Levelling foot - HYGIENIC DESIGN | SM 3150

SCHOLZ MECHANIK GmbH

Diameter 1	Diameter 2	Form	Length 1	Product number	Unit price	Buy

Product information "Levelling foot - HYGIENIC DESIGN | SM 3150"

made of stainless steel
with adjustment sleeve

Material:
foot plate: stainless steel 1.4301 (AISI 304), turned
spindle: stainless steel 1.4301 (AISI 304), turned
adjustable sleeve: stainless steel 1.4301 (AISI 304), turned
seals: blue, FDA compliant

Hardness:
- sealing ring: NBR, hardness 70 ±5 Shore A
- wiper: TPU, hardness 95 ±5 Shore A
- joint sealing ring: H-NBR, hardness 85 ±5 Shore A
- bottom seal: Silikon, hardness 85 ±5 Shore A

Form A: without bore
Form B: with bore

These adjustable feet are certified according to the guidelines of 3-A Sanitary Standards, Inc. and DGUV Test
and the adjustable feet Form B with fixing holes are also certified according to EHEDG
and are therefore particularly suitable for use in hygienic areas.

The bottom seal protects the area beneath the foot plate from dirt.
For this, the foot must be screwed on using the mounting holes and compressed accordingly.
The sealing ring above the adjustment sleeve enables fastening without dead space.
Hygienic fasteners, such as screws and nuts SM 1265-9 and 1265-10, as well as It is imperative that the mounting holes are inserted in the correct position. Due to the wiper or the ball seal, the moving components are sealed against the environment.
The high quality finish prevents adherence of dirt and facilitates cleaning.

The values listed in the table for static load capacity refer to a purely vertical load in relation to the leveling foot. Under normal operating conditions bending loads or angular loads are not uncommon and result in a reduction of load capacity.

RoHS-compliant: yes

Compliance:	RoHS compliant
Element type:	Adjustable feet / Levelling feet, Feet / Wheels
For use in sensitive areas:	Hygienic Design
Material:	Bushing/Screw: Stainless Steel, Stainless steel
Speciality:	With mounting holes, Without mounting holes, With sealing ring

Accessory Items

Sealing ring - HYGIENIC DESIGN | SM 1291-15

Material: H-NBR: hydrogenated acrylonitrile butadiene rubberbluetemperature resistant -25 °C to +150 °CFDA compliantHardness: 85 ±5 Shore A As unassembled, the sealing rings haver the “actual dimensions” as stated in the table.To ensure a reliable sealing, an installation space must be provided in the component as shown in the drawing. This ensures that when the sealing ring is installed, it will be subject to the necessary pressure without excess load. All contact surfaces should have a minimum surface quality of Ra 0.8 μm.On request: - Ethylene-propylene-diene rubber (EPDM) temperature-resistant -40 °C to +120 °C - Fluorine rubber (FKM) temperature-resistant -5 °C to +200 °C RoHS-compliant: yes Other items from the HYGIENIC DESIGN range SM 1179-1 Clamping lever SM 1179-2 Clamping lever with screw SM 1206-4 Star knobs SM 1206-5 Three-star grips SM 1207-2 Wing nuts / T-handles SM 1265-7/8 Knobs SM 1265-9/10 Nuts/screws SM 1265-11/12 Screws, low SM 1265-13 Spacers SM 1268-4/5 Latches SM 1269-5 Bow handles SM 1273-32/33 Locking bolt SM 1291-15 Sealing ring SM 1291-16 Wiper SM 3150 Adjustable feet SM 3151 Cover sleeves

