Spacer | SM 1270-10

Compliance:	RoHS compliant
Element type:	Discs, Level regulation
Material:	Stainless steel, Steel
Surface:	Steel - zinc plated

Accessory Items

Precision adjuster | SM 1270-7

Ball head precision adjuster Material: ST: steel, surface zinc plated and chromated NI: stainless steel A1 The levelling sets are used for levelling, adjusting and linking operations. Precise installation of two non parallel planes at a required gradient up to α 4° is allowed by the spherical washers. The C-Spanner SM1270-12 allows a stepless and precise setting and locking by the fine thread. A Circlip serves as a height limiter for the maximum height. Fzus = static net loadFges = total loadThe static net load Fadd is calculable after subtracing the pre-load (bolt strength class 8.8) from the total load Ftot. RoHS-compliant: yes

From €45.40* incl. VAT

Details

Levelling adjuster | SM 1270-6

Material:NI: stainless steel A1ST: steel, surface zinc plated and chromated If small dimensions are given, the levelling sets are used for levelling, adjusting and linking operations. The C-Spanner SM1270-12 allows a stepless and precise setting and locking by the fine thread.A Circlip serves as a height limiter for the maximum height. Fzus = static net loadFges = total loadThe static net load Fadd is calculable after subtracing the pre-load (bolt strength class 8.8) from the total load Ftot. RoHS-compliant: yes

From €30.84* incl. VAT

Details

Precision leveller | SM 1270-8

Material: NI: stainless steel A1ST: steel, surface zinc plated and chromated Form A: without lock nutForm K: with lock nut For levelling, adjusting and connecting larger adjustment ranges from 15 to 55 mm.The C-Spanner SM1270-12 allows a stepless and precise setting and locking by the fine thread. A Circlip serves as a height limiter for the maximum height. Fzus = static net loadFges = total loadThe static net load Fadd is calculable after subtracing the pre-load (bolt strength class 8.8) from the total load Ftot. RoHS-compliant: yes

From €37.04* incl. VAT

Details

Similar Items

Spacing washer | SM 1126

for countersunk screws Material: ST: steel, unhardened, zinc coatedNI: stainless steelPlease inquire: STB: Steel, turned, burnished Spacing washers are fastened with countersunk screws DIN 963 or DIN 7991 at the front faces of shaft ends and close these as a collar. Unwanted turning or loosening of the washer can be avoided with a cylindrical pin. RoHS-compliant: yes

From €1.02* incl. VAT

Details

Washer - DIN 6340 | SM 1125

Material: steel, tempered (1200-1400 N/mm2) RoHS-compliant: yes

From €0.92* incl. VAT

Details

Conical seat D - DIN 6319 | SM 1130 D

Material: ST: steel, case hardenedNI: stainless steel Limited for use on flat closed ring areas (not allowed for elongated holes). RoHS-compliant: yes

From €0.81* incl. VAT

Details