Machine foot | SM 1270-5

Variants table
Form	Hight h	Product number	Unit price	Buy

Product information "Machine foot | SM 1270-5 "

Material:
NI: stainless steel 1.4305
KU: plastic
ST: steel, zinc plated - Remaining stocks

on request:
STB: Steel, hardened and burnished
dimensions d / d₂ / h₁ slightly different

RoHS-compliant: yes

Machine feet are used for load transfer and the elastic mounting of all types of machines.

Compliance:	RoHS compliant
Element type:	Feet / Wheels, Thrust pieces
Material:	Plastic, Stainless steel, Steel
Surface:	Steel - zinc plated

Similar Items

Thrust pad - DIN 6311 | SM 1270

with snap ring Material: ST: steel case hardened, blackenedNI: stainless steelSpring retainer inlayed.Use with tommy screws DIN 6304 / SM 1235 and DIN 6306 / SM 1236, with screws with pressure pins DIN 6332 / SM 1240 also as feet.The swivelling connection of the thrust pin and thrust piece enables adaptation to uneven clamping surfaces or clamping surfaces that are not perpendicular to the screw axis and prevents the rotary movement of the screw from being transferred to the clamping surface during clamping. Mountage: The thrust piece is to be held in such a way that the snap ring lies in the recess and points with the open side downwards. The bolt is tilted towards the open side of the snap ring as far as possible and pressed in. RoHS-compliant: yes

From €1.81* incl. VAT

Details

Thrust pad, flat - DIN 6311 | SM 1270-1

with snap ringMaterial: ST: steel case hardened, blackened NI: stainless steelSpring retainer inlayed.Low model with increased thrust area.Use with tommy screws DIN 6304 / SM 1235 and DIN 6306 / SM 1236, with screws with pressure pins DIN 6332 / SM 1240 also as feet. The swivelling connection of the thrust pin and thrust piece enables adaptation to uneven clamping surfaces or clamping surfaces that are not perpendicular to the screw axis and prevents the rotary movement of the screw from being transferred to the clamping surface during clamping.Mountage: The thrust piece is to be held in such a way that the snap ring lies in the recess and points with the open side downwards.The bolt is tilted towards the open side of the snap ring as far as possible and pressed in.RoHS-compliant: yes

From €3.86* incl. VAT

Details

Hexagon collar nut, conical seat | SM 1270-3

with small surfaceMaterial: heat-treated steel, temperedblackenedRoHS-compliant: yes The hexagon nut with conical socket is a firmly connected unit consisting of a hexagon nut and conical socket, which can be used to compensate for non-parallel clamping surfaces with a swivelling range of up to max. 3°. The nut and ball socket are captively connected to each other.

From €9.07* incl. VAT

Details

Thrust pad | SM 1270-11

with or without plastic capMaterial:ST: steel case hardened, blackenedNI: stainless steelRetaining spring: Stainless steel 1.4310Plastic cap:natural color, (Polyacetal POM),temperature resistant up to100 °CForm A: without plastic capForm K: with plastic capThe thrust pieces adapt to uneven or cylindrical surfaces and prevent transmission of the rotary movement of the screw to the workpiece. The plastic caps prevent damage to delicate workpieces.Due to the special shape of the retaining spring, the thrust piece can be easily attached to the thrust pin and removed again without any problems.Use with tommy screws DIN 6304 / SM 1235 and DIN 6306 / SM 1236,with screws with pressure pins DIN 6332 / SM 1240 also as feet.RoHS-compliant: yes

From €2.64* incl. VAT

Details