Locating pin, conical | SM 1020-3

SCHOLZ MECHANIK GmbH

from €11.09*

€11.09*

Prices incl. VAT plus shipping costs

Available in 5 days

Delivery time: See variant in the table

This product is available in 6 versions.

Show all variants

Diameter

06,00

08,00

10,00

Length

19,5

23,5

27,5

Material

Edelstahl/stainless_steel

Stahl/steel

Product number: 241107

Description Datasheet

Diameter	Length	Material	Product number	Unit price	Buy

Product information "Locating pin, conical | SM 1020-3 "

for guide bushings with conical bore

Material:
ST: steel
gehärtet ≈ HRC 62 +4
NI: stainless steel

Fitting dimensions d p6 ground.
Use for Guide bushes with conical bore SM 1273-54 und SM 1273-55 sim. to DIN 179 / DIN 172.
The shaft tolerance to p6 ensures a perfect fit in a bore to H7.
The chamfer l3 facilitates the fitting.

RoHS-compliant: yes

Element type:	Round bars / dowel pins
Material:	Steel - hardened
Surface:	grinded

Similar Items

Locating pin | SM 1020-2

Diameter: 08,00 | Length: 24,00

cylindricalfor positioning bushings DIN 172 / DIN 179 Material: steelhardened, groundHardness: ≈ HRC 62+4 Fit dimensions d p6 / d h6 groundLocating pins SM 1020-2 are normally used in conjunction with locating bushes SM 1000 and SM 1002.The shaft tolerance to p6 ensures a perfect fit in a bore to H7. The chamfer l3 facilitates the fitting. RoHS-compliant: yes

Variants from €4.59* incl. VAT

€5.22* incl. VAT

Details

Accessory Items

Guide bushing, conical | SM 1273-54

Diameter 1: 08,00 | Length 1: 10,00 | Material: Stahl/steel

without collarwith conical borefor indexing plungers SM 1273-51 Material:ST: special steelhardened (HRC 62 ±2) and groundNI: stainless steelhardened and ground These guide bushings with conical bore will be used for the latch bore of indexing plungers SM 1273-51. RoHS-compliant: yes

Variants from €7.02* incl. VAT

€7.77* incl. VAT

Details

Guide bushing, conical | SM 1273-55

Diameter 1: 08,00 | Length 1: 10,00 | Material: Stahl/steel

with collar with conical bore for indexing plungers SM 1273-51 Material:ST: special steelhardened (HRC 62 ±2) and groundNI: stainless steelhardened and ground The positioning bushings SM 1273-54 and SM 1273-55 with conical bore are used forthe detent bore of indexing plungers SM 1273-51 and allow precise positioning.The length l7 of the indexing pin is determined by the depth of penetration of the indexingpin into the cone of the bushing. The length l8 must ensure complete disengagement of the indexing pin. When engaged, the pin must have at least 0.5 mm residual stroke so that the conical part of the pin is seated in the cone of the positioning bush without play.To accommodate the positioning bushings (outer Ø with tolerance n6), the locating holes hould have tolerance H7. RoHS-compliant: yes

Variants from €12.71* incl. VAT

€13.10* incl. VAT

Details