From €1.30* incl. VAT

Details

Wiper - Hygienic Design | SM 1291-16

Material:TPU: Thermoplastic polyurethanebluetemperature resistant -20 °C to +110 °CFDA complianthardness: 95 ±5 Shore A When used in hygienic areas, these wipers can be used to seal axially or radially moving components with a cylindrical cross-section against their bearing position.With their specially shaped sealing lip, the wipers prevent the formation of dead spaces where dust can accumulate. Commercially available wipers are not suitable for this purpose due to a 45° chamfer on the inner edge of the sealing lip. As delivered, or unassembled, the wipers have the “actual dimensions” as stated in the table. To guarantee a secure fit and a reliable seal, the specified installation space must be provided at the bearing position. This ensures that the wiper undergoes the necessary deformation during installation. All surfaces in contact with the wiper should have a minimum surface quality of Ra 0.8 μm. RoHS-compliant: yes Other items from the HYGIENIC DESIGN range SM 1179-1 Clamping lever SM 1179-2 Clamping lever with screw SM 1206-4 Star knobs SM 1206-5 Three-star grips SM 1207-2 Wing nuts / T-handles SM 1265-7/8 Knobs SM 1265-9/10 Nuts/screws SM 1265-11/12 Screws, low SM 1265-13 Spacers SM 1268-4/5 Latches SM 1269-5 Bow handles SM 1273-32/33 Locking bolt SM 1291-15 Sealing ring SM 1291-15 Sealing rings SM 3150 Adjustable feet SM 3151 Cover sleeves

From €5.22* incl. VAT

Details

Similar Items

Leveling pad | SM 1270-2 A

Jointed plate Material:Form A: ball bearing: heat-treated blackened pad: steelForm DN: ball bearing: stainless steel pad: Thermoplast (POM)Form NI: ball bearing: stainless steel pad: stainless steel Use as feet and pressure pieces.They can be connected with most types of screws.Non-parallel contact surfaces up to max. 15° degrees can be levelled out.Temperature application range thermoplastic version from - 30 °C to + 80 °C. RoHS-compliant: yes

From €10.07* incl. VAT

Details

Leveling pad, anti-slip | SM 1270-2 AC

with ball element and rubber capMaterial:Form AC: ball bearing: heat-treated steel, tempered, blackenedpad: heat-treated steel, tempered, blackenedForm CDN:ball bearing: stainless steel 1.4305pad: Thermoplast (POM), white Form CNI: ball bearing: stainless steel 1.4305pad: stainless steel 1.4305Form C: with rubber cap for anti slipRoHS-compliant: yesUse as adjustable foot and thrust piece.Non-parallel bearing surfaces up to max. 15° degrees can be compensated.The plastic cap on the joint plate prevents slipping.The static load capacity is limited by the permissible load capacity of the joint ball.The values in the tables assume are based on a pure compressive load perpendicular to the joint foot.Bending/ buckling loads lead to a reduction in the load capacity and must be taken into account accordingly.

From €11.54* incl. VAT

Details

Leveling pad, bolt | SM 1270-2 B

with bolt and ball element Material:Form B: ball element with bolt: heat-treated blackened pad: steelForm BDN: ball element with bolt: stainless steel pad: Thermoplast (POM)Form BNI: ball element with bolt: stainless steel pad: stainless steel To be used as feet and thrust pads.Non-parallel contact surfaces up to max. 15° degrees can be levelled out.Temperature application range thermoplastic version from - 30 °C to + 80 °C. RoHS-compliant: yes

From €18.06* incl. VAT

Details

Leveling pad with bolt, anti-slip | SM 1270-2 BC

with bolt, ball element and rubber capas anti-slip deviceMaterial:Form BC: ball bearing with bolt: heat-treated steel, tempered, blackenedpad: heat-treated steel, tempered, blackenedForm BCDN: ball bearing with bolt: stainless steel 1.4305pad: Thermoplast (POM), whiteForm BCNI: ball bearing with bolt: stainless steel 1.4305pad: stainless steel 1.4305Form C: with rubber cap for anti slipRoHS-compliant: yesUse as adjustable foot and thrust pieceNon-parallel bearing surfaces up to max. 15° degrees can be compensated.The plastic cover on the mounting pad prevents slipping.The static load capacity is limited by the permissible load capacity of the joint ball. The values in the tables assume are based on a pure compressive load perpendicular to the joint foot. Bending/ buckling loads lead to a reduction in the load capacity and must be taken into account accordingly.

