatedhexagon nut: steel ISO 4032zinc plated, blue passivatedrubber pad: (NBR) 70 Shoreblack
Form B: with nut, without rubber padForm D: with nut, with rubber pad
Levelling feet are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.Levelling feet are supplied assembled, but are removable.
Information:If the values of the static load capacity given in the table are exceeded, the plastic foot plate may break. The values were determined by a series of tests in which a limited number of articulated feet were subjected to a static force acting perpendicular to the foot plate for a limited time. Depending on the application and load case, however, a safety factor must be taken into account so that the permissible load capacity is lower than the value given in the table.
RoHS-compliant: yes
Levelling foot, thread stud | SM 3061
From
€6.91*
incl. VAT
with stainless steel spindle and plastic base
Material:foot: plastic Technopolymer (PA)glass fibre reinforcedblack, matttemperature resistant up to 100° Cthreaded stud: stainless steel AISI 303hexagon nut: steel ISO 4032, stainless steel AISI 304rubber pad: (NBR) 70 Shore, black
Form B: with nut, without rubber padForm D: with nut, with rubber pad
Levelling feet are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.Levelling feet are supplied assembled, but are removable.
Information:If the values of the static load capacity given in the table are exceeded, the plastic foot plate may break. The values were determined by a series of tests in which a limited number of articulated feet were subjected to a static force acting perpendicular to the foot plate for a limited time.Depending on the application and load case, however, a safety factor must be taken into account so that the permissible load capacity is lower than the value given in the table.
RoHS-compliant: yes
Levelling foot, stainless steel | SM 3105
From
€6.18*
incl. VAT
Levelling foot, stainless steel
Material: foot: stainless steel No. 1.4301matt shot-blastedscrew: stainless steel, 1.4305hexagon nut: ISO 4032, 1.4305assembly screw.: stainless steeloctitedplastic cap: Elastomer (TPE) 80 Shorerubber underlay: (NBR) 70±5 Shore, black vulcanized
Form OS: without rubber cap, with nutForm KR: with rubber underlay clipped on, with nutForm GV: with rubber underlay vulkanized, with nut
The levelling feet can be used in some combinations of base plates and adjustable spindle versions.Screw versions M08/M10/M12 with external hexagon SW1. Screw versions M16/M20/M24 with hexagon socket at the top and wrench flat SW2 at the bottom. The base plate with the rubber underlay protects sensitive surfaces and reduces lateral slippage. The levelling feet are supplied fully assembled and are not removable.
RoHS-compliant: yes
Levelling foot - HYGIENIC DESIGN | SM 3150
From
€111.54*
incl. VAT
made of stainless steelwith adjustment sleeve
Material:foot plate: stainless steel 1.4301 (AISI 304), turnedspindle: stainless steel 1.4301 (AISI 304), turnedadjustable sleeve: stainless steel 1.4301 (AISI 304), turnedseals: blue, FDA compliant
Hardness:- sealing ring: NBR, hardness 70 ±5 Shore A- wiper: TPU, hardness 95 ±5 Shore A- joint sealing ring: H-NBR, hardness 85 ±5 Shore A- bottom seal: Silikon, hardness 85 ±5 Shore A
Form A: without boreForm B: with bore
These adjustable feet are certified according to the guidelines of 3-A Sanitary Standards,
Inc. and DGUV Testand the adjustable feet Form B with fixing holes are also certified
according to EHEDG and are therefore particularly suitable for use in hygienic areas.The bottom seal protects the area beneath the foot plate from dirt. For this, the foot
must be screwed on using the mounting holes and compressed accordingly. The
sealing ring above the adjustment sleeve enables fastening without dead space.Hygienic fasteners, such as screws and nuts SM 1265-9 and 1265-10, as well as It
is imperative that the mounting holes are inserted in the correct position. Due to the
wiper or the ball seal, the moving components are sealed against the environment.The high quality finish prevents adherence of dirt and facilitates cleaning.The values listed in the table for static load capacity refer to a purely vertical load
in relation to the leveling foot. Under normal operating conditions bending loads or
angular loads are not uncommon and result in a reduction of load capacity.
RoHS-compliant: yes
