Kegelpfanne D - DIN 6319

DIN / ISO:	DIN 6319
Material:	Stainless steel, Steel
Type:	Mechanical clamping elements

Ähnliche Artikel

Spacing washer | SM 1126

for countersunk screws Material: ST: steel, unhardened, zinc coatedNI: stainless steelPlease inquire: STB: Steel, turned, burnished Spacing washers are fastened with countersunk screws DIN 963 or DIN 7991 at the front faces of shaft ends and close these as a collar. Unwanted turning or loosening of the washer can be avoided with a cylindrical pin. RoHS-compliant: yes

From €1.29* incl. VAT

Details

Washer - DIN 6340 | SM 1125

Material: steel, tempered (1200-1400 N/mm2) RoHS-compliant: yes

From €0.92* incl. VAT

Details

Pressing washer | SM 1286

Material: special steelhardened, blackenedbackground ground RoHS-compliant: yes

From €4.91* incl. VAT

Details

Spacer | SM 1270-10

for Spherical levelling washers SM 1270-9 Material: ST: steel, surface zinc plated and chromated NI: stainless steel When adjustment travel Δ h is insufficent, the spacer is utilized to bridge gaps. RoHS-compliant: yes

Price on request

Details

Washer | SM 1291-14

Tapered washer Material: steel C45heat treated For hexagon socket head cap screws DIN 912 (SM1291).

From €1.25* incl. VAT

Details

Washer, ground | SM 1125-1

surface-ground on both sidessim. to DIN 6340 Material: steel, hadened and on both sides surface grinded RoHS-compliant: yes

From €2.95* incl. VAT

Details

Spherical washer - DIN 6319 | SM 1130 C

Material:ST: steel, case hardenedNI: stainless steel RoHS-compliant: yes

From €0.61* incl. VAT

Details

Conical seat G - DIN 6319 | SM 1130 G

Material: ST: steel, heat-treatedNI: stainless steel Due to large dia and thickness more suitable to match slotted clamps. RoHS-compliant: yes

From €1.40* incl. VAT

Details

Washer - DIN 125 A/ISO 7089 | SM 1291-13

Washer DIN 125 A / ISO 7089 Material: ST: Stahl, verzinkt NI: Edelstahl rostfrei KU: Teflon (weiß)

From €0.04* incl. VAT

Details

Zubehör

Spherical washer - DIN 6319 | SM 1130 C

Diameter 1: 10.5 | Form: C | Material: ST

Material:ST: steel, case hardenedNI: stainless steel RoHS-compliant: yes

Variants from €0.61* incl. VAT

€0.90* incl. VAT

Details

Hexagon nut | SM 1120

Diameter 1: M27 | Material: ST

with spherical contact surface on one sideDIN 6330 and similar Material: ST: steel, grade 10NI: stainless steel Article with selection option with "SW"correspond to the old standard. Suitable for this parts: Flat end matching hardened washers SM 1125 / DIN 6340. With spherical end matching taper face of washers SM 1130D or G / DIN 6319 D or G.Ball radius "r" suitable for tapered cups SM 1130 D / DIN 6319.To compensate for non-parallel clamping surfaces. m = 1.5 x d. RoHS-compliant: yes

Variants from €0.71* incl. VAT

€10.48* incl. VAT

Details

Stud screw - DIN 6379 | SM 1100

Diameter: M16 | Length: 500 | Quality: 8.8

Material: steel, heat-treated: M06 - M12: grade 10.9M14 - M42: grade 8.8M12 - M24: grade 12.9 rolled threadRemaining quantities are available from SM 1100M22X250 8.8, SM 1100M22X350 8.8. The articles are not available for re-purchase. RoHS-compliant: yes

Variants from €1.29* incl. VAT

€22.36* incl. VAT

Details

Conical seat D - DIN 6319 | SM 1130 D