From €19.54* incl. VAT

Details

Levelling foot | SM 3050

with steel spindle and plastic baseMaterial:foot: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant up to 100° black, matt threaded stud: steel, grade 5.8zinc plated, blue passivatedhexagon nut: steelzinc plated, blue passivatedrubber underlay: NBR 70 Shore hardnessblackForm A: without nut, without rubber underlayForm B: with nut, without rubber underlayForm C: without nut, with rubber underlay Form D: with nut, with rubber underlayhigh static load capacity due to high-quality plasticand slightly stepped shape.Load distribution through ribbing over a large area.Articulated feet are supplied assembled, but can be dismantled. Data on static load capacity are approximate values under exclusion of any liability for possible consequential damage when using the swivel feet.If the values are exceeded, permanent deformation or breakage of the plastic plate is possible.The values were determined by means of a series of tests in which a limited number of articulated feet were loaded for a limited time with a static force acting perpendicular to the plate.The suitability of the leveling feet for the respective application must be determined by the user.RoHS-compliant: yes

From €6.00* incl. VAT

Details

Levelling foot, stainless steel | SM 3051

with stainless steel spindle and plastic baseMaterial: foot: plastic Technopolymer (Polyamide PA)glass fibre reinforcedtemperature resistant up to 100° Cblack, mattthreaded stud: stainless steel, 1.4305hexagon nut: stainless steel , 1.4301rubber underlay: NBR 70 Shore hardnessblackForm A: without nut, without rubber underlayForm B: with nut, without rubber underlayForm C: without nut, with rubber underlayForm D: with nut, with rubber underlayhigh static load capacity due to high-quality plasticand slightly stepped shape,Load distribution through ribbing over a large area.Articulated feet are supplied assembled, but can be dismantled.Data on static load capacity are approximate values under exclusion of any liabilityfor possible consequential damage when using the swivel feet.If the values are exceeded, permanent deformation or breakage of the plastic plate is possible.The values were determined by means of a series of tests in which a limited number of articulated feetwere loaded for a limited time with a static force acting perpendicular to the plate.The suitability of the leveling feet for the respective application must be determined by the user.RoHS-compliant: yes

From €9.62* incl. VAT

Details

Levelling foot | SM 3060

with steel spindle and plastic base Material:foot: plastic Technopolymer (PA)glass fibre reinforcedblack, matttemperature resistant up to 100° Cthreaded stud: steel, tensile strength class 5.8zinc plated, blue passivatedhexagon nut: steel ISO 4032zinc plated, blue passivatedrubber pad: (NBR) 70 Shoreblack Form B: with nut, without rubber padForm D: with nut, with rubber pad Levelling feet are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.Levelling feet are supplied assembled, but are removable. Information:If the values of the static load capacity given in the table are exceeded, the plastic foot plate may break. The values were determined by a series of tests in which a limited number of articulated feet were subjected to a static force acting perpendicular to the foot plate for a limited time. Depending on the application and load case, however, a safety factor must be taken into account so that the permissible load capacity is lower than the value given in the table. RoHS-compliant: yes

From €3.57* incl. VAT

Details

Levelling foot, thread stud | SM 3061

with stainless steel spindle and plastic base Material:foot: plastic Technopolymer (PA)glass fibre reinforcedblack, matttemperature resistant up to 100° Cthreaded stud: stainless steel AISI 303hexagon nut: steel ISO 4032, stainless steel AISI 304rubber pad: (NBR) 70 Shore, black Form B: with nut, without rubber padForm D: with nut, with rubber pad Levelling feet are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.Levelling feet are supplied assembled, but are removable. Information:If the values of the static load capacity given in the table are exceeded, the plastic foot plate may break. The values were determined by a series of tests in which a limited number of articulated feet were subjected to a static force acting perpendicular to the foot plate for a limited time.Depending on the application and load case, however, a safety factor must be taken into account so that the permissible load capacity is lower than the value given in the table. RoHS-compliant: yes

From €6.56* incl. VAT

Details

Levelling foot, threaded bushing | SM 3062

with steel threaded bushing and plastic base Material:foot: plastic Technopolymer (PA)glass fibre reinforcedblack, matttemperature resistant up to 100° Cthreaded bush: steel, tensile strength class 5.8zinc plated, blue passivatedhexagon nut: steel ISO 4032zinc plated, blue passivatedrubber pad: (NBR) 70 Shoreblack Form A: with nut, without rubber padForm C: with nut, with rubber pad Levelling feet are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.Levelling feet are supplied assembled, but are removable. Information:If the values of the static load capacity given in the table are exceeded, the plastic foot plate may break. The values were determined by a series of tests in which a limited number of articulated feet were subjected to a static force acting perpendicular to the foot plate for a limited time.Depending on the application and load case, however, a safety factor must be taken into account so that the permissible load capacity is lower than the value given in the table. RoHS-compliant: yes

From €2.96* incl. VAT

Details

Levelling foot, threaded bush | SM 3063

with threaded bush from stainless steel and plastic base Material:foot: plastic Technopolymer (PA)glass fibre reinforcedblack, matttemperature resistant up to 100° Cthreaded bush: stainless steel AISI 303hexagon nut: steel ISO 4032, stainless steel AISI 304rubber pad: (NBR) 70 Shoreblack Form A: with nut, without rubber padForm C: with nut, with rubber pad Levelling feet are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.Levelling feet are supplied assembled, but are removable. Information:If the values of the static load capacity given in the table are exceeded, the plastic foot plate may break. The values were determined by a series of tests in which a limited number of articulated feet were subjected to a static force acting perpendicular to the foot plate for a limited time.Depending on the application and load case, however, a safety factor must be taken into account so that the permissible load capacity is lower than the value given in the table. RoHS-compliant: yes

From €4.20* incl. VAT

Details

Levelling foot | SM 3100

Spindle and foot plate made of steel Material: foot: steelzinc plated, blue passivated threaded stud: steel zinc plated, blue passivated hexagon nut: ISO 4032, steelzinc plated, blue passivated rubber underlay: (NBR) 70±5 Shore, black vulcanized plastic cap: Elastomer (TPE) 80 Shore, black Form OS: without rubber cap, with nut Form KR: with rubber underlay clipped on, with nut Form GV: with rubber underlay vulkanized, with nut The levelling feet can be used in some combinations of base plates and adjustable spindle versions.Screw versions M08/M10/M12 with external hexagon SW1. Screw versions M16/M20/M24 with hexagon socket at the top and wrench flat SW2 at the bottom. The base plate with the rubber underlay protects sensitive surfaces and reduces lateral slippage. The levelling feet are supplied fully assembled and are not removable. RoHS-compliant: yes

From €4.20* incl. VAT

Details

Levelling foot, stainless steel | SM 3105

Levelling foot, stainless steel Material: foot: stainless steel No. 1.4301matt shot-blastedscrew: stainless steel, 1.4305hexagon nut: ISO 4032, 1.4305assembly screw.: stainless steeloctitedplastic cap: Elastomer (TPE) 80 Shorerubber underlay: (NBR) 70±5 Shore, black vulcanized Form OS: without rubber cap, with nutForm KR: with rubber underlay clipped on, with nutForm GV: with rubber underlay vulkanized, with nut The levelling feet can be used in some combinations of base plates and adjustable spindle versions.Screw versions M08/M10/M12 with external hexagon SW1. Screw versions M16/M20/M24 with hexagon socket at the top and wrench flat SW2 at the bottom. The base plate with the rubber underlay protects sensitive surfaces and reduces lateral slippage. The levelling feet are supplied fully assembled and are not removable. RoHS-compliant: yes

From €5.65* incl. VAT

Details

Levelling foot - HYGIENIC DESIGN | SM 3150

made of stainless steelwith adjustment sleeve

made of stainless steel
with adjustment sleeve